Presented by:
JAGADEESH D.L


Gas turbine
Introduction
A gas turbine is an engine where fuel is continuously burnt with compressed air to produce a stream of hot, fast moving gas. This gas stream is used to power the compressor that supplies the air to the engine as well as providing excess energy that may be used to do other work.
The engine consists of three main parts. The compressor, the combustor and the turbine.
The compressor usually sits at the front of the engine. There are two main types of compre ....etc

[:=Read Full Message Here=:]

i am doing final year project in autoadaptive edge detection for fire flames using matlab so i need matlab
....etc

[:=Read Full Message Here=:]

LABORATORY INVESTIGATION OF LOW SWIRL INJECTOR FOR LEAN PRE-MIXED GAS TURBINES


SEMINAR REPORT Submitted by
KIRAN .G.
S7M2
ROLL NO-30
Department Of Mechanical Engineering
College of Engineering, Thiruvananthapuram – 16
OCTOBER 2010




ABSTRACT

Laboratory experiments have been conducted to investigate the fuel effects on the

turbulent premixed flames produced by a gas turbine low-swirl injector (LSI). The

lean-blow off li ....etc

[:=Read Full Message Here=:]

sir,
please inform me about the matlab codes for 'An edge detection algorithm for flame and fire image processing' ....etc

[:=Read Full Message Here=:]

presented by:
Mudit Rajput



Abstract
CFD Modelling of Hot-Machining Operation is a machining method conducted on conventional machine tools in which work piece is preheated before cutting operation to become softer and thereby to reduce its shear strength. Here in Final Year B.Tech Project work this work is assigned to me for understanding the Hot-Machining prospects. In our Work the job to be machined is of High Manganese- Steel. As we know the machining of these materials has always been a great challenge. ....etc

[:=Read Full Message Here=:]

1.Which one of the process requires hare metal electrode and granular flux ?
(A)MAG welding
(B)MIG welding
(C )Submerged arc welding
(D)Stud welding

2.Spot welding, seam welding, flash butt welding is different methods of_____
(A)Resistance welding
(B)Friction welding
(C )Thermit welding
(D)Electro slag welding

3.Which type of electrode is used in submerged arc welding ?
(A)Cored electrode
(B)Light coated electrode
(C )Heavy coated electrode
(D)Bare wire

4.In which position is SAW welding is done ?
(A) ....etc

[:=Read Full Message Here=:]

1. OBJECTIVES

• The combustive properties of hydrogen that relate to its use as a combustive fuel
• The air/fuel ratio of hydrogen fuel mixtures and how it compares to other fuels
• The types of pre-ignition problems encountered in a hydrogen internal combustion engine and their solutions
• The type of ignition systems that may be used with hydrogen internal combustion engines
• Crankcase ventilation issues that pertain to hydrogen use in an internal combustion engine
• The thermal efficiency of hydrogen internal comb ....etc

[:=Read Full Message Here=:]

Silicon Carbide Photodiode Flame Temperature Sensors in an Active Combustion Pattern Factor Control System


Introduction
The combustion pattern factor in a gas turbine is a measurement
of the difference between the peak and average temperature at the
turbine inlet.
where Tpeak is the measured peak temperature at the combustor
exit and Tavg is the average of the measured temperatures.
The objective of active pattern factor control APFC is ....etc

[:=Read Full Message Here=:]

ECTION USING 8051
MICROCONTROLLER

Flame detection using 8051 microcontroller is an embedded system application which can perform task of detecting fire and temperature to prevent disasters without continuous human monitoring. The behavior of this system is based on LDR sensor information. It uses LDR and LED which gives input to microcontroller by means of sensing. When the system is powered-on, it detects the Light by using LDR, based on this the microcontroller LED is glowed. ....etc

[:=Read Full Message Here=:]

The safety of future manned missions to the moon and Mars hinges upon a proper understanding of how fires behave in outer space zero gravity/ micro gravity environments. Past studies have been limited to low oxygen concentrations and configurations in which the high velocity fuel enters an oxidizing atmosphere. However, one important fire scenario in outer space is a high velocity high oxygen oxidizer jet encountering fuel (an inverse flame configuration). This study focuses on flame shapes of oxygen- enhanced flames in inverse and normal diffu ....etc

[:=Read Full Message Here=:]

E-WASTE MANAGEMENT
SEMINAR REPORT
Submitted by
BINDU V.GOPAL
DEPARTMENT OF CIVIL ENGINEERING
COLLEGE OF ENGINEERING TRIVANDRUM


ABSTRACT


The electronic industry is the world’s largest and fastest growing manufacturing industry in the world. Discarded electronic and electrical equipment with all of their peripherals at the end of life is termed e-waste. The quantity of e-waste generated in developed countries equals 1% of total solidwaste on an average and is expected to grow to 2% by 2010 and i ....etc

[:=Read Full Message Here=:]

hey im in class 14 and i need hidden flames summary for my exam so could you please send that?
thank you
[email protected] ....etc

[:=Read Full Message Here=:]

you can mail me on [email protected] or [email protected]


Please send me the fortran codes for the following three thesis

1.) A MATHEMATICAL MODEL OF FLARE PLUME COMBUSTION
AND RADIATION
John E. Tanner, Jr.
Naval Weapons Support Center
Crane, Indiana
30 June 1975

oai.dtic.mil/oai/oai?verb=getRecord&metadataPrefix=html&identifier=ADA015629


2 .) RADIATIVE TRANSFER MODEL OF A PYROTECHrNIC FLAME
Bernard E. Doudce
Naval Arnmunit-ori Depot
Cralne, indiana A 26 Septernbp-r 1973

oai.dtic.mil/oai/oai?verb=getRecor ....etc

[:=Read Full Message Here=:]

stanza wise summary of the poem Hidden Flame by John Dryden and also tell me what is the meaning of Hidden Flame according to Dryden himself or literature
....etc

[:=Read Full Message Here=:]

The safety of future manned missions to the moon and Mars hinges upon a proper understanding of how fires behave in outer space zero gravity/ micro gravity environments. Past studies have been limited to low oxygen concentrations and configurations in which the high velocity fuel enters an oxidizing atmosphere. However, one important fire scenario in outer space is a high velocity high oxygen oxidizer jet encountering fuel (an inverse flame configuration). This study focuses on flame shapes of oxygen- enhanced flames in inverse and normal diffu ....etc

[:=Read Full Message Here=:]

PROJECT REPORT ON
FULLYAUTOMATED BURNER MANAGEMENT SYSTEM USING PLC

FACT (THE FERTILIZERS AND CHEMICALS TRAVANCORE LIMITED) was set up in 1944 on the banks of river Periyar at Udyogamandal, Ernakulam. In decades that followed, multistage expansion programming was undertaken bringing in the latest technology of the days, which were quickly mastered and I successfully implemented.
In 1962, FACT came under the government of India. A second fertilizers production unit called Cochin Division (CD) at Ambalamughal and two ....etc

[:=Read Full Message Here=:]

I want for my project in science on seminar on combustion


I want seminar on combustion and flame for science project ....etc

[:=Read Full Message Here=:]

ABSTRACT
Since two-three decades, hydrogen has been identified as a versatile potential fuel competent to the conventional fuel such as gasoline. In order to implement it fully and to develop the combustion based power devices which may supply much higher energy density than others, the understanding of hydrogen air combustion mechanism is very essential. In this seminars, Computational Fluid Dynamics (CFD) based numerical simulations have been performed to study the combustion of non-premixed hydrogen- ....etc

[:=Read Full Message Here=:]

Flame detectors are the most powerful equipment in fighting of fire due to their ability to detect small fire from a long distance. Fire alarm flame detector gives a signal to people to safeguard themselves against fire. Flame detector is used for the purpose of reacting to the light spectrum flames, either infrared or ultraviolet, or both. Used only in high hazard area such as fuel loading platforms, industrial process area, hyperbaric chamber, and high ceiling areas or in atmosphere where explosions or rapid fires may occu ....etc

[:=Read Full Message Here=:]