Jet impingement heat transfer – Part I: Mean and root-mean-square heat transfer and velocity distributions
Abstract
Impinging jets provide a means of achieving high heat transfer coefficients both locally and on an area averaged basis. The currentwork forms the first stage of a two part investigation of heat transfer distributions from a heated flat surface subject to an impinging airjet for Reynolds numbers from 10,000 to 30,000 and non-dimensional surface to jet exit spacing, H/D, from 0.5 to 8. In the present paper,the rel ....etc

[:=Read Full Message Here=:]

A Swarm-Intelligence-Based Protocol for Data Acquisition in Networks with Mobile Sinks- IEEE TRANSACTIONS ON MOBILE COMPUTING, VOL. 7, NO. 8,
-Glomosim

Abstract—
This paper addresses the problem of data acquisition in ad hoc and sensor networks with mobile sinks and proposes a protocol based on swarm intelligence, SIMPLE, to route data in such environments. The proposed protocol is based on a swarm agent that integrates the residual energy of nodes into the route selection mechanism and maximizes the network’s lifetime by even ....etc

[:=Read Full Message Here=:]

i need ppt on ranking on data manifold with sinkpoints for seminar please mail me at [email protected] ....etc

[:=Read Full Message Here=:]

I need a matlab simulation code for wsn routing to mobile sinks ....etc

[:=Read Full Message Here=:]

i am doing my project in wsn.
source code for mobile sink is required urgently ....etc

[:=Read Full Message Here=:]

ION CURRENT METHOD AS A HEAT SINK IN HIGH SPEED VLSI CHIPS




Introduction :

Today’s era of High Speed Technology involves in minorization of length of
transistor gates as well as increase in number of transistors per chip along with increase
in speed of execution. There are various technologies available for us for the high speed
execution of task.


Nanoscale Transistor Hotspots :

As silicon transistor channel lengths decrease below 100 n ....etc

[:=Read Full Message Here=:]

A heat sink is a term for a component or assembly that transfers heat generated within a solid material to a fluid medium, such as air or a liquid. Examples of heat sinks are the heat exchangers used in refrigeration and air conditioning systems and the radiator (also a heat exchanger) in a car. Heat sinks also help to cool electronic and optoelectronic devices, such as higher-power lasers and light emitting diodes (LEDs).
A heat sink is physically designed to increase the surface area in contact with the cooling flui ....etc

[:=Read Full Message Here=:]

source code of mobile sink based energy efficient clustering algorithm in matlab. how to implement the mobile sink in matlab with fixed path.? ....etc

[:=Read Full Message Here=:]

Presented by:
A.JohnBritto
C.Kanaga Raj
P.Senna Kesavan
A.VinothHEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE

ABSTRACT
3D induced finned steel-water heat pipe is carried out in this project.

All the main parameters that can significantly influence the heat transfer performance of heat pipe ,such as working temperature, heat flux, inclination angle, working fluid fill ratio (defined by the evaporatio ....etc

[:=Read Full Message Here=:]

High Conductance Heat Transfer Using Solar Heat Pipe Collector

presented by :-
MR. SHIVAJI D. YADAO1, MR. PRMENDRA J BANSOD2
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,

abstract
In recent years it has become increasingly important to develop methods for efficient transport of thermal energy from one location to another. Moreover the advent of the space age has stimulated research for heat transfer devices which are ....etc

[:=Read Full Message Here=:]