Posts: 604
Threads: 584
Joined: Dec 2008
Science and technology with all its miraculous advancements has fascinated human life to a great extent that imagining a world without these innovations is hardly possible. While technology is on the raising slope, we should also note the increasing immoral activities. With a technical view, "Power Theft" is a non-ignorable crime that is highly prevalent, and at the same time it directly affects the economy of a nation.
Electricity is the modern man's most convenient and useful form of energy without which the present social infrastructure would not be feasible. The increase in per capita production is the reflection of the increase in the living standard of people. When importance of electricity is on the increasing side, then how much should theft of this energy or illegal consumption of power from the transmission lines be averted? Power theft has become a great challenge to the electricity board. The dailies report that Electricity Board suffers a total loss of 8 % in revenue due to power theft every year, which has to controlled. Our paper identifies the Power theft and indicates it to the Electricity board through Power line. We had also dealt about the remote monitoring of an energy meter.
Microcontroller based automation:-
Embedded systems - a combination of software, hardware and additional mechanical parts that together forms a component of a larger system, to perform a specific function. It's a technology, characterized by high reliability, restricted memory footprint and real time operation associated with a narrowly defined group of functions. Automation has made the art of living comfortable and easy. Embedded systems have made the process of automation a most successful one. Here, we have focused on automotive, an area of embedded controllers, in which we have dealt with the Power theft identification and also about the remote monitoring of an energy meter.
Modern detecting tools:-
There are many modern tools that assist in power theft identification. Some of them are :-
a.Tamper proof seals and labels.
b.Meter leaders.
c.Tamper resistant screws / locks.
d.Check meter and remote meter readers.
e.Tamper alarms and sensors.
This paper undertakes the Check meter and remote meter readers for power theft identification. In our case, the consumption recurred by the check meter is compared with the revenue meters consumption. If there is a difference, then it indicates either there is a theft or revenue meter malfunction . The check meter can also be used to monitor the energy used on the secondary of a distribution transformer serving several customer and compared to the sum of all the meter usage. Besides spotting out the line where power theft is suspected to occur, it al
Posts: 1
Threads: 0
Joined: Aug 2009
good idea. can iget the details please
Posts: 1
Threads: 0
Joined: Sep 2009
Hey i like the idea. Can u give me the details of the topic
computer science crazy
Guest
You have to make a automatic comparison mechanism using microcontroller
Posts: 1
Threads: 0
Joined: Sep 2009
07-09-2009, 10:48 PM
sir,
i want to make this project please help me.
send me all the info. like ckt. dia.,comonent required,data sheets & other useful info.
Please send me soon to my email ani_crazy88[at]yahoo.com
i m waiting.............................
sir,
i want to make this project please help me.
send me all the info. like ckt. dia.,comonent required,data sheets & other useful info.
Please send me soon to my email ani_crazy88[at]yahoo.com
i m waiting.............................
Posts: 2
Threads: 1
Joined: Sep 2010
Dear Sir,
I would like to know more about this project. Can you please send me the details to my id : gobiha[at]gmail.com.
Thanks in advance,
S.Gobiha
Posts: 2
Threads: 1
Joined: Aug 2010
can i get more details abt dis project, including circuit diagram and cost
Posts: 3
Threads: 0
Joined: Jul 2010
Science and technology with all its miraculous advancements has fascinated human life to a great extent that imagining a world without these innovations is hardly possible. While technology is on the raising slope, we should also note the increasing immoral activities. With a technical view, “Power Theft†is a non-ignorable crime that is highly prevalent, and at the same time it directly affects the economy of a nation. Data collected over Tirunelveli District, Bhel Trichy proves the necessity of this project.
Detecting and eradicating such crimes with the assistance of the developing scientific field is the “Need of the Hourâ€. With these views was this paper conceived and designed. Our paper provides a complete and comprehensive tool to prevent power theft which is very simple to understand and easy to implement(Accepted by T.N.E.B officials). It includes four sections – transmitting, receiving, counter display and processing sections.
Posts: 5,362
Threads: 2,998
Joined: Feb 2011
[attachment=8735]
ABSTRACT
Science and technology with all its miraculous advancements has
fascinated human life to a great extent that imagining a world without these innovations is hardly possible. While technology is on the raising slope, we should also note the increasing immoral activities. With a technical view, “Power Theft” is a non-ignorable crime that is highly prevalent, and at the same time it directly affects the economy of a nation. Data collected over Tirunelveli District, Bhel Trichy proves the necessity of this project.
Detecting and eradicating such crimes with the assistance of the
developing scientific field is the “Need of the Hour”. With these views was this paper conceived and designed. Our paper provides a complete and comprehensive tool to prevent power theft which is very simple to understand and easy to implement(Accepted by T.N.E.B officials). It includes four sections – transmitting,
receiving, counter display and processing sections.
DESCRIPTION OF OUR IMPLEMENTATION IDEAS:
The disc revolutions are sensed into pulses by optical slot sensor.
These pulses are shaped and given as control signal to the CMOS switch which by passes carrier wave generated by PLL provides as input to receiving section where transmitted signal is selected by the Intermediate frequency transformer. For each lock a pulse is sent out. The counter section is designed to send out pulse for every six input pulse from the receiver section. This count is parallely distributed
in a 7-segmentdisplay and then to μc for further processing. μc performs the function of indication and identification. Pindetails, features, connections and software employed for μc89c51 are described in detail.
We believe our implementation ideas is a boon to the electricity
board offering them a chance to detect accurately the location and amount of power theft. Logical view for a digital meter is also included in our presentation.
INTRODUCTION:
Electricity is the modern man’s most convenient and useful form of
energy without which the present social infrastructure would not be feasible. The increase in per capita production is the reflection of the increase in the living standard of people. When importance of electricity is on the increasing side, then how much should theft of this energy or illegal consumption of power from the transmission lines be averted? Power theft has become a great challenge to the electricity board. The dailies report that Electricity Board suffers a total loss of 8 % in revenue due to power theft every year, which has to controlled. Our paper
identifies the Power theft and indicates it to the Electricity board through Power line. We had also dealt about the remote monitoring of an energy meter.
MICROCONTROLLER BASED AUTOMATION:
Embedded systems - a combination of software, hardware and
additional mechanical parts that together forms a component of a larger system, to perform a specific function. It’s a technology, characterized by high reliability, restricted memory footprint and real time operation associated with a narrowly defined group of functions. Automation has made the art of living comfortable and easy. Embedded systems have made the process of automation a most successful one. Here, we have focused on automotive, an area of embedded controllers, in
which we have dealt with the Power theft identification and also about the remote monitoring of an energy meter. The microcontroller chip is preprogrammed to perform a dedicated or a narrow range of functions as a part of a larger system, usually with minimal end user or operator intervention. Our paper throws light on automated monitoring of theft
identification, which is an application of embedded controllers
MODES OF THEFT:
It has been seen that there are 4 common methods of power
theft as given below :-
Bogus seals and tampering of seals.
Meter tampering, meter tilting, meter interface and
meter bypassing.Changing connection.
Direct tapping from line.
Due to introduction of modern electronic metering equipments, power
thieves are utilizing more technological methods. Recent cases of power theftdiscovered by British inspectors included customers tunneling out to roadsidemains cables and splicing into the supply, a garage taking its night time powersupply from the nearest lamp post and domestic customers drilling holes intometer boxes and attempting to stop the counter wheels from turning. Anothermethod of Power theft is by keeping a strong magnet in front of the disc inthe energy meter and thus arresting the rotation of the disc, connecting the loaddirectly to the power line bypassing the energy meter. But, it can be avoided
easily by providing a non magnetic enclosure.
Posts: 1
Threads: 0
Joined: Feb 2011
could anyone help me giving a detailed report of energy theft meter...
Posts: 5
Threads: 0
Joined: Feb 2011
pls send me the details of this project i want it pls thier is no time pls
Posts: 5
Threads: 0
Joined: Feb 2011
pls send me the full details pls im waiting their is no time our HOD rejected our project so need to start frm 1st pls send it to vmanjunathroy2008[at]gmail.com
Posts: 1,080
Threads: 0
Joined: Apr 2011
Posts: 2,481
Threads: 1,434
Joined: Mar 2010
Posts: 6,566
Threads: 1,107
Joined: Jul 2011
Posts: 6,566
Threads: 1,107
Joined: Jul 2011
Posts: 1
Threads: 0
Joined: Jan 2012
Hello
Can I get the detail idea of the 'controller based power theft identifier'??
Posts: 6,566
Threads: 1,107
Joined: Jul 2011
Posts: 4,190
Threads: 817
Joined: Feb 2012
sir ,i want to do some single phase theft prevention ,this is my final year project please hellp me about this project.
give me ans on saeedj551[at]gmail.com.thanks a lot.
plz send me full information about the microcontroller
sir i want full information about microcontroller in pdf form
please send me full information about the 'power theft identification using microcontroller' in pdf form
Posts: 7,939
Threads: 421
Joined: Jun 2012
please give me its circuit diagrams.
with touch sensitive and light sensitive.
:)
Posts: 4,577
Threads: 25
Joined: Mar 2013
To get full information or details of Micro Controller based Power Theft Identifier please have a look on the pages
http://studentbank.in/report-micro-contr...identifier
http://studentbank.in/report-microcontro...nar-report
http://studentbank.in/report-microcontro...ion?page=2
http://studentbank.in/report-microcontro...tification
http://studentbank.in/report-microcontro...f-download
if you again feel trouble on Micro Controller based Power Theft Identifier please reply in that page and ask specific fields in Micro Controller based Power Theft Identifier
