hy, it's pleasir to see some page link like this, well i need the book of finite element analysis using ansys 11.0 ....etc

[:=Read Full Message Here=:]

Presented By
P.BRAHMESHWAR RAO
G.SURYA MOHAN REDDY
M.HEMANTH
K.V.ANURAG REDDY


FINITE ELEMENT ANALYSIS OF A GEAR TOOTH USING ANSYS AND STRESS REDUCTION BY STRESS RELIEF HOLE
ABSTRACT
 The main aim of this project is to model a spur gear by PRO-E. The model is then imported to ANSYS
 To reduce the stress in a gear tooth, with the help of a stress relief hole, to the minimum value, without affe ....etc

[:=Read Full Message Here=:]

FINITE ELEMENT ANALYSIS ON ANGLE PLATE
ABSTRACT
The finite element method (FEM) (sometimes referred to as finite element analysis) is a numerical technique for finding approximate solutions of partial differential equations (PDE) as well as of integral equations. The topic of the seminar includes the study of Finite Element Analysis and a case study of finite element analysis.
A double angled web connection is modeled and analyzed to predict the behavior of the angle plate using finite element analysi ....etc

[:=Read Full Message Here=:]

An element management system (EMS) manages one or more of a specific type of telecommunications network element (NE). Typically, the EMS manages the functions and capabilities within each NE but does not manage the traffic between different NEs in the network. To support management of the traffic between itself and other NEs, the EMS communicates upward to higher-level network management systems (NMS) as described in the telecommunications management network (TMN) layered model.

The EMS provides the foundation to implement TMN-layered opera ....etc

[:=Read Full Message Here=:]

SAFETY CRITICAL ELEMENT IDENTIFICATION
PERFORMANCE STANDARD AND ENGINEERING
VERIFICATION FOR OIL AND GAS INSTALLATION
FESTIN TOMY
ENGINEER - SAFETY DESIGN
PETROFAC INTERNATIONAL LTD.
SHARJAH, UAE
[email protected]
Introduction
The overall objective of the Engineering
Verification for oil and gas installations is to
ensure independent and competent scrutiny of
those parts of the installation that is critical to
safety, and to obtain assurance of the
satisfactory condition of such items.
Identification of the Safety Criti ....etc

[:=Read Full Message Here=:]

please do send me the seminar paper on Finite element analysis of robotic arm for optimal work space determination...
please do send me the seminar paper on finite element analysis of robotic arm for optimal work space determinaiton ....etc

[:=Read Full Message Here=:]

Please send me the details about this seminar and also send ppt file for this. ....etc

[:=Read Full Message Here=:]

CHAPTER-1
STRESS TENSOR

INTRODUCTION:
Two planes from infinitesimal distance away and parallel to each other were made to pass through the body, an elementary slice would be isolated. Then, if an additional two pairs of planes were passed normal to the first pair, a cube of infinitesimal dimensions would be isolated from the body. Such a cube is as shown in the Fig.1.1 (a). On the near faces of the cube, i.e., on the faces away from the origin, the directions of stres ....etc

[:=Read Full Message Here=:]

An element management system (EMS) manages one or more of a specific type of telecommunications network element (NE). Typically, the EMS manages the functions and capabilities within each NE but does not manage the traffic between different NEs in the network. To support management of the traffic between itself and other NEs, the EMS communicates upward to higher-level network management systems (NMS) as described in the telecommunications management network (TMN) layered model.

The EMS provides the foundation to implement TMN-layered opera ....etc

[:=Read Full Message Here=:]

Finite-Element Simulation of Electrical Discharge Machining (EDM) Process


I. INTRODUCTION
Electric discharge machining (EDM), sometimes
colloquially also referred to as spark machining, spark
eroding, burning, die sinking or wire erosion, is a
manufacturing process whereby a desired shape is obtained
using electrical discharges (sparks). Material is removed
from the workpiece by a series of rapidly recurring current
discharges between two electrodes, se ....etc

[:=Read Full Message Here=:]