There is a need to remove heat from compact spaces (on the order of inches on a side) in a variety of cooling applications.  Some examples include power electronics, transformers, base stations in cellular communications, automotive electronics, portable and wearable electronics, electric vehicle batteries, power distribution systems in computers, military electronics and avionics, and food processing.  In most cases, the use of sophisticated cooling techniques (externally simple, yet highly en ....etc

[:=Read Full Message Here=:]

Aluminium(Al) ,Copper(Cu) and Magnesium(Mg) alloys can be combined with Silicon carbide(SiC),alumina(Al2O3),boron carbide(B4C),graphite(Gr)and other particulate fiber or whiskers reinforcements to significantly increase stiffness or improve the thermophysical properties of components.The application arena for for metal matrix composites is continually expanding as the cost effectiveness mature.Using various properties of metal matrix composites,they can be widely applied in the following fields. 1.Space 2.Commercial 3.Marine 4.Medical. Composit ....etc

[:=Read Full Message Here=:]

Babbitt metal, also called white metal, is an alloy used to provide the bearing surface in a plain bearing. It was invented in 1839 by Isaac Babbitt in Taunton, Massachusetts, USA. The term is used today to describe a series of alloys used as a bearing metal. Babbit metal is characterized by its resistance to gall.

Common compositions for Babbitt alloys:
90% tin 10% copper
89% tin 7% antimony 4% copper
80% lead 15% antimony 5% tin

Originally used as a cast in place bulk bearing material, it is now more commonly used as a thin surface l ....etc

[:=Read Full Message Here=:]

INTRODUCTION


Metal foam is a dispersion of gas bubbles in a metallic bulk material
These are extremely lightweight materials
It contains 50% or more holes
They have some very promising properties

Structure o f metal foam
In metal foams cells are divided into distinct cells. the boundaries of these materials are made of solid material, the interior are voids.


Light weight Al foam
The best quality metal foams presently available
It has a density of from 300 to 1,000 kg/m³, th ....etc

[:=Read Full Message Here=:]

Novel shape memory effect (SME) and pseudoelastic behavior are discovered in single-crystalline Au, Cu, and Ni nanowires with lateral dimensions of 1.5-10 nm. Under tensile loading and unloading, these wires can recover elongations of up to 50%, well beyond the recoverable strains of 5-8% typical for most bulk shape memory alloys (SMAs). Results of atomistic simulations and evidences from experiments show that this phenomenon only exists at the nanometer scale and is associated with a reversible crystallographic lattice reorientation driven byt ....etc

[:=Read Full Message Here=:]

Aluminium(Al) ,Copper(Cu) and Magnesium(Mg) alloys can be combined with Silicon carbide(SiC),alumina(Al2O3),boron carbide(B4C),graphite(Gr)and other particulate fiber or whiskers reinforcements to significantly increase stiffness or improve the thermophysical properties of components.The application arena for for metal matrix composites is continually expanding as the cost effectiveness mature.Using various properties of metal matrix composites,they can be widely applied in the following fields.
1.Space
2.Commercial
3.Marine
4. ....etc

[:=Read Full Message Here=:]

The aim of this study is to propose simple and reliable techniques to assess the condition of metal oxide arrester based on the dielectric response techniques. A number of modern electrical diagnostics for Metal Oxide Surge Arrester (MOSA) are discussed in this paper. The techniques included return voltage, decay voltage and polarisation/depolarisation current measurement. The single and multipulse current (8/20micros) was used to artificially degrade the MOSA. The before and after diagnostic ....etc

[:=Read Full Message Here=:]

Novel shape memory effect (SME) and pseudoelastic behavior are discovered in single-crystalline Au, Cu, and Ni nanowires with lateral dimensions of 1.5-10 nm. Under tensile loading and unloading, these wires can recover elongations of up to 50%, well beyond the recoverable strains of 5-8% typical for most bulk shape memory alloys (SMAs). Results of atomistic simulations and evidences from experiments show that this phenomenon only exists at the nanometer scale and is associated with a reversible crystallographic lattice reorientation driven byt ....etc

[:=Read Full Message Here=:]

Metal matrix composite

A metal matrix composite (MMC) is composite material with at least two constituent parts, one being a metal. The other material may be a different metal or another material, such as a ceramic or organic compound. When at least three materials are present, it is called a hybrid composite. An MMC is complementary to a cermet.Contents
1 Composition
1.1 Matrix
1.2 Reinforcement
2 Manufacturing and forming methods
3 Applications
4 See also
5 References
6 External links



Composition

MMCs are made by ....etc

[:=Read Full Message Here=:]

Babbitt metal,
also called white metal, is an alloy used to provide the bearing surface in a plain bearing. It was invented in 1839 by Isaac Babbitt in Taunton, Massachusetts, USA. The term is used today to describe a series of alloys used as a bearing metal. Babbit metal is characterized by its resistance to gall.

Common compositions for Babbitt alloys:

* 90% tin 10% copper
* 89% tin 7% antimony 4% copper
* 80% lead 15% antimony 5% tin

Originally used as a cast in place bulk ....etc

[:=Read Full Message Here=:]