Infrared Remote Control

The transmitter circuit includes IR LED, 2N2222 NPN Silicon Transistor , 2N2907 PNP Silicon Transistor.When the switch S1 presses LED emits IR light. The receiver part mainly consists of LM308 Op Amp IC , LM567 Tone Decoder, and NPN Phototransistor and a relay.

http://pptpdf.net/subcategory.php?categ=unknown&categ_id=1&/Project%20Reports/Electrical-Electronics-Apllied_Electronics-Instrumentation/project%20list1 ....etc

[:=Read Full Message Here=:]

i want to know more about this topic ....etc

[:=Read Full Message Here=:]

Infrared thermography has evolved into one of the most valuable diagnostic tools for Predictive Maintenance of electrical equipment from reliability and safety point of view. By detecting anomalies often invisible to the naked eye, thermography allows corrective action to be taken before costly system failures occur or where safety of man and machine are at stake. By utilizing thermography to inspect electrical systems and components under load, the faulty components can be identified and thus heavy loss of health and wealth is avoided. Infrare ....etc

[:=Read Full Message Here=:]

Infrared thermography has evolved into one of the most valuable diagnostic tools for Predictive Maintenance of electrical equipment from reliability and safety point of view.

By detecting anomalies often invisible to the naked eye, thermography allows corrective action to be taken before costly system failures occur or where safety of man and machine are at stake. By utilizing thermography to inspect electrical systems and components under load, the faulty components can be identified and thus heavy loss of health and wealth is avoided.

....etc

[:=Read Full Message Here=:]

abstract:
Infrared thermometers measure temperature using blackbody radiation (generally infrared) emitted from objects,Infrared thermometers is a non-contact thermometers to measure temperature from a distance.The basic design consists of a lens to focus the infrared energy on to a detector, which converts the IR energy to an electrical signal that can be displayed in units of temperature after being compensated for ambient temperature variation,Infrared thermometers (IR) can be use in some critical conditions like Detecting clouds for remot ....etc

[:=Read Full Message Here=:]

Infrared and thermal imaging is a global area inspection technique that detects and measures temperature and temperature differences to detect indication of disbond, delamination, cracks, residual stress and other conditions that impact heat flow. IR images provides temperature maps. Thermography is the use of IR imaging and measurement camera to see and measure thermal energy. Thus thermography measures heat which is constantly radiating away from any surface. This method is attractive for diagnosis because of its safe and non-invasive nature. ....etc

[:=Read Full Message Here=:]

Infrared thermography has evolved into one of the most valuable diagnostic tools for Predictive Maintenance of electrical equipment from reliability and safety point of view. By detecting anomalies often invisible to the naked eye, thermography allows corrective action to be taken before costly system failures occur or where safety of man and machine are at stake. By utilizing thermography to inspect electrical systems and components under load, the faulty components can be identified and thus heavy loss of health and wealth is avoided. Infrare ....etc

[:=Read Full Message Here=:]

Different types of Non-Destructive tests (NDT) are there to detect voids and cracks in concrete such as Ultrasonic Pulse Echo, Ultrasonic Pulse Velocity, Ground Penetrating Radar, Impact Echo Method, X-ray Scanning Method, Rebound Hammer Method, Infrared Thermography Method .In which Infrared Thermography method is discussed in this paper
As concrete is used in newer areas and evidence is coming to light of premature deterioration in concrete structures there is a need to develop new methods for quality control at the time of concrete construc ....etc

[:=Read Full Message Here=:]

HELLO SIR,
I'M A STUDENT OF B.TECH , FINAL YEAR. I WANT TO WORK ON 12 CHANNEL INFRARED REMOTE CONTROLLED SYSTEM. FOR THIS I'M USING AT89C2051 MICROCONTROLLER. SO, PLEASE PROVIDE THE REQUIRED PROGRAM SO THAT I COULD GIVE A PRESENTATION ON IT .PLAESE HELP AS SOON AS POSSIBLE.
I SHALL BE OBILIGED IF U DO SO.
THANK YOU. ....etc

[:=Read Full Message Here=:]

Different types of Non-Destructive tests (NDT) are there to detect voids and cracks in concrete such as Ultrasonic Pulse Echo, Ultrasonic Pulse Velocity, Ground Penetrating Radar, Impact Echo Method, X-ray Scanning Method, Rebound Hammer Method, Infrared Thermography Method .In which Infrared Thermography method is discussed in this paper
As concrete is used in newer areas and evidence is coming to light of premature deterioration in concrete structures there is a need to develop new methods for quality control at the time of concrete construc ....etc

[:=Read Full Message Here=:]