i am going to do prokject in this topic.please send me the detailed view of this topic and report with suitable diagram in wor format and power point format..............etc

[:=Read Full Message Here=:]

D.S.Choudhari,
Final sem students M.Tech(MED)
Prof.(Mrs.) S.D.Moghe,(Project Guide)
Department of Mechanical Engineering




Abstract

the present paper the problem is discussed on Tractor Engine Assembly & Testing. It has been seen that during the engine testing most of the time some engine fails. That means they may have a problem of seizing. In fact, the seizure of the engine is not taking place suddenly but some type of warning given by engine during testing conditions in terms of white smoke. In..............etc

[:=Read Full Message Here=:]

ABSTRACT
Combustion chamber deposits are found in all internal combustion engines. When fuel and air burn inside an internal combustion engine, deposits form on the walls inside the cylinder. The factors influencing deposit formation are changes in fuel composition, coolant temperatures, engine speed and load, and spark timing. One way to discourage deposit formation is to prevent condensation. Raising the wall temperature prevent condensation. With increased wall temperature, hydrocarbon condensation te..............etc

[:=Read Full Message Here=:]

Modern radiation therapy techniques, such as stereotactic radiotherapy and tomotherapy, deliver the total treatment dose to the patient using many small fields. This helps to construct a dose distribution which delivers a high dose to the tumour, while minimizing the dose to normal tissue. When considering a single small field, the dose resulting from that small field is usually reported as a relative dose factor (RDF). The RDF is the percentage of dose in a small field as compared to a large reference field. Task group report #51 from the Amer..............etc

[:=Read Full Message Here=:]

ANALYSIS OF CATALYTIC COATING IN THE COMBUSTION CHAMBER IN FOUR STROKE ENGINES

ABSTRACT:


The analysis of catalytic coating in the combustion chamber in four

stroke engine is done in order to improve the performance of the vehicle and also to

reduce the percentage of harmful pollutants in the exhaust gas. In four stroke engines,

the combustion chamber is modified by applying catalytic coating means of

electroplating. Catalytic materials are used in order to provide minimize the pollutant
..............etc

[:=Read Full Message Here=:]

Blow molding


1. INTRODUCTION

Blow molding, also known as blow forming, is a manufacturing process by which hollow plastic parts are formed. It is a process used to produce hollow objects from thermoplastic.
In general, there are three main types of blow molding: extrusion blow molding, injection blow molding, and stretch blow molding.
The blow molding process begins with melting down the plastic and forming it into a parison or preform. The parison is a tube-like piece of plastic with a hole in one end..............etc

[:=Read Full Message Here=:]

ADVANCES IN POWER PLANT STEAM BLOW CLEANING ANALYSES


Bechtel Power Corporation
Frederick, Maryland, USA
Paul J. Babel
Bechtel Power Corporation
Frederick, Maryland, USA
Allen T. Vieira
Bechtel Power Corporation
Fredrick, Maryland, USA

ABSTRACT
Steam blows are used prior to initial turbine powering for steam power plants to clear debris and surface scale that could potentially damage turbine blades during plant operation. Based on experience from steam blows for several dozen plants, enhancements have been m..............etc

[:=Read Full Message Here=:]

ABSTRACT
Steam generators are widely used in industries for several purposes like power production, processing, heating etc. In industry steam generators are the major fuel consumers. In a normal steam generator about 4% of hot water is wasted as blow down. Due to this, a large amount of heat energy is wasted. This project aims to bring a heat recovery system to prevent heat losses, so that a large savings can be made. So in ths a heat recovery system was designed to ..............etc

[:=Read Full Message Here=:]

i want the project repot with word format and power point format....with detailed diagrams and report..............etc

[:=Read Full Message Here=:]

FUSE BLOWN INDICATOR WITH VOICE BASED ANNOUNCEMENT SYSTEM..............etc

[:=Read Full Message Here=:]