Space Robotics

Introduction
Robot is a system with a mechanical body, using computer as its brain. Integrating the sensors and actuators built into the mechanical body, the motions are realised with the computer software to execute the desired task. Robots are more flexible in terms of ability to perform new tasks or to carry out complex sequence of motion than other categories of automated manufacturing equipment. Today there is lot of interest in this field and a separate branch of technology ' ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining

Introduction
The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.

CLASSIFICATION
1. Contact initiated dischar ....etc

[:=Read Full Message Here=:]

Definition

The term Cryogenics originates from Greek word which means creation or production by means of cold. As prices for energy and raw materials rise and concern for the environment makes safe waste disposal difficult and Costly, resource recovery becomes a vital matter for today's business. Cryogenic grinding technology can efficiently grind most tough materials and can also facilitate Cryogenic recycling of tough composite materials and multi component scrap. The heart of this technology is the CRYO-GRIND SYSTEM. It employs a cryoge ....etc

[:=Read Full Message Here=:]

INTRODUCTION


For the power generation with 2x110 MW and 3x210 MW of K.T.P.S. authorities are required to be operative to active full operation. The auxiliaries are basically operation either on L.T. System i.e. 415 V 3 ? power supply is made available to the system after providing the station transformer of 3x50 MVA capacity with voltage 220 KV/ 7.2/7.2 KV & different service transformers of capacity 1.0 MVA , 1.5 MVA , 2.0 MVA , which are located near the load centre as the transformer having the voltage of 6.6 KV /415 V. The 6.6 KV pow ....etc

[:=Read Full Message Here=:]

Moulds in Casting of Plastics and Thermoforming


Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin.
Plastic tooling offers several advantages over conventional metal tooling. These includes:


1. Lowest ....etc

[:=Read Full Message Here=:]

Introduction

Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin.
Plastic tooling offers several advantages over conventional metal tooling. These includes:


1. Lowest cost
2. Less time.
3. Light weig ....etc

[:=Read Full Message Here=:]

Needed cryogenics notes and study material for 7th sem mechanical engineering ....etc

[:=Read Full Message Here=:]

ABSTRACT
Cryogenic grinding permits heat-sensitive, thermoplastic, and elastic materials to be economically ground to very small particle sizes. The cryogenic process actually embrittle a material prior to size reduction and controls heat buildup in the grinding equipment. The result is high product quality and system productivity.
Cryogenic grinding involves cooling a material below its embitterment temperature with a cryogenic fluid, typically liquid nitrogen or, in certain applications, carbon dioxide. Af ....etc

[:=Read Full Message Here=:]

Space Robotics

Introduction
Robot is a system with a mechanical body, using computer as its brain. Integrating the sensors and actuators built into the mechanical body, the motions are realised with the computer software to execute the desired task. Robots are more flexible in terms of ability to perform new tasks or to carry out complex sequence of motion than other categories of automated manufacturing equipment. Today there is lot of interest in this field and a separate branch of technology ' ....etc

[:=Read Full Message Here=:]

Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin. Plastic tooling offers several advantages over conventional metal tooling. These includes:

1. Lowest cost

2. Less time.

3. Light weight, easily handled ....etc

[:=Read Full Message Here=:]

I plan to establish Plastic, Paper & Thermocol base Disposable Glass, Cup & Plates etc (all table items) please provide me List of Machine & Raw Material suppliers to establish the same and provide me Details Project report for the same ....etc

[:=Read Full Message Here=:]

ABSTRACT
Cryogenic grinding permits heat-sensitive, thermoplastic, and elastic materials to be economically ground to very small particle sizes. The cryogenic process actually embrittle a material prior to size reduction and controls heat buildup in the grinding equipment. The result is high product quality and system productivity.
Cryogenic grinding involves cooling a material below its embitterment temperature with a cryogenic fluid, typically liquid nitrogen or, in certain applications, carbon dioxide. Af ....etc

[:=Read Full Message Here=:]

Electro Discharge Machining

Introduction
The unconventional method of several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new recording in the manufacturing technology. EDM is one such machining process, which has been immense help to the manufacturing process engineers to produce intricate shapes on any conducting metal and alloy irrespective of its hardness and toughness.

CLASSIFICATION
1. Contact initiated dischar ....etc

[:=Read Full Message Here=:]