i need ppt on drive by wire system ...coz i ve ma presention in next comin week...so it ll be very helpfull if u collect n give in short tym.... ....etc

[:=Read Full Message Here=:]

Chemical Mechanical Planarization (CMP) is an important process in semiconductor chip fabrication. In the CMP process, excess material is removed and the surface is planarized by the action of chemical and mechanical forces. Shallow Trench Isolation (STI) has become a key technology for device isolation in recent times. In this method, a shallow trench is made on the silicon wafer between active devices, silicon dioxide is deposited over the trench as well as the active area and the excess silicon dioxide is removed by CMP. The oxide remaining ....etc

[:=Read Full Message Here=:]

Finite-Element Simulation of Electrical Discharge Machining (EDM) Process


I. INTRODUCTION
Electric discharge machining (EDM), sometimes
colloquially also referred to as spark machining, spark
eroding, burning, die sinking or wire erosion, is a
manufacturing process whereby a desired shape is obtained
using electrical discharges (sparks). Material is removed
from the workpiece by a series of rapidly recurring current
discharges between two electrodes, se ....etc

[:=Read Full Message Here=:]

presented by:
A.Thillaivanan
P.Asokan
R.Saravanan
K.N.Srinivasan


CUTTING PARAMETERS OPTIMIZATION FOR THE WIRE EDM PROCESS USING CONTINUOUS ANTS COLONY ALGORITHM (CACO)
ABSTRACT:
Optimization of operating parameters is an important step in machining, particularly for operating unconventional machining procedure like Wire EDM .The economy of machining mainly depends on the machining parameters. Optimization of machining parameters is an important step and has been dealt by many researchers. In this paper ....etc

[:=Read Full Message Here=:]

SYNOPSIS
Wire Electric Discharge Machining(WEDM) is one of the most important non-traditional machining process.Taguchi method is supplemented with various supportive techniques such as fuzzy logic, grey-relational analysis,two-phase parameter design, artificial neural network(ANN) and various combination methods to incorporate material removal rate(MRR) and surface roughness(SR)simultaneously .Particle Swarm Optimization(PSO)& Memetic Algorithm(MA) based optimization procedures have been developed to o ....etc

[:=Read Full Message Here=:]

plaese me a cnc wire cut machine ppt for my college presentation ....etc

[:=Read Full Message Here=:]

Kindly explain me.... For the above question ... ....etc

[:=Read Full Message Here=:]

SIR I WANT TO BE DOWNLOAD PPT OF ELETRIC DISCHARGE MACHINING PROCESS HOW CAN IT BE DOWNLOAD A GOOD PPT ....etc

[:=Read Full Message Here=:]

A mathematical model to choose effective cutting parameters in electroerosion, EDM



introduction

Machining by electroerosion experienced a significant development during the last decades when several problems were caused following the metallographic and mechanical change of the machined surface. Several research tasks are interested in the study of optimization and the improvement of the various performances of machining by electroerosion in order to improve the productivity ....etc

[:=Read Full Message Here=:]

i want to calculate MRR and diameter accuracy (least dimension that should be machined in WEDM) given inputs are current, voltage, speed, wire feed,spark gap etc.,i want to predict equation for this problem. please give me a solution. ....etc

[:=Read Full Message Here=:]