Hi..we need some schematic diagram of home appliance turbine,,the working and the process also ...

The appliance turbine is used to generate electrical energy from compressed air. The main parts in this project are Cylinder with compressed air, Rotary blades, Gear and wheel configuration, Coil and permanent magnet and Inversion circuit.
The compressed air falls on the pallets with high pressure. Thus, the blades of the turbine rotate with constant speed.
The gear configuration can be adjusted to control the speed of the fly wheel. A magnet is connected to the gear. The magnet will turn when the flywheel is turned.
The coil is fixed around the magnet. When the flywheel is rotated, the drive gear is rotated by one cycle and there by the driving gear is rotated 50 times.
According to Faraday's law, "as long as there is a change in the magnetic flux bound to the coil, an emf is induced." Therefore, in each rotation, electricity is generated. This electricity is stored in a rechargeable battery.
The battery is connected to the Inverter card. The inverter supplies the electric power in case of power failures. Therefore, there is an alternative flow of electricity.
Since this does not use fuel, this is very cheap and better