23-11-2012, 01:29 PM
|
pdf information about automatic machines
|
11-11-2013, 02:38 PM
13-03-2015, 07:53 PM
Infomation,aims & objectives,need & importance,presentation of data & information,conclusion,opinion & suggestion,references & annexures about automatic machine for project
07-11-2015, 11:16 AM
07-11-2015, 01:45 PM
pdf information about automatic machines
a machine or machine tool (such as a spinning machine or lathe) that after once being set operates automatically except for applying the power, lubricating, supplying material, and shutting off the power
Simulation for Automatic Machinery or SAM were two unique minicomputers built by the Norwegian Defence Research Establishment (NDRE) in the mid-1960s. SAM 1, built between 1962 and 1964, was the first Norwegian-built programmable computer. It featured 4,096 14-bit words of memory and 14 registers and was used in-house at NDRE. SAM 2 was built between 1966 and 1967 and was used for analysis of satellite imagery at Tromsø Satellite Station. A third-generation computer, it was among the first three in the world to use integrated circuits.
An automatic lathe is a lathe (usually a metalworking lathe) whose actions are controlled automatically. Although all electronically controlled (CNC) lathes are automatic, they are usually not called by that name, as explained under "General nomenclature". The first kinds of automatic lathes were mechanically automated ones, from the 1870s until the advent of NC and CNC in the 1950s and 1960s. CNC has not yet entirely displaced mechanically automated machines. The latter type of machine tool is no longer being newly built, but many existing examples remain in service.
a machine or machine tool (such as a spinning machine or lathe) that after once being set operates automatically except for applying the power, lubricating, supplying material, and shutting off the power
Simulation for Automatic Machinery or SAM were two unique minicomputers built by the Norwegian Defence Research Establishment (NDRE) in the mid-1960s. SAM 1, built between 1962 and 1964, was the first Norwegian-built programmable computer. It featured 4,096 14-bit words of memory and 14 registers and was used in-house at NDRE. SAM 2 was built between 1966 and 1967 and was used for analysis of satellite imagery at Tromsø Satellite Station. A third-generation computer, it was among the first three in the world to use integrated circuits.
An automatic lathe is a lathe (usually a metalworking lathe) whose actions are controlled automatically. Although all electronically controlled (CNC) lathes are automatic, they are usually not called by that name, as explained under "General nomenclature". The first kinds of automatic lathes were mechanically automated ones, from the 1870s until the advent of NC and CNC in the 1950s and 1960s. CNC has not yet entirely displaced mechanically automated machines. The latter type of machine tool is no longer being newly built, but many existing examples remain in service.
|
« Next Oldest | Next Newest »
|
