PRODUCTIVITY IMPROVEMENT ON COPY TURNING MACHINE, THROUGH CYCLE TIME REDUCTION
OUR ACHIEVEMENTS
We reduced the cycle time required for a valve on
CT machine from 24 seconds to 22 seconds.
The reduction of 2 seconds in the cycle time has
resulted in following changes.
Monthly turnover increased by Rs 5,62,500.
Yearly turnover increased by Rs 67,50,000.
AIM OF THE PROJECT
To increase the valve production from 950 to 1050 valves per shift on Copy turning machine by reducing the cycle time require ....etc

[:=Read Full Message Here=:]

1.trees produce each year are______________________.
(A)Annual rings(B)Cup rings(C )Cambium (D)layer

2.Mortise gauge has__ ____ __ scribing pins.
(A)One (B)Three (C )hour (D)Two

3.Which instrument is used to testing trueness of large surfaces ?
(A)Steel rule
(B)Try square
(C )Straightedge
(D)Gauge

4.Which one of the following is not a boring tool ?
(A)Bradawl
(B)Gimlet
(C )Auger
(D)C-cramp

5.The blade of a saw is made of:
(A) Cast iron
(B) Spring steel
(C ) Mild steel
(D) High Carbon steel

6.Whi ....etc

[:=Read Full Message Here=:]

Time : 1 hour and 15 minutes
Category:005/2016


1. Kirchhoffs Voltage Law (KVL) is a restatement of:
(A) Principle of conservation of charge (B) Principle of conservation of energy
(C ) Both (A) and (B) (D) None of the above

2. If the number of turns of a coil is doubled, its inductance :
(A) Decreases two times (B) Decreases four times
(C ) Increases two times (D) Increases four times

3. Two batteries having emfs of 10 V and 7 V and internal resistances 2 Ω and 3 Ω
respectively are connected in parallel ....etc

[:=Read Full Message Here=:]

16.Case hardening is done on
A)Cast Iron C) High Speed Steel
B) High Carbon Steel D) Mild Steel

17.Which gear is used for power transmission in parallel shafts ?
A)Worm gear   B) Rack and pinion
C) Helical gear D) Bevel gear


C)Pour point

18.Main property of cutting fluid
A)Specific gravity C) Ductility
B)Specific heat D) Viscosity

19.What SAE 30 number indicate ?
A)Flash point 
B) Viscosity
C) Pour point
D) Fire point

20.A tool which is used to enlarge a previously drilled hole is 

known as
....etc

[:=Read Full Message Here=:]

CAPTCHA Security: A Low-Cost Attack on a Microsoft CAPTCHA
SEMINAR REPORT
Submitted by
NARAYANAN V
DEPARTMENT OF COMPUTER SCIENCE & ENGINEERING
COLLEGE OF ENGINEERING TRIVANDRUM
2010






ABSTRACT

CAPTCHA is now almost a standard security technology. The most widely used CAPTCHAs rely on the sophisticated distortion of text images rendering them unrecognizable to the state of the art of pattern recognition techniques, and these text-based schemes have found widespr ....etc

[:=Read Full Message Here=:]

Hi am Mohamed i would like to get details on rk rajput manufacturing technology 2 pdf ..My friend Justin said rk rajput manufacturing technology 2 pdf will be available here and now i am living at ......... and i last studied in the college/school ......... and now am doing ....i need help on ....etc

[:=Read Full Message Here=:]

Seminar Report On
FUNCTIONAL PROGRAMMING IN HASKELL

ABSTRACT
As software becomes more and more complex, it is more and more important to structure it well. Well-structured software is easy to write, easy to debug, and provides a collection of modules that can be re-used to reduce future programming costs. Conventional languages place conceptual limits on the way problems can be modularized. Functional languages push those limits back. Writing large software systems that work is difficult and expensive. Maintaining t ....etc

[:=Read Full Message Here=:]

168/2014
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.Ceramic cutting tools are made from :
(A)Tungsten powder
(B) Aluminium oxide powder
(C ) Titanium oxide powder
(D) Iron carbide powder

2.In a vernier micrometer 0.001” is divided into 10 divisions in vernier scale. The 10 vernier scale divisions is equal to how many thimble divisions for getting 0.0001” accuracy?
(A)9 divisions
(B)20 divisions
(C )10 divisions
(D)24 divisions

3.The cutting edge becomes stronger where the cuttingtool is provid ....etc

[:=Read Full Message Here=:]

DEVELOPMENT OF A MICRO DIAMOND GRINDING
TOOL BY COMPOUND PROCESS
SEMINAR REPORT
Submitted by
MUHAJIR.D.P
S7M3
College Of Engineering, Trivandrum
2007-11 batch



INDEX OF CONTENTS

Topics Page No

1. INTRODUCTION -1
2. EXPERIMENTAL HARDWARE -3
2.1. Developed Tabletop Machining Center. -3
2.2. Design of the Miniature Electroforming Tank. -4
3. EXPERIMENTAL PROCEDURES -6
3.1. Influence of the Anodic Shape. -6
3.2. Experiment for the Best Electroforming Zone. -7
3.3. Mi ....etc

[:=Read Full Message Here=:]

93/2014
Maximum : 100 marks
Time : 1 hour and 15 minutes

1.The mars mission of NASA is known as :
(A)Voyager
(B)Endeavour 
(C ) Discovery
(D) Quriosity

2.The constitutional amendment in India  right which made ‘Right to education' a Fundamental
(A) 73
(B)21
(C ) 86
(D) 61

3.Who among the following was the president the Ciuruvayur Satyagraha of the Guruvayur Satyagraha Samithi which led 1931?
(A)K.Kelappan
(B)C. Kesavan
(C ) K.P. Kesava menon
(D) Mannath Padmanabhan

4.Konjan Sodhi who received R ....etc

[:=Read Full Message Here=:]

Is this company legitimate company operating in the United States? ....etc

[:=Read Full Message Here=:]