Vaccum Brake System
The vacuum brake is a braking system employed on trains and introduced
in the mid-1860s. A variant, the automatic vacuum brake system, became
almost universal in British train equipment and in those countries influenced
by British practice. Vacuum brakes also enjoyed a brief period of adoption
in the USA, primarily on narrow gauge railroads. However, its limitations
caused it to be progressively superseded by compressed air systems starting
in the United Kingdom from the 1970s onward. The vacuum brake system is ....etc

[:=Read Full Message Here=:]

AUTOMATIC TEMPERATURE CONTROL IN VACUUM BRAZING FURNACE USING P.L.C

ABSTRACT
The main objective of this project is to maintain & control temperature uniformly of the two zones in vacuum brazing furnace and braze similar or dissimilar components using certain chemicals, for the given specifications of a job
Brazing alloys used for brazing the components of gas turbines and aerospace applications contain nickel as the base material. Nickel has highest affinity for oxygen. Incase if components are brazed using nickel ....etc

[:=Read Full Message Here=:]

ABSTRACT
Recent advances in dependable embedded system technology as well as continuing for improved handling and passive and active safety improvement, have led vehicle manufactures and suppliers to actively pursue development programme in computer controlled by wire system. These subsystems include steer and brake by wire and are composed of mechanically developed sets of actuators and controllers connected through multiplexed, in making computer network.
Electromechanical brake by wire systems realize on electronic cont ....etc

[:=Read Full Message Here=:]

ABSTRACT
Sensotronic Brake Control (SBC„¢) works electronically, and thus faster
and more precisely, than a conventional hydraulic braking system. As
soon as you press the brake pedal and the sensors identify the driving
situation in hand, the computer makes an exact calculation of the brake
force necessary and distributes it between the wheels as required. This
allows SBC„¢ to critically reduce stopping distances. SBC„¢ ....etc

[:=Read Full Message Here=:]

EDDY CURRENT BRAKES

EDDY CURRENT:
It is a swirling current set up in a conductor in response to a changing magnetic field.
By Lenz's law, the current swirls in such a way as to create a magnetic field opposing the change

Eddy Current Brakes
It slow an object by creating eddy currents through emi which create resistance, and in turn either heat or electricity.
Braking action is made by varying the strength of the magnetic field.
¢ A braking force is possible when electric current is passed ....etc

[:=Read Full Message Here=:]

SYSTEM DESIGN & DEVOLOPEMENT IN CALCULATION OF RESPONSE TIME FOR AIR BRAKE SYSTEM
INTRODUCTION
COMPONENTS OF AN AIR BRAKE SYSTEM:
Air brake system consists of the following components:
Compressor:
The compressor generates the compressed air for the whole system.
Reservoir:
The compressed air from the compressor is stored in the reservoir.
Unloader Valve:
This maintains pressure in the reservoir at 8bar.When the pressure goes above 8 bar it immediately releases the pressurized air to bring the system to 8-bar press ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Steam ejectors are designed to convert the pressure energy of a motivating fluid to velocity energy to entrain suction fluid and then to recompress the mixed fluids by converting velocity energy back into pressure energy. This is based on the theory that a properly designed nozzle followed by a properly designed throat or venturi will economically make use of high pressure fluid to compress from a low pressure region to a higher pressure. This change from pressure head to velocity head is the basis of th ....etc

[:=Read Full Message Here=:]

INTRODUCTION

Brake assist senses emergency braking by detecting the speed at which the driver presses the brake pedal and immediately applying all available power boosts .brake assistance can potentially reduce overall stopping distance by eliminating the delay caused by a common human tendency of braking hard enough or soon enough.

HISTORY

Mercedes originally invented this system in the 1990â„¢s to shorten emergency stopping distances takes over if a driver applies the brake ....etc

[:=Read Full Message Here=:]

i want the project on 'hydraulic brake on car brake system '
this is my seminar topic so suggest me where i get the report on above topic. so please give page link or suggestion. ....etc

[:=Read Full Message Here=:]

Hydraulic Brake System
The Hydraulic brake system is a braking system which uses brake fluid usually includes ethylene glycol, to transmit pressure from the controlling unit, which is usually near the driver, to the actual brake mechanism, which is near the wheel of the vehicle.
The most common arrangement of hydraulic brakes for passenger vehicles, motorcycles, scooters, and mopeds, consists of the following
¢ Brake pedal or Brake lever
¢ Pushrod, also called an actuating rod
¢ Reinforced hydraulic lines
¢ Rotor or a brake di ....etc

[:=Read Full Message Here=:]