gating and rising system design on casting ....etc

[:=Read Full Message Here=:]

Most metal parts are manufactured by either fully-liquid (e.g., casting) or fully-solid (e.g., forging) processes. Semi-Solid Metalworking (SSM) incorporates elements of both casting and forging for the manufacture of near-net-shape discrete parts. Applications are fuel rails, suspension arms, engine brackets, steering Knuckles,rear axle components and motor cycle upper fork plates.



SSM casting was selected for each of these applications for different reasons - high integrity, pressure tightness and design simplification. In eac ....etc

[:=Read Full Message Here=:]

The rapid development of multimedia applications and the Internet has led to the demand of mobility for these services. New wireless standards support high data rates and additional services, but they require complex realizations in both front-end and base band of a mobile system. The obtainable performance of such a system is often limited by the power consumption of the implementation, as long stand-by and talk times are still key parameters of a mobile terminal. Also the thermal problem, given by insufficient heat removal with highly integ ....etc

[:=Read Full Message Here=:]

Plz make me available all texts regarding clock gating.I need this for my m.tech thesis. ....etc

[:=Read Full Message Here=:]

The rapid development of multimedia applications and the Internet has led to the demand of mobility for these services. New wireless standards support high data rates and additional services, but they require complex realizations in both front-end and base band of a mobile system. The obtainable performance of such a system is often limited by the power consumption of the implementation, as long stand-by and talk times are still key parameters of a mobile terminal. Also the thermal problem, given by insufficient heat removal with highly integra ....etc

[:=Read Full Message Here=:]

I want 2 make.. Geting system.. Plz give me such advice ....etc

[:=Read Full Message Here=:]

Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin. Plastic tooling offers several advantages over conventional metal tooling. These includes:

1. Lowest cost

2. Less time.

3. Light weight, easily handled ....etc

[:=Read Full Message Here=:]

Ultra Low-Power Clocking Scheme Using Energy Recovery and Clock Gating

Hamid Mahmoodi, Member, IEEE, Vishy Tirumalashetty, Matthew Cooke, and Kaushik Roy, Fellow, IEEE


Abstract—
A significant fraction of the total power in highly synchronous systems is dissipated over clock networks. Hence, low power clocking schemes are promising approaches for low-power design. We propose four novel energy recovery clocked flip-flops that enable energy recovery from the clock network, resulting in significant en ....etc

[:=Read Full Message Here=:]

ABSTRACT
As power consumption of the clock tree in modern VLSI designs
tends to dominate, measures must be taken to keep it
under control. This paper introduces an approach for reducing
clock power based on clock gating. We present a methodology
that, starting from an RTL description, automatically
generates a set of constraints for driving the construction of
the clock tree by the clock synthesis tool. The methodology
has been fully integrated into an industry-strength design
flow, based on Synopsys DesignCompiler (front-end) ....etc

[:=Read Full Message Here=:]

Introduction

Plastics today are larger serving as substitute material in the field of tooling and prototype parts but are being used as engineering materials in their own lights and in many applications, they are doing better job then any other material could do, some authorities claim that the rapid advancement of plastic tooling would have been impossible without the versatility of the epoxyresin.
Plastic tooling offers several advantages over conventional metal tooling. These includes:


1. Lowest cost
2. Less time.
3. Light weig ....etc

[:=Read Full Message Here=:]