PRESENTED BY
R. RADHIKA
B. USHA RANI


ABSTRACT
Permanent magnet synchronous motor (PMSM) has been widely used in high performance drive applications for its advantages such as compactness, high efficiency, reliability and suitability to environment. Due to its high power density and smaller size, PMSM has evolved as the preferred solution for speed and position control drives on machine tools and robots. A Permanent Magnet Synchronous Motor (PMSM) is a motor that uses permanent magnets to produce the air g ....etc

[:=Read Full Message Here=:]

Kindly send me the paper titiled VECTOR CONTROL DRIVE OF PERMANENT MAGNET SYNCHRONOUS MOTOR USING MATLAB/SIMULINK to understand the modelling and contrrol of PMSM.

Thanks and Regards,
Hajmunnisa.T


....etc

[:=Read Full Message Here=:]

Abstract:
During a long time, permanent magnet synchronous motor (PMSM) were only reserved for some
specific applications, however, recently, these machines are becoming more used due to the powerful magnetic
characteristic of the rare earth, being used in different areas. Recently several researchers have proposed
implementations combining the use of permanent magnet synchronous motor with the direct torque control (DTC)
technique offering a quick and precise control. The present work combines these techniques and it proposes th ....etc

[:=Read Full Message Here=:]

Control Dynamics of a Doubly Fed Induction Generator Under Sub- and Super-Synchronous Modes of Operation


M. Aktarujjaman, Student Member,
IEEE, M.E. Haque, Member, IEEE, K. M. Muttaqi, Senior
Member, IEEE, M. Negnevitsky, Member,
IEEE and G. Ledwich, Senior Member, IEEE


Abstract-
Abstract—
Depending on wind speed, a doubly fed induction generator (DFIG) based variable speed wind turbine is capable of operating in sub- or super-synchronous mode of operation using a back to back PWM co ....etc

[:=Read Full Message Here=:]

Abstract
This paper introduces a sensorless nonlinear control
scheme for controlling the speed of a permanent magnet
synchronous motor (PMSM) driving an unknown load torque.
The states of the motor and disturbance torque are estimated via
an extended nonlinear observer avoiding the use of mechanical
sensors. The control strategy is an exact feedback linearization
law, with trajectory tracking evaluated on estimated values
of the PMSM states and the disturbance torque. The system
performance is evaluated by simulations.
I. I ....etc

[:=Read Full Message Here=:]

Keywords
Electro-dynamic Suspension (EDS), Urban MagLev, Linear Synchronous Motor (LSM), Permanent
Magnet (PM), Pulse Width Modulation (PWM)
Abstract
A new concept in Urban Maglev transportation design is in the testing phase. The vehicle uses
permanent magnets (PM) for both the electro-dynamic suspension (EDS) and linear synchronous
motor (LSM) propulsion. Because of the 3D coupled non-linear velocity-dependent magnetic
levitation, the LSM must provide stabilizing forces to the vehicle. To do this, Vector Control is used
....etc

[:=Read Full Message Here=:]

SPEED CONTROL OF SYNCHRONOUS MOTOR BY USING VARIABLE FREQUENCY DRIVES



ABSTRACT :

A novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency is presented. The control scheme is based on the popular constant volts per hertz (V/f) method using low-cost open-loop current sensors. Only stator current measurements are needed to compensate for both stator resista ....etc

[:=Read Full Message Here=:]

Abstract
This paper present a speed control technique for effectively meeting the motion control objective which is
a permanent magnet synchronous motor (PMSM) based on an embedded inside current tracking objectives. The tracking
adaptive backstepping technique. The proposed stabilizing controllers described in this paper fall into the category of a
feedback law for the PMSM is shown to be globally full state-feedback controller with system uncertainty. In this
asymptotically stable in the context of Lyapunov theory. It takes sch ....etc

[:=Read Full Message Here=:]

SPEED CONTROL OF SYNCHRONOUS MOTOR BY USING VARIABLE FREQUENCY DRIVES



ABSTRACT :

A novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency is presented. The control scheme is based on the popular constant volts per hertz (V/f) method using low-cost open-loop current sensors. Only stator current measurements are needed to compensate for both stator resistance d ....etc

[:=Read Full Message Here=:]

AIM:-
To study the construction, working principle and performance characteristics of Synchronous Induction Motor.
APPARATUS REQUIRED:-
3 Phase Synchronous Induction Motor with loading arrangement
Auto Induction Starter panel – 1
TPDT knife switch - 1
Tachometer - 1
THEORY:-
In the applications where high starting torque and constant speed are desired then synchronous induction motor can be used. It has the advantages of both synchronous motor ....etc

[:=Read Full Message Here=:]