Selective Catalytic Reduction (SCR), a process where a gaseous or liquid reductant (most commonly ammonia or urea) is added to the flue gas stream and is absorbed onto a catalyst. The reductant reacts with NOx in the flue gas to form H2O and N2.

Specialty Catalytic Converters are required to make an SCR system work, the current options being a Vanadium based catalyst, or a catalyst with Zeolites in the washcoat. In some jurisdictions use of a Vanadium based catalyst are frowned on (California) and the Zeolite type preferred, however Vanadium ....etc

[:=Read Full Message Here=:]

A catalytic converter automobiles in the (colloquially, 'cat' or 'catcon') is a device used to reduce the toxicity of emissions from an internal combustion engine. First widely introduced on series-productionUS market for the 1975 model year to comply with tightening EPA regulations on auto exhaust, catalytic converters are still most commonly used in motor vehicle exhaust systems. Catalytic converters are also used on generator sets, forklifts, mining equipment, trucks, buses, trains, and other engine-equipped machines. A catalytic converter p ....etc

[:=Read Full Message Here=:]

ANALYSIS OF CATALYTIC COATING IN THE COMBUSTION CHAMBER IN FOUR STROKE ENGINES

ABSTRACT:


The analysis of catalytic coating in the combustion chamber in four

stroke engine is done in order to improve the performance of the vehicle and also to

reduce the percentage of harmful pollutants in the exhaust gas. In four stroke engines,

the combustion chamber is modified by applying catalytic coating means of

electroplating. Catalytic materials are used in order to provide minimize the pollutant
....etc

[:=Read Full Message Here=:]

i am going to do prokject in this topic.please send me the detailed view of this topic and report with suitable diagram in wor format and power point format ....etc

[:=Read Full Message Here=:]

presented by:
Muhammad Ayaz
Iftikhar Ahmed
Murad Ali
Sumaira Shah


Process optimization of the Saponification reaction in CSTR by using statistical experimental design
Introduction
 A Design of Experiment (DOE) is a structured, organized method that is used to determine the relationship between the different factors (Xs) affecting a process and the output of that process (Y).
 When the results of these experiments are analyzed, they help to identify optimal conditions, the factors that most influen ....etc

[:=Read Full Message Here=:]

Design of Linear Model Predictive Controller for a Catalytic CSTR



What is Model Predictive Control?


MPC is a form of control in which
the current control action is obtained by solving on-line, at each sampling instant, a finite horizon open-loop optimal control problem,
using the current state of the plant as the initial state;

the optimization yields an optimal control sequence and the first control in this sequence is applied to the plant


....etc

[:=Read Full Message Here=:]

i want the project repot with word format and power point format....with detailed diagrams and report ....etc

[:=Read Full Message Here=:]

A catalytic converter automobiles in the (colloquially, 'cat' or 'catcon') is a device used to reduce the toxicity of emissions from an internal combustion engine. First widely introduced on series-productionUS market for the 1975 model year to comply with tightening EPA regulations on auto exhaust, catalytic converters are still most commonly used in motor vehicle exhaust systems. Catalytic converters are also used on generator sets, forklifts, mining equipment, trucks, buses, trains, and other engine-equipped machines. A catalytic converter p ....etc

[:=Read Full Message Here=:]

Selective Catalytic Reduction (SCR), a process where a gaseous or liquid reductant (most commonly ammonia or urea) is added to the flue gas stream and is absorbed onto a catalyst. The reductant reacts with NOx in the flue gas to form H2O and N2.

Specialty Catalytic Converters are required to make an SCR system work, the current options being a Vanadium based catalyst, or a catalyst with Zeolites in the washcoat. In some jurisdictions use of a Vanadium based catalyst are frowned on (California) and the Zeolite type preferred, however Vanadium ....etc

[:=Read Full Message Here=:]

Selective Catalytic Reduction (SCR), a process where a gaseous or liquid reductant (most commonly ammonia or urea) is added to the flue gas stream and is absorbed onto a catalyst. The reductant reacts with NOx in the flue gas to form H2O and N2.

Specialty Catalytic Converters are required to make an SCR system work, the current options being a Vanadium based catalyst, or a catalyst with Zeolites in the washcoat. In some jurisdictions use of a Vanadium based catalyst are frowned on (California) and the Zeolite type preferred, however Vanadium ....etc

[:=Read Full Message Here=:]