What is a Fiber…?
Small piece of reinforcing material
possessing certain characteristic
properties.
Can be circular or flat.
Parameter used to describe fiber –
“Aspect ratio”.
Aspect ratio is ratio of its length to its
diameter.
Typical aspect ratio for fibers ranges from
30 to 150.
Concrete (FRC)?
Fiber reinforced concrete (FRC) is concrete
containing fibrous material which increases its
structural integrity.
It contains short discrete fibers that are uniformly
dist ....etc

[:=Read Full Message Here=:]

Carbon Fiber Reinforced Polymer (CFRP) is a Polymer Matrix Composite material reinforced by carbon fibers.
The reinforcing dispersed phase may be in form of either continuous or discontinuous carbon fibers of diameter about 0.0004 (10 mkm) commonly woven into a cloth. Similar to fiberglass (glass reinforced polymer), the composite material is commonly referred to by the name of its reinforcing fibers (carbon fiber). The polymer is most often epoxy, but other polymers, such as polyester, vinyl ester or nylon,
Carbon fiber ....etc

[:=Read Full Message Here=:]

Development of the Carbon Fiber Reinforced Carbon-carbon Composite for High Temperature Gas-cooled Reactors
In the present paper. details of the development of the candidate CIC composite are described. In the material development, especially, feasibility of the production. stableness of the supply and cost are much taken into consideration. As the physical properties of the material, high mechanical strength such as tensile and bending, high fracture strain and fracture toughness and low dimensional change by neutron ....etc

[:=Read Full Message Here=:]

ARE NATURAL FIBER COMPOSITES ENVIRONMENTALLY SUPERIOR TO GLASS FIBER REINFORCED COMPOSITES?
INTRODUCTION:-
• Natural fibers have been used to reinforce materials for
over 3,000 years.
• Many types of natural fibers have been investigated for
use in plastics .including , Flax, hemp, jute, straw,
wood fiber, rice husks,wheat,barley,oats .
• Natural fibers have the advantage that they are
renewable resources and have marketing appeal.
• Natural fibers are increasingly used in automotive a ....etc

[:=Read Full Message Here=:]

I m Surya doing my final year in civil engineering. I have chosen to work on fiber reinforced Geo polymer concrete for my final year BE project. I would like to know the tests to be performed to assess the properties , instruments required and feasibility of the project. I'd be much obliged if someone could help me.

M.Surya ....etc

[:=Read Full Message Here=:]

i am a student.i want an abstract for carbon fiber reinforced polymer and full seminar report(including introduction,properties of carbon fiber reinforced polymer including electrical properties of carbon fiber reinfoced polymer and conclusion). ....etc

[:=Read Full Message Here=:]

i would like to konw about frc creck measurement ....etc

[:=Read Full Message Here=:]

Fiber Reinforced Concrete can be defined as a composite material consisting of mixtures of cement, mortar or concrete and discontinuous, discrete, uniformly dispersed suitable fibers. Continuous meshes, woven fabrics and long wires or rods are not considered to be discrete fibers.
Fiber is a small piece of reinforcing material possessing certain characteristics properties. They can be circular or flat. The fiber is often described by a convenient parameter called aspect ratio. The aspect ratio of the fiber is the ratio of its length to its di ....etc

[:=Read Full Message Here=:]

Fiber Reinforced Concrete
“FRC is defined as a composite material consisting of concrete reinforced with discrete randomly but uniformly dispersed short length fibers.”
Fibers are generally discontinuous, randomly distributed through out the cement matrices.
Enhances flexural and tensile strength of the concrete.
Fibers may generally be classified into two: organic and inorganic.
Contd. ….
Volume fraction – measure of fiber in concrete.
Typically ranges from 0.1 to 3%.
Aspect ratio - fiber length (l) ....etc

[:=Read Full Message Here=:]

I m Surya doing my final year in civil engineering. I have chosen to work on fiber reinforced Geo polymer concrete for my final year BE project. I would like to know the tests to be performed to assess the properties , instruments required and feasibility of the project. I'd be much obliged if someone could help me.

M.Surya ....etc

[:=Read Full Message Here=:]