Abstract”
In this paper, a real-time system to create a talking head from a video
sequence without any user intervention is presented. In the proposed
system, a probabilistic approach, to decide whether or not extracted
facial features are appropriate for creating a three-dimensional (3-D)
face model, is presented. Automatically extracted two-dimensional
facial features from a video sequence are fed into the proposed
probabilistic framework before a corresponding 3-D face model is built
to avoid g ....etc

[:=Read Full Message Here=:]

INTRODUCTION
 Cryogenic treatment is methodology of ultra-low temperature processing of materials to enhance their properties to the desired levels. The precise cryogenic treatment cycle consists of three phases of descent, soak & ascend.
 Cryogenic tempering is the extreme cold to re-define the molecular structure in metals. Material subjected to deep cryogenic temperature develop a more uniform, redefined microstructure with greater density.
• Austenite, the softer molecules in the microstructure is trans ....etc

[:=Read Full Message Here=:]

In metallic alloys at room temperature, atomic diffusion is typically very sluggish, and equilibrium or metastable phases do not undergo transformations. However, during plastic deformation, significant atomic mobility is possible. In addition, deformation may lead to mixing, possibly favoring the formation of nonequilibrium phases. In this talk, two examples will be presented, in which the rate of transformation to equilibrium is enhanced by mechanical deformation. In an unstable, nanocrystalline Fe50Cu50 solid solution, ball milling leads to ....etc

[:=Read Full Message Here=:]

Realistic Skin Movement for Character Animation
Malu. G. Punnackal
S6-Computer Science Department
Mohandas College of Engineering and Technology
Trivandrum




Abstract
Skin movement modeling is a crucial element for realistic animation of both human and creature
characters. In this paper, we are primarily concerned with a special skin movement effect, skin sliding.
Although physical properties, such as skin elasticity, are usu ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Earthquake by itself, is not a disaster, it is natural phenomenon result from ground movement, sometimes violent. Disaster occurs when man made buildings and other structures cannot cope up with these ground movements and fail causing death and destruction of property.
The energy that is released after an earthquake sets up waves called primary wave and secondary waves. These further produce surface waves, which cause vibration of the ground and structures standing on top. Depending on the ....etc

[:=Read Full Message Here=:]

MONITORING CRACK GROWTH IN PRESSURE VESSELS BY ACOUSTIC EMISSION TECHNIQUE
SEMINAR REPORT
Submitted by
NAHUSHAN.Y
ENGINEERING DEPARTMENT OF MECHANICAL
COLLEGE OF ENGINEERING TRIVANDRUM
August 2010



ABSTRACT

AE-Analysis is an extremely powerful technology that can be deployed within a wide range of usable applications of non-destructive testing: metal pressure vessels, piping systems, reactors, and similar. The growing discontinuities in pressure vessels and structures under ....etc

[:=Read Full Message Here=:]

INTRODUCTION
 Cryogenic treatment is methodology of ultra-low temperature processing of materials to enhance their properties to the desired levels. The precise cryogenic treatment cycle consists of three phases of descent, soak & ascend.
 Cryogenic tempering is the extreme cold to re-define the molecular structure in metals. Material subjected to deep cryogenic temperature develop a more uniform, redefined microstructure with greater density.
• Austenite, the softer molecules in the microstructure is trans ....etc

[:=Read Full Message Here=:]

A MICROFORCE AND NANOFORCE BIOMICROSCOPE DEVICE FOR IN VITRO MECHANOTRANSDUCTION INVESTIGATION
Presented By:
Jins George
S7 AEI
College Of Engineering, Trivandrum




CONTENTS
Introduction
Motivations of this Work
Block Diagram of the FBM Device
Description of the FBM Device
Cantilever Spring Constant Calibration
In Vitro Mechanical Characterization Experiments
Conclusion
References

INTRODUCTION
Mechanotransduction
Characterization of Cell Mec ....etc

[:=Read Full Message Here=:]

plzz i want report and ppt of this topic..if u have den plz mail me on my id..
my id is : [email protected] ....etc

[:=Read Full Message Here=:]

Biomechanics
Socrates, born 2400 years ago, taught that we could not begin to understand the world around us until we understood our own nature.
As scientists who seek knowledge of the mechanics within their own bodies, and those of other living creatures, we share something of Socrates' inward inquiry.
Fortunately, we do not share the public abuse that he suffered, and which led him, as an old man of 70, to be tried, convicted, and executed for impiety and corrupting the youth of Athens.
Introduction ....etc

[:=Read Full Message Here=:]

WE NEED ALL DETAILS FOR FCD 700 A THAT IS CHEMICAL COMPOSITION, MECHANICAL PROPERTIES, HEAT TREATMENTS, ETC. PRTICULER FOR THE PRODUCTION OF CAMSHAFTS ....etc

[:=Read Full Message Here=:]

Stable tearing crack growth (slow ductile growth of a macroscopic crack in a load-bearing structure) is an important fracture failure process in ductile materials (e.g. metals) and usually precedes the final catastrophic failure of a structure. In recent years, there has been a growing demand for a simulation-based structural design and evaluation methodology that takes into account the stable tearing crack growth process. Within such a methodology, two tools must be available: (1) an efficient computer simulation code that can handle the kinem ....etc

[:=Read Full Message Here=:]

Ductile Mixed-mode Fracture Criterion Development and Crack Growth Simulations




Stable tearing crack growth (slow ductile growth of a macroscopic crack in a load-bearing structure) is an important fracture failure process in ductile materials (e.g. metals) and usually precedes the final catastrophic failure of a structure. In recent years, there has been a growing demand for a simulation-based structural design and evaluation methodology that takes into account the stable tearing crack growth process. Within such a methodology, two too ....etc

[:=Read Full Message Here=:]

Studies on Aluminum-Fly-Ash Composite Produced by Impeller Mixing

A THESIS SUBMITTED IN PARTIAL FULFILLMENT OF THE REQUIREMENTS FOR THE DEGREE OF
Master of Technology
In Metallurgical & Materials Engineering
Submitted By
Shuvendu Tripathy Roll No.207MM103
Under the guidance of Prof.S.Sarkar
Department of National Metallurgical & Materials Institute of Technology Rourkela 2009
National Institute of Technology Rourkela


ABSTRACT
Metal matrix composites (MMCs) constitute an important class of design and w ....etc

[:=Read Full Message Here=:]

DUCTILITY DESIGN OF REINFORCED CONCRETE APARTMENT BUILDING


ABSTRACT
Among the three basic need of human being shelter is one of the important features. The study of project deals with the effect of earthquake on the structures and their environment & also the method of reducing its effort.
A number of naturally occurring disasters as earthquake are capable of causing death injuries & damage of properties. These natural hazards causes tremendous the losses ....etc

[:=Read Full Message Here=:]

1. The term forging refers to :
(A)Plastic deformation
(B)Plastic deformation
(C )Stress deformation
(D)Strain reveling

2.A very difficult forgable material is :
(A)Maraging Steel
(B)Beryllium
(C )Magnesium alloy
(D)Nickel alloy

3.The highly elastic material is :
(A)Rubber
(B)Brass
(C )Glass
(D)Steel

4.Slow and progressive deformation is called :
(A)Resilience
(B)Malleability
(C )Creep
(D)Plasticity

5.When a material is subjected to cyclic periodic loading, the property' occurring is :
(A)Creep
....etc

[:=Read Full Message Here=:]