I would like to have the graph of gas flow Vs Valve opening.

[email protected]
[email protected] ....etc

[:=Read Full Message Here=:]

A gate valve is a valve that opens by lifting a round or rectangular gate out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Gate valves are sometimes used for regulating flow, but many are not suited for that purpose, having been designed to be fully opened or closed. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.


Gate valves are cha ....etc

[:=Read Full Message Here=:]

dimension of short patern ball valve size 2to 6150 class ....etc

[:=Read Full Message Here=:]

Name– Study of basic gates.
Aim – to study the working of basic gates like AND gate, OR gate and NOT gate.
Apparatus – IC 7404, IC 7408, IC 7432, circuit board, power supply +5V DC, LED, connecting wires, soldering iron, cutter etc.


Procedure –
1) You are given IC 7404, IC 7408 and IC 7432. Identify the ICs by reading their numbers and details from above given pin configurations and specifications.
2) Solder the circuit as shown in the circuit diagram.
3) Connec ....etc

[:=Read Full Message Here=:]

A gate valve is a valve that opens by lifting a round or rectangular gate out of the path of the fluid. The distinct feature of a gate valve is the sealing surfaces between the gate and seats are planar. The gate faces can form a wedge shape or they can be parallel. Gate valves are sometimes used for regulating flow, but many are not suited for that purpose, having been designed to be fully opened or closed. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low friction loss.


Gate valves are cha ....etc

[:=Read Full Message Here=:]

A ball valve (like the butterfly valve, one of a family of valves called quarter turn valves) is a valve that opens by turning a handle attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you 'see' the valve's position.

Ball valves are durable and usually work to achieve perfect shutoff even after years of di ....etc

[:=Read Full Message Here=:]

Introduction

From the day machines with reciprocating piston has come into existence efforts have been undertaken to improve the efficiency of the machines .The main drawbacks of reciprocating machines are the considerably large number of moving parts due to the presence of valves , greater inertial loads which reduces dynamic balance and leakage and friction due to the presence of piston rings . The invention urges has reached on Rotary machines .

One main advantage to be gained with a rotary machine is reduction of inertial loads and ....etc

[:=Read Full Message Here=:]

send me the report about this topic. this is our main project. So send to me my email id is [email protected]
....etc

[:=Read Full Message Here=:]

INTRODUCTION
Ball valves are most widely used valves for flow control in fluid flow lines for wide range of temperature changes (-200°C to 500°C).Most of the outlet valves of chemical plant storage were installed with ball valves for sudden closing and opening purposes. For petroleum and chemical plants it is very convenient to operate with ball valves.
Ball valves are used in situations where tight shut-off is required. The type of seat can vary with the valve pressure rating and m ....etc

[:=Read Full Message Here=:]

A ball valve (like the butterfly valve, one of a family of valves called quarter turn valves) is a valve that opens by turning a handle attached to a ball inside the valve. The ball has a hole, or port, through the middle so that when the port is in line with both ends of the valve, flow will occur. When the valve is closed, the hole is perpendicular to the ends of the valve, and flow is blocked. The handle position lets you 'see' the valve's position.

Ball valves are durable and usually work to achieve perfect shutoff even after years of di ....etc

[:=Read Full Message Here=:]