The Kalina cycle is a thermodynamic cycle for converting thermal energy to mechanical power which utilizes working fluid comprised of at least two different components and a ratio between those components is varied in different parts of the system to increase thermodynamical reversibility and therefore increase overall thermodynamic efficiency. There are multiple variants of Kalina cycle systems specifically applicable for different types of heat sources. Several proof of concept power plants using the kalina have already been built.

The Kal ....etc

[:=Read Full Message Here=:]

Scuderi Split Cycle Engine


The Scuderi Split Cycle Engine design is a rethink of the conventional four-stroke Otto cycle internal combustion engine conceived by Carmelo J. Scuderi (1925-2002). While as of this writing no working prototype of the engine exists, computer simulations carried out by the Scuderi Group and the Southwest Research Institute showed promising gains in efficiency and toxic emissions. It also has the innate capacity to power an air hybrid system.

n a conventional Otto-cycle engine, each cylinder performs four stro ....etc

[:=Read Full Message Here=:]

The Scuderi Split Cycle Engine design is a rethink of the conventional four-stroke Otto cycle internal combustion engine conceived by Carmelo J. Scuderi (1925-2002). While as of this writing no working prototype of the engine exists, computer simulations carried out by the Scuderi Group and the Southwest Research Institute showed promising gains in efficiency and toxic emissions. It also has the innate capacity to power an air hybrid system.

n a conventional Otto-cycle engine, each cylinder performs four strokes per cycle: intake, compressi ....etc

[:=Read Full Message Here=:]

Introduction

The Atkinson cycle engine is a type of Internal combustion engine invented by James Atkinson in 1882. The Atkinson cycle is designed to provide efficiency at the expense of power.

The Atkinson cycle allows the intake, compression, power, and exhaust strokes of the four-stroke cycle to occur in a single turn of the crankshaft. Owing to the linkage, the expansion ratio is greater than the compression ratio, leading to greater efficiency than with engines using the alternative Otto cycle.

The Atkinson cycle may also ....etc

[:=Read Full Message Here=:]

The Scuderi Split Cycle Engine design is a rethink of the conventional four-stroke Otto cycle internal combustion engine conceived by Carmelo J. Scuderi (1925-2002). While as of this writing no working prototype of the engine exists, computer simulations carried out by the Scuderi Group and the Southwest Research Institute showed promising gains in efficiency and toxic emissions. It also has the innate capacity to power an air hybrid system.

n a conventional Otto-cycle engine, each cylinder performs four strokes per cycle: intake, compressio ....etc

[:=Read Full Message Here=:]

Atkinson cycle engine




The Atkinson cycle engine is a type of Internal combustion engine invented by James Atkinson in 1882. The Atkinson cycle is designed to provide efficiency at the expense of power.

The Atkinson cycle allows the intake, compression, power, and exhaust strokes of the four-stroke cycle to occur in a single turn of the crankshaft. Owing to the linkage, the expansion ratio is greater than the compression ratio, leading to greater efficiency than with engines using the alternative Otto cycle.

The Atkinson cycle may ....etc

[:=Read Full Message Here=:]

In engineering, the Miller cycle is a combustion process used in a type of four-stroke internal combustion engine. The Miller cycle was patented by Ralph Miller (engineer), an American engineer, in the 1940s.

This type of engine was first used in ships and stationary power-generating plants, but was adapted by Mazda for their KJ-ZEM V6, used in the Millenia sedan. More recently, Subaru has combined a Miller cycle flat-4 with a hybrid driveline for their 'Turbo Parallel Hybrid' car, known as the Subaru B5-TPH.

A traditional Otto cycle engi ....etc

[:=Read Full Message Here=:]

The Atkinson cycle engine is a type of Internal combustion engine invented by James Atkinson in 1882. The Atkinson cycle is designed to provide efficiency at the expense of power.

The Atkinson cycle allows the intake, compression, power, and exhaust strokes of the four-stroke cycle to occur in a single turn of the crankshaft. Owing to the linkage, the expansion ratio is greater than the compression ratio, leading to greater efficiency than with engines using the alternative Otto cycle.

The Atkinson cycle may also refer to a four stroke en ....etc

[:=Read Full Message Here=:]

The Lenoir cycle is an idealised thermodynamic cycle for the pulse jet engine. An ideal gas undergoes

1. constant volume heating
2. reversible adiabatic expansion.
3. isobaric compression to the volume at the start of the cycle.

The expansion process is isentropic and hence involves no heat interaction. Energy is absorbed as heat during the constant volume process and rejected as heat during the constant pressure process. ....etc

[:=Read Full Message Here=:]

Preface:
Power generation is an important issue today, especially on the West Coast. Demand is outweighing supply because of lack of incentives for the utilities industry to build additional power plants over the past 10-20 years. Electrical innovations (such as the personal computer) were not accounted for in earlier predictions of power utilization and, now, the country is in dire need of streamlining the current power plants while pushing through as many applications as possible for new power plants. In response to this situation, ....etc

[:=Read Full Message Here=:]