A SEMINAR ON
ADAPTIVE CONTROL MACHINING
ABSTRACT

Adaptive control system is a logical extension of the CNC-mechanism. In CNC mechanism the cutting speed and feed rates are prescribed by the part programmer. The determination of these operating parameters depends on the Knowledge and experience regarding the work piece, tool materials, coolant conditions and other factors.
By contrast in adaptive control machining, there is improvement in the production rate and reduction in t ....etc

[:=Read Full Message Here=:]

Composites materials for aerospace applications
Abstract:
Fibre-reinforced polymer composite materials are fast gaining ground as preferred materials for construction of aircrafts and spacecrafts. In particular, their use as primary structural materials in recent years in several technology-demonstrator front-line aerospace projects world-wide has provided confidence leading to their acceptance as prime materials for aerospace vehicles. This paper gives a review of some of these developments with a discussion of the proble ....etc

[:=Read Full Message Here=:]

now i am doing my b.e project on connecting rod and in this i need some data for desining calculation of con rod...
1 allowable tensile stress
2allowable bending stress
3compressive yield strees of material C70S6 ....etc

[:=Read Full Message Here=:]

PLZ SEND MATERIAL FOR THIS TOPIC ....etc

[:=Read Full Message Here=:]

SA 516 M GR 485 PLATE has got Carbon percentage of 0.29 , Then the Mn percentage should be ....etc

[:=Read Full Message Here=:]

ZIGBEE and GSM-SMS Based Conductor Temperature and Sag Monitoring
Presented By
ANEESH P
Roll No. 203
Electrical and electronics engg.
College of engineering, Trivandrum


contents

Introduction
Study on Relative Models
Preambles of Conductor Capacity Ratings
Dynamic Thermal Line Ratings (DTLR)
Traditional Methods for DTLR
The Structure of the Monitoring System
The Topology of System
Structure and Design of Monitoring Unit
The structure of temperature monitoring device
The structure of tem ....etc

[:=Read Full Message Here=:]

DESIGN OF PRESSURE VESSEL

ABSTRACT
This project work deals with a detailed study and design procedure of pressure vessel. A detailed study of various parts of pressure vessels like shell, closure, support, flanges, nozzles etc. Design is carried according to rules of ASME code section VIII, Division I.
The first chapter deals with detailed study of pressure vessel i.e. the various materials used in pressure construction and temperature are mentioned .It also deals with the study of various parts like flanges, support e ....etc

[:=Read Full Message Here=:]

Dear Sir,

Please help me to regarding Allowable stress values for Indian Mild Steel (IS 2062 Gr. A) for various temperature range Eg. -10 Deg C to Max. upper limit.

Thanks & Regard,

Vijay
....etc

[:=Read Full Message Here=:]

Introduction

The Digital Visual Interface (hereinafter DVI) specification provides a high-speed digital connection for visual data types that is display technology independent. The interface is primarily focused at providing a connection between a computer and its display device. The DVI specification meets the needs of all segments of the PC industry (workstation, desktop, laptop, etc) and will enable these different segments to unite around one monitor interface specification.

The DVI interface enables:
1. Conten ....etc

[:=Read Full Message Here=:]

STATIC TIMING ANALYSIS
Introduction
Effective methodology for verifying the timing characteristics of a design without the use of test vectors
Conventional verification techniques are inadequate for complex designs
Simulation time using conventional simulators
Thousands of test vectors are required to test all timing paths using logic simulation
Increasing design complexity & smaller process technologies
Increases the number of iterations for STA
Simulation vs. Static timing
OVERVIEW
STA in ASIC Des ....etc

[:=Read Full Message Here=:]

DESIGN OF BOILER STACK
ABSTRACT
Chimney, which form the last component of a system using a flue gas such as feoiler, IC engines, play a vital role in maintaining efficiency, draft, etc, of a system and also in minimizing the atmospheric pollution.
The boiler plant of HOCL had used LSHS (low Sulphur heavy stock) as a fuel. Recently they changed the fuel to LSFO (low Sulphur furnace oil). As a combined effect of increased corrosion rate and natural calamities the stack had undergone failure. As per the Kerala State Polluti ....etc

[:=Read Full Message Here=:]

what is the allowable stress
for carbon steel plates ....etc

[:=Read Full Message Here=:]