i want seminar topics and seminars,seminars topics for mcaseminars topics for civil engineering ....etc

[:=Read Full Message Here=:]

Usefulness of DC Power Flow for Active Power Flow Analysis



I. INTRODUCTION
STATIC power system analysis has always been
performed using full power flow. It is one of the
fundamental tools for power system analysis and is used in
the operational as well as planning stages. Vertically
integrated companies have used it to control their systems, as
well as to plan the optimal economic operation of generation
resources, either by means of optimal power flo ....etc

[:=Read Full Message Here=:]

Axial-field electrical machines offer an alternative to the conventional machines. In the axial-field machine, the air gap flux is axial in direction and the active current carrying conductors are radially positioned. This paper presents the design characteristics, special features, manufacturing aspects and potential applications for axial-field electrical machines. The experimental from several prototypes, including d.c. machines, synchronous machines and single-phase machines are given. The special features of the axial-field machine, such a ....etc

[:=Read Full Message Here=:]

ac pipes for axial load carrying capacity thesis pdf ....etc

[:=Read Full Message Here=:]

i would like to take this topic for my final semester seminar . could you provide me with the related contents, papersand links that can be helpful in preparing me for this topic ....etc

[:=Read Full Message Here=:]

Most of the gas turbines employ the axial flow turbines.

The article is concerned with axial flow turbines.

The radial turbine can handle low mass flows more efficiently than the axial flow machines.

Elementary Theory of Axial Flow Turbine:
The velocity triangles for one axial flow turbine stage and the nomenclature employed are shown. The gas enters the row of nozzle blades with a static pressure and temperature P1, T1, and a velocity C1, is expanded to P2, T2, with an increased velocity C2 at an angle Alpha2



For the ....etc

[:=Read Full Message Here=:]

Axial Force Sensor for a Semi-Autonomous Snake Robot



I. INTRODUCTION
Various developments in robotics concentrate on mobile
robots to aid humans in new ways in their work and life.
Typical examples are remote inspection and maintenance
devices, personal assistants, and rescue robots. This research
concentrates on a particular type of robot for inspection in
unstructured environments like rubble or rocks. This type,
snake like robots, was chosen becaus ....etc

[:=Read Full Message Here=:]

I am choto kumar ,
I want a full seminar of the topic Magneto Abrasive Flow Machining .I want a pdf file with diagram of the above topic.
i am doing btech in mechanical engg, i have to give a seminar of the above topic on sept 6. if u give me some guidence then i will do well in seminars.

....etc

[:=Read Full Message Here=:]

SEMINAR REPORT ON EVALUATION OF FLOW LIQUEFACTION AND LIQUEFIED SHEAR STRENGTH USING CONE PENETRATION TEST


ABSTRACT

Flow liquefaction is a major design issue for large soil structures such as mine tailings impoundments and earth dams. If a soil is strain softening in undrained shear and, hence, susceptible to flow liquefaction, an estimate of the resulting liquefied shear strength is required for stability analyses. Many procedures have been published for estimating the residual or liquefie ....etc

[:=Read Full Message Here=:]

Incorporation of FACTS Controllers in Newton Raphson Load Flow for Power Flow Operation, Control and Planning: A Comprehensive Survey
Abstract-
This paper presents a comprehensive survey ofincorporation of FACTS controller such as SVC, TCSC,SSSC, STATCOM, UPFC, and IPFC devices in Newton-Raphson load flow (NRFL) for power flow control. Thepurpose of this paper is to present a comprehensive surveyof various FACTS controllers are incorporated in loadflow analysis for different point of view such as optimalpower flow control, planning an ....etc

[:=Read Full Message Here=:]