Composites are combinations of two more separate materials on a microscopic level, in a controlled manner to give desired properties. The properties of a composite will be different from those of the constituents in isolation.
http://4.bp.blogspot_7UH1P0Umjhk/SUoABV1KWsI/AAAAAAAABa8/XhULIWDmpb8/s320/Products+of+Composite+material.gif
When two materials are combined together to form a composite, one of the materials will be in Reinforcing phase and the other material will be in Matrix phase. Typically, reinforcing material in the f ....etc

[:=Read Full Message Here=:]

Metal matrix composite

A metal matrix composite (MMC) is composite material with at least two constituent parts, one being a metal. The other material may be a different metal or another material, such as a ceramic or organic compound. When at least three materials are present, it is called a hybrid composite. An MMC is complementary to a cermet.Contents
1 Composition
1.1 Matrix
1.2 Reinforcement
2 Manufacturing and forming methods
3 Applications
4 See also
5 References
6 External links



Composition

MMCs are made by ....etc

[:=Read Full Message Here=:]

composite matrial about ieee paper composite materials pdf free download in to the right box for getting free material and support from us/dedicated premium members...
Its a free service. ....etc

[:=Read Full Message Here=:]

ABSTRACT
The subject gives a brief look on the suitability of composite leaf spring on vehicles and their advantages. Efforts have been made to reduce the cost of composite leaf spring to that of steel leaf spring. The achievement of weight reduction with adequate improvement of mechanical properties has made composite a very replacement material for convectional steel. Material and manufacturing process are selected upon on the cost and strength factor. The design method is selected on the basis of mass production.
From t ....etc

[:=Read Full Message Here=:]

Aluminium(Al) ,Copper(Cu) and Magnesium(Mg) alloys can be combined with Silicon carbide(SiC),alumina(Al2O3),boron carbide(B4C),graphite(Gr)and other particulate fiber or whiskers reinforcements to significantly increase stiffness or improve the thermophysical properties of components.The application arena for for metal matrix composites is continually expanding as the cost effectiveness mature.Using various properties of metal matrix composites,they can be widely applied in the following fields. 1.Space 2.Commercial 3.Marine 4.Medical. Composit ....etc

[:=Read Full Message Here=:]

Design, Analysis, Fabrication And Testing Of A Composite Leaf Spring


In order to conserve natural resources and economize energy, weight reduction has been the main focus of automobile manufacturers in the present scenario. Weight reduction can be achieved primarily by the introduction of better material, design optimization and better manufacturing processes. The suspension leaf spring is one of the potential items for weight reduction in automobiles as it accounts for 10% - 20% of the unsprung ....etc

[:=Read Full Message Here=:]

Deterioration of reinforced concrete structures due to corrosion of steel is a cause of global concern. The losses due to corrosion every year run into millions of rupees and any solution to this universal problem of corrosion has a direct bearing economy of the country. It is estimated that about 30-40 percent of steel produced each year is used to replace corroded material.
In recent years, the construction industry has seen an increased demand to reinstate, rejuvenate, strengthen and upgrade existing concrete structures. This may be attrib ....etc

[:=Read Full Message Here=:]

Definition

In order to conserve natural resources and economize energy, weight reduction has been the main focus of automobile manufacturers in the present scenario. Weight reduction can be achieved primarily by the introduction of better material, design optimization and better manufacturing processes. The suspension leaf spring is one of the potential items for weight reduction in automobiles as it accounts for 10% - 20% of the unsprung weight. This achieves the vehicle with more fuel efficiency and improved riding qualities.

The intro ....etc

[:=Read Full Message Here=:]

Aluminium(Al) ,Copper(Cu) and Magnesium(Mg) alloys can be combined with Silicon carbide(SiC),alumina(Al2O3),boron carbide(B4C),graphite(Gr)and other particulate fiber or whiskers reinforcements to significantly increase stiffness or improve the thermophysical properties of components.The application arena for for metal matrix composites is continually expanding as the cost effectiveness mature.Using various properties of metal matrix composites,they can be widely applied in the following fields.
1.Space
2.Commercial
3.Marine
4. ....etc

[:=Read Full Message Here=:]

Definition

In order to conserve natural resources and economize energy, weight reduction has been the main focus of automobile manufacturers in the present scenario. Weight reduction can be achieved primarily by the introduction of better material, design optimization and better manufacturing processes. The suspension leaf spring is one of the potential items for weight reduction in automobiles as it accounts for 10% - 20% of the unsprung weight. This achieves the vehicle with more fuel efficiency and improved riding qualities.

The intro ....etc

[:=Read Full Message Here=:]