Posts: 2,481
Threads: 1,434
Joined: Mar 2010
in this project PLC is used to control the flow of lubricating oil at specified level , this can be done to on bearing, journals and other engine part by installing a transducer near to it , automatically controlling the lubrication of a bearing can be performed either by a stationary installed vibration servo or by measuring the real amount of grease being fed into the bearing . The figure shows a flow transducer unit installed directly in to the grease point. The unit closes/opens a switch which can be used to monitor the real grease flow. Each dosage from the automatic system will be measured by the transducer; and when the difference is larger than specified, an alarm will be energized by a PLC to get better accuracy
Posts: 4,190
Threads: 817
Joined: Feb 2012
Posts: 7,939
Threads: 421
Joined: Jun 2012
(18-02-2012, 09:59 AM)seminar paper Wrote: to get information about the topic PLC Based Automatic Bottle Filling System full report ppt and related topic refer the page link bellow
http://studentbank.in/report-plc-based-a...le-filling
http://studentbank.in/report-plc-based-a...ing-system
http://seminarsprojects.in/attachment.php?aid=14236
Posts: 7,939
Threads: 421
Joined: Jun 2012
(18-02-2012, 09:59 AM)seminar paper Wrote: to get information about the topic PLC Based Automatic Bottle Filling System full report ppt and related topic refer the page link bellow
http://studentbank.in/report-plc-based-a...le-filling
http://studentbank.in/report-plc-based-a...ing-system
http://seminarsprojects.in/attachment.php?aid=14236