Presented by
Deekshith.N.G


ELECTROCHEMICAL DISCHARGE MACHINING
ECMEDMECDM
PRINCIPLE OF WORKING
ECM-Anodic dissolution of work
EDM-Spark errosion
ECDM-Anodic dissolution&Spark errosion
Electro chemical reaction
Passivating film
Spark errosion
EQUIPMENT
LAB ARRANGEMENT
ZZZZZZZZZZZZZ
EQUIPMENT
Voltage-40-200V,DC
Current-3-4A
Electrolyte-semi dielectric fluids
Electrode gap-.01-1micro meters
3D tool feeder
WORKING
Anodic dissolution
Passivating film formation
Spark er ....etc

[:=Read Full Message Here=:]

Finite-Element Simulation of Electrical Discharge Machining (EDM) Process


I. INTRODUCTION
Electric discharge machining (EDM), sometimes
colloquially also referred to as spark machining, spark
eroding, burning, die sinking or wire erosion, is a
manufacturing process whereby a desired shape is obtained
using electrical discharges (sparks). Material is removed
from the workpiece by a series of rapidly recurring current
discharges between two electrodes, se ....etc

[:=Read Full Message Here=:]

ABSTRACT
High intensity discharge lamp (HID) presently used for urban street light are based on principle of gas discharge, thus the intensity is not controllable by any voltage reduction method as the discharge path is broken. White Light Emitting Diode (LED) based lamps are soon replacing the HID lamps in street light. Thus intensity control is now possible by pulse width modulation based on sensing the movement and density of vehicles. The pulse width becomes very narrow on sensing no movement of vehicles. As the ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining


The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic dis ....etc

[:=Read Full Message Here=:]

Submitted By
DILEEP RAJ.K


ABSTRACT
Water is most abundant component on earth surface, constituting about 70% of the planet surface. Although some 70% of the Earth's surface is covered by water much of this is saline. However freshwater is available in almost all populated areas of the earth although it may be expensive to access the water and the supply may not always be sustainable. Only 4% of the available water is suitable for drinking purpose.
Throughout most of the world, the most common contamination ....etc

[:=Read Full Message Here=:]

Ozone Generation From corona discharge

Abstract
The phenomenon of violet glow, hissing noise and the production of ozone
gas in the overhead transmission line known as corona is used in our project for the
production of ozone gas. The gas produce out of the device can be used for the
treatments of drinking water disinfections and air purification.
The device has a discharge tube in which high electric field is applied so
as to breakdown the ozone present in the air. This ph ....etc

[:=Read Full Message Here=:]

ELECTRICAL DISCHARGE MACHINING
DIAGRM OF EDM
WORKING PRINCIPLE OF EDM
 In electrical discharge machining , metal is removed by producing powerful electrical spark discharge between the tool (cathode) and the work material 9anode). It is also known as spark erosion machining or electro-erosion machining….
CONSTRUCTION AND WORKING OF EDM
 Construction:
 The main components are the electrical power supply ,dielectric medium , work piece , tool and a servo control mech ....etc

[:=Read Full Message Here=:]

The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.


CLASSIFICATION

1. Contact initiated discharge
2. Spark initiated discharge
3. Electrolytic discharge

ADVANTAGES

1. The pr ....etc

[:=Read Full Message Here=:]

electonic discharge machining with full ppt and report... ....etc

[:=Read Full Message Here=:]

I NEED THIS

I REALLY NEED THIS.TO GIVE A REPOET ON THE ELECTRICAL DISCHARGE MACHINING
PLEASE HELP ME
....etc

[:=Read Full Message Here=:]