Hello,

Presently I am using forging for manufacturing cam shaft.

The yield I am achieving 60%.To improve the yield to 75 % do you have any alternate process please provide.

Material : Low Carbon Steel.

Application : Used in Fuel Injection Pump operates at 1500 Rpm and Higher load. ....etc

[:=Read Full Message Here=:]

used 2006 toyota tacoma 4x4

Four different styles of daytime running lights exist. These include low-beam headlights, dimmed high beams, steady burning lights and dedicated DRLs. European countries tend to lean towards the usage of the low-beam headlights that stay on consistently once the car engine is running. Scandinavian countries were the first to implement the dedicated daytime running lights which work differently from the steady burn lights which run constantly without a manual switch. The dedicated DRLs work independe ....etc

[:=Read Full Message Here=:]

toyota 3s-ge dual vvti engine crnk and cam wheels timing diagram ....etc

[:=Read Full Message Here=:]

Submitted By
Shivek dhar


ABSTRACT
Gone through a rigorous four weeks training under the guidance of capable engineers and workers of bajaj motors limited, headed by the executive director of the company Mr. J.C Jha in the machining plant situated in Narsinghpur, Gurgaon, Haryana.
The training was specified under the CAMSHAFT department of the machining unit. Working under the cam machining department the basic grinding, scaling and machining was shown on heavy to medium duty lathes planted in the same ....etc

[:=Read Full Message Here=:]

The Toyota Production System



1 Historical View
2 Performance measures
3 Elements of TPS
4 Six Eras of Manufacturing Practice
5 Difficulties with Implementation

J T. Black –1, 2

1. Form Cells
Sequential operations, decouple operator from machine, parts in families, single piece flow within cell


2. Reduce Setup
Externalize setup to reduce down-time during changeover, increases flexibility


J T. Black – 3, 4

....etc

[:=Read Full Message Here=:]

CASE: I Toyota

Of all the slogans kicked around Toyota, the key one is kaizen, which means “continuous improvement” in Japanese. While many other companies strive for dramatic breakthrough, Toyota overtook Ford Motor Company to become the second largest automaker in the world. Ford had been the second largest since 1931.
Toyota simply is tops in quality, production, and efficiency. From its factories pour a wide range of cars, built with unequaled precision. Toyota turns out luxury sedans with Mercedes-Benz-like quality using o ....etc

[:=Read Full Message Here=:]

OVERHEAD CAMSHAFT ENGINE
* INTRODUCTION :-
OHV means OverHead Valve –
An engine design where the camshaft is installed inside the engine block and valves are operated through lifters, pushrods and rocker arms (an OHV engine also known as Pushrod engine).
Although an OHV design is a bit outdated, it has been successfully used for decades. An OHV engine is very simple, has more compact size and proven to be durable.
* Classification :-
Single OverHead Cam
Double OverHead Cam
Pushrod Engines
* Single O ....etc

[:=Read Full Message Here=:]

Camshaft


Double overhead cams control the opening and closing of the valves
The camshaft is used in IC Engines to operate poppet valves. It consists of a cylindrical rod running the length of the cylinder bank with a number of oblong lobes or cams protruding from it, one for each valve. The cams force the valves open by pressing on the valve, or on some intermediate mechanism, as they rotate.
The relationship between the rotation o ....etc

[:=Read Full Message Here=:]

Just-in-Time in practice at Toyota: Rules-in-Use for building self-diagnostic, adaptive work-systems



INTRODUCTION
In reaction to a race to ‘best practice’ -- as reflected in initiatives such as TQM, JIT, re-engineering, and ‘lean manufacturing’ -- Hayes and Pisano (1994) encouraged managers to re-focus on achieving strategic fit by configuring production systems ‘through a series of interrelated and internally consistent choices th ....etc

[:=Read Full Message Here=:]

Altezza camshafts reassembling and timing ....etc

[:=Read Full Message Here=:]