WAN BASED CONTROL OF SINGLE PHASE INDUCTION MOTOR AND MONITORING
ABSTRACT
To provide a system for controlling single phase induction machines using wireless sensor networks
To avoid unexpected equipment failures and obtain higher accuracy in diagnostic and prognostic for the health condition of a motor, efficient and comprehensive data collecting, monitoring, and control play an important role to improve the system more reliable and effective.
A novel wireless data collection for health monitoring system of elect ....etc

[:=Read Full Message Here=:]

Modeling and Simulation of Speed of a Doubly Fed Induction Motor with Different Regulators
Many industrial applications require new control techniques in order to obtain fast response and to improve the dynamic performances. One of the techniques users, sliding mode,fuzzy logic and fuzzy sliding mode control which are characterizes by robustness and insensitivity to the parameters variation. In this paper, we present a comparative study of a direct stator flux orientation control of doubly fed induction motor ....etc

[:=Read Full Message Here=:]

AIM:
To conduct the no load & blocked rotor test on 3- phase induction motor
& to draw the equivalent circuit of 3- phase squirrel cage induction motor.
FUSE RATING :-
125/100 * 7.5 A ≈ 10A
THEORY :-
A 3-phase induction motor consists of stator, rotor & other associated parts. In the stator
,a 3- phase winding (provided) are displaced in space by 120. A3- phase current is fed to the winding so that a resultant rotating magnetic flux is generated. The rotor starts rotat ....etc

[:=Read Full Message Here=:]

sir i want a a seminar ppt on automatic motor starters. ....etc

[:=Read Full Message Here=:]

AIM:
To study and connect
(1) Direct Online Starter
(2) Auto transformer Starter
(3) Star Delta Starter
(4) Rotor Resistance Starter
APPARATUS REQUIRED:
SL.NO NAME OF APPARATUS QUANTITY
1. DOL Starter 1 No.
2. Auto transformer Starter 1 No.
3. Star Delta Starter 1 No.
4. Rotor Resistance Starter 1 No.
THEORY:
NECESSITY OF STARTERS:
An induction motor is similar to a secondary short circuit three phase transformer so if normal voltage is applied to the motor it takes 5 to 6 times of nor ....etc

[:=Read Full Message Here=:]

AIM:-
To study the construction, working principle and performance characteristics of Synchronous Induction Motor.
APPARATUS REQUIRED:-
3 Phase Synchronous Induction Motor with loading arrangement
Auto Induction Starter panel – 1
TPDT knife switch - 1
Tachometer - 1
THEORY:-
In the applications where high starting torque and constant speed are desired then synchronous induction motor can be used. It has the advantages of both synchronous motor ....etc

[:=Read Full Message Here=:]

hello =).. i am electrical engineering student from Malaysia..my final year project title is about comparative study of induction motor.. need some help on how to prepare the thesis..if possible ,i want previous full project report for this title..any kind of reply will be helpful..ok..thanks everybody =) ....etc

[:=Read Full Message Here=:]

Abstract
In this paper, a sensorless induction motorparameter identification is presented. Sensorless control employsa variety of estimators and observers of motor speed, torque andfluxes, and accurate information about motor parameters iscrucial to obtain a high performance control. The parameters ofthe induction motor equivalent circuit are obtained by means ofDC an AC tests using the voltage-source inverter. When theseparameters are estimated a closed loop flux estimator and an openloop speed estimator are implemented to determine ....etc

[:=Read Full Message Here=:]

AIM:
To conduct the No Load test and Blocked rotor test on three phase squirrel cage induction motor and to draw the equivalent circuit.
FUSE RATING:
No load: 10% of rated current (Full load current)
Load: 125%of rated current (Full load current)
APPARATUS REQUIRED:
PRECAUTIONS:
The autotransformer should be kept at minimum voltage position.
PROCEDURE:
Note down the name plate details of motor.
1. For no-load open circuit test by adjusting autotransform ....etc

[:=Read Full Message Here=:]

hello =).. i am electrical engineering student from Malaysia..my final year project title is about comparative study of induction motor.. need some help on how to prepare the thesis..if possible ,i want previous full project report for this title..any kind of reply will be helpful..ok..thanks everybody =) ....etc

[:=Read Full Message Here=:]