Abstract”
A major disadvantage of applying sliding mode control to dc/dc converters is that the steady-state switching frequency is affected by line and load variations. This is undesirable as it complicates the design of the input and output filters. To reduce switching frequency deviation in the events of line and load variations, an adaptive feedforward control scheme that varies the hysteresis band according to the change of line input voltage and an adaptive feedback control scheme that varies the control parameter (i.e., sliding c ....etc

[:=Read Full Message Here=:]

Submitted By:
Shibayan Chatterjee




Introduction.
Definition.
Control theory is a combined branch of mathematics and Engineering that deals with the dynamical systems. The desired output of the system is called reference and when one or more outputs desire to follow the reference over time a controller is designed and. It helps in manipulating the input to provide the desired output.
The role of control theory can be understood with the help of a simple example. Let ....etc

[:=Read Full Message Here=:]

Presented by:
Reza Raoufi
Hamid Khaloozadeh


Abstract


A robust/adaptive stochastic observer is presented for stochastic nonlinear dynamics having excessive uncertainties. It was shown through a new theorem that the proposed nonlinear robust sliding mode observer has very accurate state estimate error characteristic. The observer uses the sliding mode technique for the robustness and a deterministic adaptive law to guarantees a globally asymptotically convergence observation error. Finally, an example is given to illustrat ....etc

[:=Read Full Message Here=:]

Name– study of Ex-OR logic using NAND gates as universal building blocks.
Aim – to study the working of Ex-OR gate using derived gates i.e. NAND gates.
Apparatus – IC 7400 and IC 7486, circuit board, power supply +5V DC, LED, connecting wires, soldering iron, cutter etc.
Circuit diagram –


Procedure –
1) Identify the given ICs.
2) Construct the circuit of Ex-OR gate using NAND gates. Use pieces of wires for connections.
3) Connect final output of the circ ....etc

[:=Read Full Message Here=:]

Name– study of RS flip-flop using NAND gates and NOR gates.
Aim – to study the working of RS flip-flop using NAND gates and NOR gates and compare them.
Apparatus – IC 7400, IC 7402, circuit board, power supply +5V DC, LEDs, connecting wires, soldering iron, cutter etc.
Circuit diagrams


Procedure –
1) You are given IC 7400 and IC 7402. Identify the ICs by reading their numbers and details from above given pin configurations.
2) Connect the gates with their ....etc

[:=Read Full Message Here=:]

whole project report for simulation of sliding window protocol in java.
kindly mail me at [email protected] ....etc

[:=Read Full Message Here=:]

Name– study of universal building blocks – NAND gate and NOR gate.
Aim – to study the construction of basic gates using NAND gates and NOR gates.
Apparatus – IC 7400, IC 7402, circuit board, power supply +5V DC, LED, connecting wires, soldering iron, cutter etc.
Circuit diagrams



Procedure –
1) You are given IC 7400 and IC 7402. Identify the ICs by reading their numbers and details from above given pin configurations.
2) Connect the gates wi ....etc

[:=Read Full Message Here=:]

Abstract

Magnetic servo levitation (MSL) is currently being investigated as an alternative to drive fast-tool servo systems that could overcome the range limitations inherent to piezoelectric driven devices while operating over a wide bandwidth. To control such systems, a feedback-linearized controller coupled with a Kalman filter has been previously described. Performance limitations that degrade tracking accuracy suggest the use of a more robust controller design approach, such as sliding-mode control. Current literature on slidi ....etc

[:=Read Full Message Here=:]

REENTRY TERMINAL GUIDANCE THROUGH SLIDING MODE CONTROL
SEMINAR REPORT
submitted in partial fulfillment of
the requirements for the award of M.Tech Degree in
Electrical and Electronics Engineering (Guidance and Navigation Control)
of the University of Kerala
Submitted by
DEVIKA K.B.
First Semester
M.Tech, Guidance a ....etc

[:=Read Full Message Here=:]

Abstract:
The field oriented control emerged as an important approach for the control of AC machines, and continues to be explored and developed in the literature. The estimation of the rotor flux from the measurable variables was the only method used to implement the vector control of the induction machine. To replace the estimator based on the mathematical model of the system, which can lead to unintended errors due to uncertainties on the model and on the measures we use an appropriate observer.

Presented By:
Ch ....etc

[:=Read Full Message Here=:]