i am sumit nayak.
please give me full description on dc arc furnace with abstract. ....etc

[:=Read Full Message Here=:]

Plasma Arc Treatment of Municipal and
Hazardous Wastes

Catherine Bodurow, USEPA/OPPTS/OPPT/RAD
Louis J. Circeo, Kevin C. Caravati, Robert C. Martin, Michael S. Smith
Georgia Institute of Technology - Georgia Tech Research Institute


abstract

Plasma treatment of waste materials offers a solution that could effectively and safely dispose of municipal, hazardous, and toxic wastes that are generated by the residential, commercial, and industrial sectors of our economy. Plasma arc technology us ....etc

[:=Read Full Message Here=:]

Abstract :

The case study project is significant since mild steel is used in structure, case hardening, gears, free cutting steels, shafting, forging etc. Mild steel plates were tested for mechanical properties like hardness, tensile strength, yield point etc. Later on the plates were joined by submerged arc welding and the mechanical properties were estimated again. Also weld ability, harden ability, tensile test etc. were conducted for the same result. ....etc

[:=Read Full Message Here=:]

Development Of Basic Agglomerated Flux For Submerged Arc Welding
Deviprakash K J & Anand Krishnan O K
Department of Mechanical Engineering
Mohandas College of Engineering and Technology



Abstract
A significant percentage of the flux used in submerged are welding gets converted into very fine particles particles
termed as flux dust due to transportation and handling. If these very fine particles are not removed fromt he flux before
welding, it may results ....etc

[:=Read Full Message Here=:]

Introduction:
The plasma welding process was introduced to the welding industry in 1964 as a method of bringing better control to the arc welding process in lower current ranges. Today, plasma retains the original advantages it brought to industry by providing an advanced level of control and accuracy to produce high quality welds in miniature or precision applications and to provide long electrode life for high production requirements.
The plasma process is equally suited to manual and automati ....etc

[:=Read Full Message Here=:]

ARC-FAULT CIRCUIT INTERRUPTER(AFCI)
INTRODUCTION
Annually, 40,000 fires - 300 deaths - over 1,400 injuries
Arcing faults are the major cause of residential fires. In 1994 an insurance company survey of 660 electrical fires indicated that over 33% of these fires were from arcing condition.
An arc fault is the flow of electricity over an unintended path. 
Unwanted arcing generates high temperatures and discharges molten metal that can ignite nearby combustibles such as paper, insulation, vapors, and carpets.
Te ....etc

[:=Read Full Message Here=:]

SURVEY OF SEAM TRACKING SYSTEMS FOR ROBOTIC ARC WELDING
JUSTIN JOSE
S7 MECHANICAL



CONTENTS


1 INTRODUCTION

2 THRU ARC SEAM TRACKING

3 ARC VOLTAGE CONTROL

4 LASER VISION SYSTEM

5 TOUCH SENSING

6 OPTIONAL FEATURES

7 SENSOR COMPARISION CHART

8 CONCLUSION

INTRODUCTION


Several types of continuous arc welding process can be accomplished by industrial robots capable of continuous path motion.These processes inclu ....etc

[:=Read Full Message Here=:]

An Improved Nonlinear STATCOM Control for Electric Arc Furnace Voltage Flicker Mitigation
Abstract
Electric arc furnaces (EAFs) are prevalent in the steel industry to melt iron and scrap steel. EAFs frequently cause large amplitude fluctuations of active and reactive power and are the source of significant power-quality (PQ) disturbances. Static synchronous compensators (STATCOMs) provide a power-electronicbased means of embedded control for reactive power support and PQ improvement. This paper introduces a new nonlinear cont ....etc

[:=Read Full Message Here=:]

1)abstract
2)introduction
3)classification
4)procedure
5)working&its image
6)advantage&disadvantage
7)application
8)conclution
9)reference websites. ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]