MAGNETICALLY CONTROLLED REACTORS TO ENHANCE TRANSMISSION CAPABILITY& SAVE ENERGY

ABSTRACT
The reactive power problem will become intensified in the future with the increasing use of EHV overhead lines and high-voltage cable in densely populated areas. Generators alone, with their under excited
limitations during light load periods, may not have sufficient capability to control voltages in some systems in which substantial amounts of high-voltage cable are used. Turbine generators with automatic voltage regulators, ....etc

[:=Read Full Message Here=:]

attachment=5153]
Continuous stirrer tank reactors in series.

Dpeartment of Chemical Engineering
NWFP UET PESHAWAR
Pakistan

Muhammad Azeem
Muhammad Shakir
Qazi Muhammad Ali
Sami Ullah
Mehfooz Ur Rehman
Jehangir Khan


Group Members
Muhammad Azeem
Muhammad Shakir
Qazi Muhammad Ali
Sami Ullah
Mehfooz Ur Rehman
Jehangir Khan
Supervisor:
Engr. Ihsan ullah


Mini Project
Continuous stirrer tank reactors in series.



Summary o ....etc

[:=Read Full Message Here=:]

The Atkinson cycle engine is a type of Internal combustion engine invented by James Atkinson in 1882. The Atkinson cycle is designed to provide efficiency at the expense of power.

The Atkinson cycle allows the intake, compression, power, and exhaust strokes of the four-stroke cycle to occur in a single turn of the crankshaft. Owing to the linkage, the expansion ratio is greater than the compression ratio, leading to greater efficiency than with engines using the alternative Otto cycle.

The Atkinson cycle may also refer to a four stroke en ....etc

[:=Read Full Message Here=:]

Chemical reactors



INTRODUCTION
Chemical reactors are one of the most important plants in chemical industry. Their operation, however, is corrupted with various uncertainties. Some of them arise from varying or not exactly known parameters, as e.g. reaction rate constants, heat transfer coefficients. In other cases, operating points of reactors vary or reactor dynamics is affected by various changes of parameters or even instability of closed loop control ....etc

[:=Read Full Message Here=:]

MAGNETICALLY CONTROLLED REACTORS TO ENHANCE TRANSMISSION CAPABILITY & SAVE ENERGY


Magnetically Controlled Reactor
A Magnetically controlled Reactor is device in Which DC Pulsing Through a Part of The Power Winding Changes The Duration to Period Ratio of The Magnetic Core Saturation There By Changing The Inductance And Inductive Susceptance
MCRs Are Powerful Low “inertia Inductors In Which Reactive power Can Be Regulated From .01 To 1.0 Time Rated Power
MCRs Significantly Reduced Idle Mode Power Lo ....etc

[:=Read Full Message Here=:]

The recent renewed interest on fluid-fuel nuclear systems has stimulated the development of models and methods for the physics of these systems, for both steady-state and transient analysis. The European research project MOST within the 5-th Framework Program has devoted a considerable effort to the assessment of models and computational tools for molten-salt systems. The seminar addresses the activities carried out at Politecnico di Torino on the neutronics of fluid-fuel systems. The basic physical phenomena connected to the motion of the fuel ....etc

[:=Read Full Message Here=:]

Atkinson cycle engine




The Atkinson cycle engine is a type of Internal combustion engine invented by James Atkinson in 1882. The Atkinson cycle is designed to provide efficiency at the expense of power.

The Atkinson cycle allows the intake, compression, power, and exhaust strokes of the four-stroke cycle to occur in a single turn of the crankshaft. Owing to the linkage, the expansion ratio is greater than the compression ratio, leading to greater efficiency than with engines using the alternative Otto cycle.

The Atkinson cycle may ....etc

[:=Read Full Message Here=:]

Disadvantages of atkinson cycle ....etc

[:=Read Full Message Here=:]

Introduction

The Atkinson cycle engine is a type of Internal combustion engine invented by James Atkinson in 1882. The Atkinson cycle is designed to provide efficiency at the expense of power.

The Atkinson cycle allows the intake, compression, power, and exhaust strokes of the four-stroke cycle to occur in a single turn of the crankshaft. Owing to the linkage, the expansion ratio is greater than the compression ratio, leading to greater efficiency than with engines using the alternative Otto cycle.

The Atkinson cycle may also ....etc

[:=Read Full Message Here=:]

please provide me abctract,full seminar report and ppt.. ....etc

[:=Read Full Message Here=:]