i want report on the topic high step up dc dc converter for a microgrid plz help ....etc

[:=Read Full Message Here=:]

i am at an initial stage of my b.e project .
so kindly send me some ppts for my initial presentation on above topic. ....etc

[:=Read Full Message Here=:]

Pulse Shape Improvement in Core-Type High-Voltage Pulse Transformers With Auxiliary Windings
High-voltage pulsed power technologies are rapidly emerging as a key to efficient and flexible use of electrical power for many industrial applications. One of the most important elements in high-voltage pulse-generating circuit technology is the transformer, generallyused to further increase the pulse output voltage level. However, its nonideal behavior has significant influence on the output pulse shape.The most attractive winding configurati ....etc

[:=Read Full Message Here=:]

non isolated high step up boost converter integrated with sepic converter matlab simulink model ....etc

[:=Read Full Message Here=:]

Abstract
This paper deals with a reduced rating delta-polygon
autotransformer based twenty-four-pulse ac-dc converter feeding
variable frequency induction motor drives (VFIMD's) for
improving power quality at the point of common coupling (PCC).
The proposed twenty four-pulse ac-dc converter is realized on the
principle of dc ripple re-injection technique for harmonic
mitigation. The design of the proposed autotransformer is
developed alongwith the necessary modifications required for
making it suitable for retrofit applications ....etc

[:=Read Full Message Here=:]

ABSTRACT
This paper describes the design and implementation of a Three Phase Power Converter (AC/DC/AC) as a fourth year group project for the Power Electronics and Drives B subject at Victoria University. The system implemented converts a three phase input voltage of 400 Vrms at a power rating of 500 W to DC by using a three phase diode bridge rectifier, and a Capacitive filter which assists in stabilising the output DC voltage produced. After that, the system provides the gate drive signal to a three phase pulse width modulated (PWM) ....etc

[:=Read Full Message Here=:]

Hello,

I'm Hariharan from PSG Tech. I saw the list of automobile projects that was available and the topic DESIGN AND FABRICATION OF PROPELLER SHAFT AND TIE ROD BEND TESTING AND BEND REMOVING MACHINE caught my eye.
I'm interested in knowing more on this project, i.e instructions on how to build it and its report.
I've planned to select this topic for my mini project, so an earlier reply will be much appreciated.

Regards
....etc

[:=Read Full Message Here=:]

DESIGN AND FABRICATION OF PULSE TUBE REFRIGERATION SYSTEM

ABSTRACT
Cooling effect at one end of a hollow tube with a pulsating pressure in the inside gas, was first observed by Gifford and Longsworth in early sixties. This marks the inception of one of the most promising cryogenic refrigerators known as 'pulse tube refrigerator' (PTR). Cryogenics is the science of low temperature. Cryogenics refers to the entire phenomenon occurring below -150°C or 123K. Cryogenic engineering involves the design and development of ....etc

[:=Read Full Message Here=:]

I NEED PPT REGARDING DC-DC INTERLEAVED BOOST CONVERTERS APPLIED TO PV PANEL WITH OR WITHOUT MPPT ....etc

[:=Read Full Message Here=:]

ppt for nonisolated high stepup boost converter integrated with sepic converter ....etc

[:=Read Full Message Here=:]