Submitted By
Vinit Tarey


ABSTRACT
Many system-on-chip (SoC) integrated circuits contain embedded cores with different scan frequencies. To better meet the test requirements for such heterogeneous SoCs, leading tester companies have recently introduced port-scalable testers, and Many IP core design software like Xilinx, Leonardo Spectrum, and Modelsim etc which can used to design ip core like DMA ,Interrupt Controller etc .These Ip core can be Power aware an Implement on soc by choosing different design tech ....etc

[:=Read Full Message Here=:]

Incorporation of FACTS Controllers in Newton Raphson Load Flow for Power Flow Operation, Control and Planning: A Comprehensive Survey
Abstract-
This paper presents a comprehensive survey ofincorporation of FACTS controller such as SVC, TCSC,SSSC, STATCOM, UPFC, and IPFC devices in Newton-Raphson load flow (NRFL) for power flow control. Thepurpose of this paper is to present a comprehensive surveyof various FACTS controllers are incorporated in loadflow analysis for different point of view such as optimalpower flow control, planning an ....etc

[:=Read Full Message Here=:]

DESIGN AND DEVELOPMENT OF LASER SHEET BASED FLOW VISUALIZATION SET-UP FOR CALANDRIA BASED NUCLEAR REACTOR
INTRODUCTION:
The understanding of Fluid Flow phenomenon
Main role of flow visualization in experimental and Computational fluid dynamics
Analysis of Nuclear reactor i.e. Calandria (PHWR) is most often accomplished with small scale model, in Flow Visualization Technique with LASER and commercially available CFD package.
STATEMENT OF PROBLEM:
Understanding of Three-Dimensional distributions of F ....etc

[:=Read Full Message Here=:]

Integrating Structural Design and Formal Methods in RealTime System Design

Formal methods have been advocated as one of those techniques that can produce highquality software and hardware systems that has been demonstrated to come in ontime, within budget, and satisfy procurer requirements. They are, however, perceived to be difficult to use and unsuitable for presentation to nonspecialists. In addition, they have been criticized for paying too little attention to the system development process.
....etc

[:=Read Full Message Here=:]

Formal methods have been advocated as one of those techniques that can produce highquality software and hardware systems that has been demonstrated to come in ontime, within budget, and satisfy procurer requirements. They are, however, perceived to be difficult to use and unsuitable for presentation to nonspecialists. In addition, they have been criticized for paying too little attention to the system development process.

Traditional structured (bubblesandarrows) methods, however, do excel at supporting the development process, but do not ....etc

[:=Read Full Message Here=:]

Common Emitter BJT Amplifier Design Current Mirror Design


Some Random Observations
● Conditions for stabilized voltage source biasing
● Emitter resistance, RE, is needed.
● Base voltage source will have finite resistance, RB.
● needs to be much larger than RB.
● Small RB - relative to RS - will attenuate input signal.
● Larger RE permits larger RB, but results in lower gain.
● Gain = -RC/RE for RE >> re.
● Split RE with bypassing increa ....etc

[:=Read Full Message Here=:]

blockdiagram of electronic voting machine..
and implementation

block diagram and implementation of electronic voting machine ....etc

[:=Read Full Message Here=:]

This article is presented by:
Sapana Mehta


Design Patterns


A pattern is a proven solution to a problem in a context.
Christopher Alexander says each pattern is a three-part rule which expresses a relation between a certain context, a problem, and a solution.
Design patterns represent a solutions to problems that arise when developing software within a particular context.
i.e Patterns = problems.solution pairs in a context

Background

Started in 1987 by Ward Cunningham and Ken Beck who were workin ....etc

[:=Read Full Message Here=:]

DIGITAL DESIGN FLOW OPTIONS
ABSTRACT
VLSI (Very Large Scale Integration) IC design flow is a term used to
describe the process of chip design. The circuit designer/design group uses a
multitude of computer aided design tools throughout the design flow to tape out an
integrated circuit IC. There are numerous computer aided design (CAD) tools
available commercially to help such designers in design. The design tools and the
order in which they are used is termed as the design flow.
CAD tools however do have certain problems a ....etc

[:=Read Full Message Here=:]

Usefulness of DC Power Flow for Active Power Flow Analysis



I. INTRODUCTION
STATIC power system analysis has always been
performed using full power flow. It is one of the
fundamental tools for power system analysis and is used in
the operational as well as planning stages. Vertically
integrated companies have used it to control their systems, as
well as to plan the optimal economic operation of generation
resources, either by means of optimal power flo ....etc

[:=Read Full Message Here=:]