A mathematical model to choose effective cutting parameters in electroerosion, EDM



introduction

Machining by electroerosion experienced a significant development during the last decades when several problems were caused following the metallographic and mechanical change of the machined surface. Several research tasks are interested in the study of optimization and the improvement of the various performances of machining by electroerosion in order to improve the productivity ....etc

[:=Read Full Message Here=:]

The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic discharge

ADVANTAGES

1. The pr ....etc

[:=Read Full Message Here=:]

I NEED THIS

I REALLY NEED THIS.TO GIVE A REPOET ON THE ELECTRICAL DISCHARGE MACHINING
PLEASE HELP ME
....etc

[:=Read Full Message Here=:]

presented by:
A.Thillaivanan
P.Asokan
R.Saravanan
K.N.Srinivasan


CUTTING PARAMETERS OPTIMIZATION FOR THE WIRE EDM PROCESS USING CONTINUOUS ANTS COLONY ALGORITHM (CACO)
ABSTRACT:
Optimization of operating parameters is an important step in machining, particularly for operating unconventional machining procedure like Wire EDM .The economy of machining mainly depends on the machining parameters. Optimization of machining parameters is an important step and has been dealt by many researchers. In this paper ....etc

[:=Read Full Message Here=:]

Finite-Element Simulation of Electrical Discharge Machining (EDM) Process


I. INTRODUCTION
Electric discharge machining (EDM), sometimes
colloquially also referred to as spark machining, spark
eroding, burning, die sinking or wire erosion, is a
manufacturing process whereby a desired shape is obtained
using electrical discharges (sparks). Material is removed
from the workpiece by a series of rapidly recurring current
discharges between two electrodes, se ....etc

[:=Read Full Message Here=:]

Presented by
Deekshith.N.G


ELECTROCHEMICAL DISCHARGE MACHINING
ECMEDMECDM
PRINCIPLE OF WORKING
ECM-Anodic dissolution of work
EDM-Spark errosion
ECDM-Anodic dissolution&Spark errosion
Electro chemical reaction
Passivating film
Spark errosion
EQUIPMENT
LAB ARRANGEMENT
ZZZZZZZZZZZZZ
EQUIPMENT
Voltage-40-200V,DC
Current-3-4A
Electrolyte-semi dielectric fluids
Electrode gap-.01-1micro meters
3D tool feeder
WORKING
Anodic dissolution
Passivating film formation
Spark er ....etc

[:=Read Full Message Here=:]

SYNOPSIS
Wire Electric Discharge Machining(WEDM) is one of the most important non-traditional machining process.Taguchi method is supplemented with various supportive techniques such as fuzzy logic, grey-relational analysis,two-phase parameter design, artificial neural network(ANN) and various combination methods to incorporate material removal rate(MRR) and surface roughness(SR)simultaneously .Particle Swarm Optimization(PSO)& Memetic Algorithm(MA) based optimization procedures have been developed to o ....etc

[:=Read Full Message Here=:]

electonic discharge machining with full ppt and report... ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining


The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic dis ....etc

[:=Read Full Message Here=:]

ELECTRICAL DISCHARGE MACHINING
DIAGRM OF EDM
WORKING PRINCIPLE OF EDM
 In electrical discharge machining , metal is removed by producing powerful electrical spark discharge between the tool (cathode) and the work material 9anode). It is also known as spark erosion machining or electro-erosion machining….
CONSTRUCTION AND WORKING OF EDM
 Construction:
 The main components are the electrical power supply ,dielectric medium , work piece , tool and a servo control mech ....etc

[:=Read Full Message Here=:]