i am final year project college student who need help on the topic active dampers in automobile and i am expected to give a detailed report which will include supporting equations, general analysis and its application and importance in cars. ....etc

[:=Read Full Message Here=:]

I am anusha i want to know about this project overview and ideas
about Information Content-Based Sensor Selection and Transmission Power Adjustment for Collaborative Target Tracking

....etc

[:=Read Full Message Here=:]

ABSTRACT
This dissertation proposes simple and efficient control algorithms for seismically excited structures using MR dampers and a smart passive system based on MR dampers. Magnetorheological (MR) dampers are one of the most promising control devices for civil engineering applications to earthquake hazard mitigation, because they have many advantages such as small power requirement, reliability, and low price to manufacture. A number of control algorithms have been adopted for semi active systems including the M ....etc

[:=Read Full Message Here=:]

Abstract:
A modified friction damper is presented to enhance the performance of conventional friction damper and semi-active variable friction damper. An additional plate is provided between the two sliding plates of a conventional friction damper which results in an additional sliding interface with the same normal (clamping) force. Similar modification is also made to semi-active variable friction damper (SAVFD) to enhance its performance. The enhancement in the performance of the benchmark building is studied under across wind load ....etc

[:=Read Full Message Here=:]

i am anusha overview of the project Information Content-Based Sensor Selection and Transmission Power Adjustment for Collaborative target tracking.

....etc

[:=Read Full Message Here=:]

ABSTRACT
Magneto rheological fluids commonly known as MR fluids are suspensions of solid in liquid whose properties changes drastically when exposed to magnetic field. Magnetorheological (MR) fluids are materials that respond to an applied field with a dramatic change in their rheological behavior. The essential characteristic of these fluids is their ability to reversibly change from a free-flowing, linear, viscous liquid to a semi-solid with controllable yield strength in milliseconds when exposed to a magnetic field. ....etc

[:=Read Full Message Here=:]

A PAPER PRESENTATION ON HIDING DATA IN IMAGES BY SIMPLE LSB SUBSTITUTION

Hiding data in images by simple LSB substitution
Abstract
In this paper, a data-hiding scheme by simple LSB substitution is
proposed. By applying an optimal pixel adjustment process to the stego
-image obtained by the simple LSB substitution method, the image
quality of the stego-image can be greatly improved with low extra
computational complexity. The worst case mean-square-error between the
stego-image and the cover-image is deri ....etc

[:=Read Full Message Here=:]

IMPACT VIBRATION CONTROL USING SEMI-ACTIVE DAMPER
Introduction
 Dynamic vibration absorbers are used for suppressing the steady state vibration of a machine.
 It consists of spring-mass-damper system.
 For an impact force, it can damp only the residual part of impact vibration
 But maximum amplitude of the vibration is almost remain same that of undamped vibration
DYNAMIC VIBRATION ABSORBER
RESPONSE Of An IMPULSE
FREE BODY DIAGRAM
EQUATION OF MOTION
 Control force of dynamic damper can ....etc

[:=Read Full Message Here=:]

During the running process of eccentric powder machine, the fineness of the final products is a very important parameter. However, due to some reasons, the product fineness cannot satisfy the requirements of the customers,belt conveyor for sale for sand and gravel so that it is necessary to adjust the product fineness which can be realized from the following two aspects:

1. Adjust the cycle air quantity of the powder machine

The adjustment of the cycle air quantity relies on the amount of the big and small air blade. When the final p ....etc

[:=Read Full Message Here=:]

P V Ramaiah J. and G Krishnaiah2
I Department of Mechanical Engineering, Srikalahasteeswara Institute of Technology, Andhra Pradesh, India 2Department of Mechanical Engineering, SV University College of Engineering, Andhra Pradesh, India
The manuscript was received on 15 June 2006 and was accepted after revision for publication on 30 May 2007. DOl: 1O.1243/09544062JMES411


abstract

The paper deals with modelling and design of a friction damper. This has been done in four phases. In the first p ....etc

[:=Read Full Message Here=:]

i am anusha i want to know more about the project Information Content-Based Sensor Selection and Transmission Power Adjustment for Collaborative Target Tracking about MISS and ICTP
algorithms which are used in this project ....etc

[:=Read Full Message Here=:]

Abstract

In paper the fundamental question about optimal interaction between the controlling stimuli generated by the active (powered) and the passive (unpowered) drives of the robotic systems have been studied. A mathematical statement of the problem has been proposed that is suitable to study this question for the semi-passively actuated n-degree-of-freedom robotic systems. The problem is formulated as an optimal control problem for n-degree-of-freedom mechanical system models a semi-passively actuated robot. We take into account the inter ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Earthquake by itself, is not a disaster, it is natural phenomenon result from ground movement, sometimes violent. Disaster occurs when man made buildings and other structures cannot cope up with these ground movements and fail causing death and destruction of property.
The energy that is released after an earthquake sets up waves called primary wave and secondary waves. These further produce surface waves, which cause vibration of the ground and structures standing on top. Depending on the ....etc

[:=Read Full Message Here=:]

The dual mass flywheel, or DMF, eliminates excessive transmission gear rattle, reduces gear change/shift effort, and increases fuel economy. There are two basic types of Dual Mass Flywheels. The first is made up of a primary and secondary flywheel with a series of torsion springs and cushions. There is a friction ring located between the inner and outer flywheel that allows the inner and outer flywheel to slip. This feature is designed to alleviate any damage to the transmission when torque loads exceed the vehicle rating of the transmission. T ....etc

[:=Read Full Message Here=:]

BOSE ELECTROMAGNETIC SUSPENSION
Abstract:
Now a dayâ„¢s comfort and control are two major aspects in field of design and manufacturing. At present condition spring and damper system are used as shock absorber in automobiles. As concerned to comport and control their system are lagging to provide optimum level of performance. With view of increase the comfort and control electromagnetic suspension system introduced to fulfill the requirement of modern days. This seminar intended to explain the resurgence of interest ....etc

[:=Read Full Message Here=:]

MAGNETORHEOLOGICAL FLUID DAMPER
1.INTRODUCTION
Vibration isolators or dampers are commonly used to mitigate vibrations in structures or machines. The isolators are typically passive and they are designed to reduce the vibration of the most undesired frequency. However, in many applications, the excitation frequency varies across a large range. In a semi-active device, the stiffness or damping can be adjusted during operation. Changing the stiffness of the support device can be exploited by moving the eigenfrequency o ....etc

[:=Read Full Message Here=:]

SYNOPSIS
In the present scenario of automobile industry manufacturers are trying to produce comfortable and safe vehicles which the consumers are looking for. A shock absorber is a damping element of the vehicle suspension, and its performance directly affects the comfortability, dynamic load of the wheel and dynamic stroke of the suspension. The conventional type of shock absorbers has got the main drawback that it causes foaming of the fluid at high speeds of operation. This results in a decrease of t ....etc

[:=Read Full Message Here=:]

The author is from CET, Trivandrum

ABSTRACT

Traditionally, input shaping has been used outside the feedback control loop. Utilizing input shaping in this way prevents it from directly addressing some important vibration control issues such as disturbances, nonzero initial conditions, actuator saturation, etc., These potential applications, however, will never be fully exploited unless a good understanding exists of how to create stable CLSS controllers.

Study of closed-loop stability of feedback loops containing input shapers by ana ....etc

[:=Read Full Message Here=:]

MAGNETORHEOLOGICAL FLUID DAMPER
1.INTRODUCTION
Vibration isolators or dampers are commonly used to mitigate vibrations in structures or machines. The isolators are typically passive and they are designed to reduce the vibration of the most undesired frequency. However, in many applications, the excitation frequency varies across a large range. In a semi-active device, the stiffness or damping can be adjusted during operation. Changing the stiffness of the support device can be exploited by moving the eigenfrequency o ....etc

[:=Read Full Message Here=:]