Composites are combinations of two more separate materials on a microscopic level, in a controlled manner to give desired properties. The properties of a composite will be different from those of the constituents in isolation.
http://4.bp.blogspot_7UH1P0Umjhk/SUoABV1KWsI/AAAAAAAABa8/XhULIWDmpb8/s320/Products+of+Composite+material.gif
When two materials are combined together to form a composite, one of the materials will be in Reinforcing phase and the other material will be in Matrix phase. Typically, reinforcing material in the f ....etc

[:=Read Full Message Here=:]

FLYING WINDMILLS OR FLYING ELECTRIC GENERATOR (FEG) TECHNOLOGY


PRESENTED BY: NABEEL.SUBER.KUNJU
Batch EEE-7
Sree Buddha College Of Engineering
Pattoor



INTRODUCTION
FEGs are proposed to harness kinetic energy in the powerful, persistent high altitude winds.

It is tethered to the earth and churning out electricity from the jet streams.

This energy source is well suited for rural or low populated areas.

FEG technology is just cheaper, cleaner and can provide mor ....etc

[:=Read Full Message Here=:]

flying wind mills technology pdf file ....etc

[:=Read Full Message Here=:]

hiiiii send me this topic pdf and ppt ....etc

[:=Read Full Message Here=:]

Presented By:
Ngangkham Peter Singh


Composite materials and technology in the manufacturing of windmills
Windmill history
 200 B.C.-1st wind machines used in Persia for grinding grains
 7th century- 1st practical windmill used in Sistan pumping and grinding
 14th Century- Dutch windmills were in use to drain areas of the Rhine River delta
 1887- 1st electricity generation in Scotland by James Blyth
 1888- 1st automatically operated wind turbine was built in Cleveland by Charle ....etc

[:=Read Full Message Here=:]

Flying Windmills or Flying Electric Generator (FEG) technology

ABSTRACT
High Altitude Wind Power uses flying electric generator (FEG) technology in the form of what have been more popularly called flying windmills, is a proposed renewable energy project over rural or low - populated areas, to produce around 12,000 MW of electricity with only 600 well clustered rotorcraft kites that use only simple auto gyro physics to generate far more kinetic energy than a nuclear plant .
According to Sky Wind Po ....etc

[:=Read Full Message Here=:]

Presented By
Mallappa.IG


Introduction.
 Composite materials are particularly attractive to aviation and aerospace applications because of their exceptional strength and stiffness-to-density ratios and superior physical properties.
 As the technology matured, the use of composite materials for primary structures such as wings and fuselages has increased. Initial applications of composite materials to aircraft structures were in secondary structures such as fairings, small doors and control surfaces ....etc

[:=Read Full Message Here=:]

Abstract
This report focuses on two examples of Micro-Nano Technology (MNT) in an attempt to plot the way forward for commercializing these MNT devices. The first example is one that has recently gone from a research idea and prototype (2000) to commercialization (2003) and the second is a recently developed (2004) composite suggested here for commercialization. The first example is a Marco Fibre Composite„¢ (MFC) actuator and sensor invented by NASA Langley Research Center in a quest to develop a high force actuation system for use ....etc

[:=Read Full Message Here=:]

plz send me this topic pdf and ppt ....etc

[:=Read Full Message Here=:]

i have to give my presentation tomorrow can you please send me the slides ....etc

[:=Read Full Message Here=:]