APPLICATION OF NITROUS OXIDE IN AUTOMOBILES
INRODUCTION
In modern automobiles, nitrous oxide (often just nitrous or nitro in this context) is sometimes injected into the intake manifold (or just prior to the intake manifold) to increase power: even though the gas itself is not flammable, it delivers more oxygen than atmospheric air by breaking down at elevated temperatures, thus allowing the engine to burn more fuel and air. Additionally, since nitrous oxide is stored as a liquid ....etc

[:=Read Full Message Here=:]

As the petroleum based fuels are on the verge of exhaustion, future transportation needs alternatives. The electric car comes in handy. So an attempt is made to present the basic ideas of an electric car. The relative advantages of electric cars like reliability, non dependence on petrol or diesel, less air pollution etc., and also the disadvantages like higher initial cost, less capacity etc., has also been discussed. Also simple conversion of a gasoline powered car to electric car is also discussed. With more and more new and improved models ....etc

[:=Read Full Message Here=:]

OIL PURITY CHECKING IN AUTOMOBILES

Purity in engine oil ensures proper working of engine. Degradation in purity will gradually decrease performance of vehicle and further degradation may completely damage engine.To avoid this, engine oil is changed in particular interval of kilometer.

Even in this case some times it happens to change engine oil after degrading in its quality. This situation can be avoided if we can change engine oil basins on its quality rather than kilometers travelled and arbitrary check engine oil purity indication sys ....etc

[:=Read Full Message Here=:]

Most of the microprocessors in the world are not in PCs, they are embedded in devices which control traffic for highways, airspace, railway tracks, and shipping lanes to manufacturing systems with robots.

An embedded system is any device controlled by instructions stored on a chip. These devices are usually controlled by a microprocessor that executes the instructions stored on a Read Only Memory (ROM) chip.

Embedded systems can be used to implement features ranging from the way pacemakers operate and mobile phones that can be worn as j ....etc

[:=Read Full Message Here=:]

As automobiles become increasingly user-independent and €Ëintelligent,€„¢ the demand for embedded electronic devices for use in cars is steadily increasing. This was indicated by increased demand for printed card buses (PCBs) that were destined for use as embedded devices in automobiles. PCB production rose in several parts of Europe, and experts in the industry are predicting moderate growth worldwide in the near future.

Embedded systems, because of their small size, low power consumption an ....etc

[:=Read Full Message Here=:]

ABSTRACT

This seminar paper is based upon the project work being carried out by the collaboration of Delphi-Delco Electronics (DDE) and General Motors Corporation. It was named the Automotive Collision Avoidance Systems (ACAS) field operation program to build the tomorrowâ„¢s car. It used latest technologies of radar sensing to prevent collision. Video imaging to track its path, and uses DGPS for locating the position of the vehicle on the road. It completely utilized the latest technologies in Robotics as obs ....etc

[:=Read Full Message Here=:]

As the petroleum based fuels are on the verge of exhaustion, future transportation needs alternatives. The electric car comes in handy. So an attempt is made to present the basic ideas of an electric car. The relative advantages of electric cars like reliability, non dependence on petrol or diesel, less air pollution etc., and also the disadvantages like higher initial cost, less capacity etc., has also been discussed. Also simple conversion of a gasoline powered car to electric car is also discussed. With more and more new and improved models ....etc

[:=Read Full Message Here=:]

POWER ASSISTED GEAR SHIFTING MECHANISM FOR AUTOMOBILES
ABSTRACT
This paper is based on the project Power Assisted Gear Shifting Mechanism for Automobiles. This is a design, fabrication and implementation project. The project provides solution for gear shifting for the cars. The passenger cars that now ply on the road have transmission either of manual or automatic type of gear changing. The manual type of transmission is preferred for the perfect performance without a loss in power but a compromise for comfort ness. In th ....etc

[:=Read Full Message Here=:]

ABSTRACT

Most of the microprocessors in the world are not in pcs, they are embedded in devices which control traffic for highways, airspace, railway tracks, and shipping lanes to manufacturing systems with robots. An embedded system is any device controlled by instructions stored on a chip. These devices are usually controlled by a microprocessor that executes the instructions stored on a read only memory (ROM) chip. This the topic of my seminars. Embedded systems can be used to implement features ranging f ....etc

[:=Read Full Message Here=:]

Most of the microprocessors in the world are not in PCs, they are embedded in devices which control traffic for highways, airspace, railway tracks, and shipping lanes to manufacturing systems with robots. An embedded system is any device controlled by instructions stored on a chip. These devices are usually controlled by a microprocessor that executes the instructions stored on a Read Only Memory (ROM) chip. This is the topic of my seminars. Embedded systems can be used to implement features ranging from the way pacemakers operate and mobile ph ....etc

[:=Read Full Message Here=:]