Title: Renewable Energy Technology Management Promoting Village Energy Security & Sustainable Development -- A case study of village Radhapur.
Trainee name: Indranil Ghosh, M. Tech Energy & Environment Management, Kurukshetra University
Organization: Society for Development Alternatives, New Delhi
Guide: Mr. Manoj Mahata, Program Manager, Energy Systems,
Development Alternatives
Faculty guide: Prof. Smita Choudhry, Institute of Environmental Studies, Kurukshetra University
The objective of the study is substantial analysis of the ....etc

[:=Read Full Message Here=:]

Abstract

In paper the fundamental question about optimal interaction between the controlling stimuli generated by the active (powered) and the passive (unpowered) drives of the robotic systems have been studied. A mathematical statement of the problem has been proposed that is suitable to study this question for the semi-passively actuated n-degree-of-freedom robotic systems. The problem is formulated as an optimal control problem for n-degree-of-freedom mechanical system models a semi-passively actuated robot. We take into account the inter ....etc

[:=Read Full Message Here=:]

P V Ramaiah J. and G Krishnaiah2
I Department of Mechanical Engineering, Srikalahasteeswara Institute of Technology, Andhra Pradesh, India 2Department of Mechanical Engineering, SV University College of Engineering, Andhra Pradesh, India
The manuscript was received on 15 June 2006 and was accepted after revision for publication on 30 May 2007. DOl: 1O.1243/09544062JMES411


abstract

The paper deals with modelling and design of a friction damper. This has been done in four phases. In the first p ....etc

[:=Read Full Message Here=:]

MAGNETORHEOLOGICAL FLUID DAMPER
1.INTRODUCTION
Vibration isolators or dampers are commonly used to mitigate vibrations in structures or machines. The isolators are typically passive and they are designed to reduce the vibration of the most undesired frequency. However, in many applications, the excitation frequency varies across a large range. In a semi-active device, the stiffness or damping can be adjusted during operation. Changing the stiffness of the support device can be exploited by moving the eigenfrequency o ....etc

[:=Read Full Message Here=:]

IMPACT VIBRATION CONTROL USING SEMI-ACTIVE DAMPER
Introduction
 Dynamic vibration absorbers are used for suppressing the steady state vibration of a machine.
 It consists of spring-mass-damper system.
 For an impact force, it can damp only the residual part of impact vibration
 But maximum amplitude of the vibration is almost remain same that of undamped vibration
DYNAMIC VIBRATION ABSORBER
RESPONSE Of An IMPULSE
FREE BODY DIAGRAM
EQUATION OF MOTION
 Control force of dynamic damper can ....etc

[:=Read Full Message Here=:]

please send me slides for this topic ....etc

[:=Read Full Message Here=:]

Abstract
Aiming low power dissipation during testing, in this paper we present a methodology for deriving
a novel BIST scheme for Modified Booth Multipliers. Reduction of the power dissipation is
achieved by: (a) introducing a suitable Test Pattern Generator (TPG) built of a 4-bit binary and
a 4-bit Gray counter, (b) properly assigning the TPG outputs to the multiplier inputs and (c)
significantly reducing the test set length. The achieved reduction of the total power dissipation is
from 44.1% to 54.9%, the average reduction per t ....etc

[:=Read Full Message Here=:]

mechanical energy into electrical energy

INTRODUCTION
In this model we show that how we can generate a voltage from the busy traffic. Conversion of the mechanical energy into electrical energy is widely used concept. It’s a mechanism to generate power by converting the potential energy generated by a vehicle going up on a speed breaker into rotational energy. We have used that simple concept to the project. We connect one mechanical rod with the dynamo and fit this rod on the surface of the ....etc

[:=Read Full Message Here=:]

Author: Dr. Taryn Bayles

Abstract

Here, students learn how harvesting energy from renewable sources will help meet the future needs of society. In the laboratory, the students will develop a system to store energy from a renewable source (represented in the laboratory by a light bulb, a box fan, or flowing water). The students will transport the energy, and use it to supply an electrical load (a light bulb) in a different physical location. In the process, students will learn about energy and power, and will learn about
anal ....etc

[:=Read Full Message Here=:]

i am final year project college student who need help on the topic active dampers in automobile and i am expected to give a detailed report which will include supporting equations, general analysis and its application and importance in cars. ....etc

[:=Read Full Message Here=:]