There is a need to remove heat from compact spaces (on the order of inches on a side) in a variety of cooling applications.  Some examples include power electronics, transformers, base stations in cellular communications, automotive electronics, portable and wearable electronics, electric vehicle batteries, power distribution systems in computers, military electronics and avionics, and food processing.  In most cases, the use of sophisticated cooling techniques (externally simple, yet highly en ....etc

[:=Read Full Message Here=:]

Carbon Fiber Reinforced Polymer (CFRP) is a Polymer Matrix Composite material reinforced by carbon fibers.
The reinforcing dispersed phase may be in form of either continuous or discontinuous carbon fibers of diameter about 0.0004 (10 mkm) commonly woven into a cloth. Similar to fiberglass (glass reinforced polymer), the composite material is commonly referred to by the name of its reinforcing fibers (carbon fiber). The polymer is most often epoxy, but other polymers, such as polyester, vinyl ester or nylon,
Carbon fiber ....etc

[:=Read Full Message Here=:]

Reinforced concrete structures often have to face modification and improvement of their performance during their service life. The main contributing factors are change in their use of ,new design standards, deterioration due to corrosion in the steel caused by exposure to an aggressive environment and accident events such as earthquakes .In such circumstances there are two possible solutions: replacement or retrofitting.
Retrofitting of flexural concrete elements are traditionally accomplished by externally bonding steel plates to concrete whi ....etc

[:=Read Full Message Here=:]

Fiber Reinforced Concrete can be defined as a composite material consisting of mixtures of cement, mortar or concrete and discontinuous, discrete, uniformly dispersed suitable fibers. Continuous meshes, woven fabrics and long wires or rods are not considered to be discrete fibers.
Fiber is a small piece of reinforcing material possessing certain characteristics properties. They can be circular or flat. The fiber is often described by a convenient parameter called aspect ratio. The aspect ratio of the fiber is the ratio of its length to its di ....etc

[:=Read Full Message Here=:]

Abstract
My Project “DESIGN ANALYSIS AND FABRICATION OF RADIATOR
” mainly focuses on the thermal design and analysis of radiator as
heat exchanger only. We have developed this work as our semester project with a view to get
familiar with the technologies as well as application of theories into practical work done by
industries. My project contains the design and material selection of the radiator for different
type of vehicles also. For better efficiency, improvement of heat transf ....etc

[:=Read Full Message Here=:]

i am a student.i want an abstract for carbon fiber reinforced polymer and full seminar report(including introduction,properties of carbon fiber reinforced polymer including electrical properties of carbon fiber reinfoced polymer and conclusion). ....etc

[:=Read Full Message Here=:]

ARE NATURAL FIBER COMPOSITES ENVIRONMENTALLY SUPERIOR TO GLASS FIBER REINFORCED COMPOSITES?
INTRODUCTION:-
• Natural fibers have been used to reinforce materials for
over 3,000 years.
• Many types of natural fibers have been investigated for
use in plastics .including , Flax, hemp, jute, straw,
wood fiber, rice husks,wheat,barley,oats .
• Natural fibers have the advantage that they are
renewable resources and have marketing appeal.
• Natural fibers are increasingly used in automotive a ....etc

[:=Read Full Message Here=:]

Development of the Carbon Fiber Reinforced Carbon-carbon Composite for High Temperature Gas-cooled Reactors
In the present paper. details of the development of the candidate CIC composite are described. In the material development, especially, feasibility of the production. stableness of the supply and cost are much taken into consideration. As the physical properties of the material, high mechanical strength such as tensile and bending, high fracture strain and fracture toughness and low dimensional change by neutron ....etc

[:=Read Full Message Here=:]

I m Surya doing my final year in civil engineering. I have chosen to work on fiber reinforced Geo polymer concrete for my final year BE project. I would like to know the tests to be performed to assess the properties , instruments required and feasibility of the project. I'd be much obliged if someone could help me.

M.Surya ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]