Abrasive machining and process parameters ....etc

[:=Read Full Message Here=:]

optimising free space optics for wireless networks seminar report and slide needed some one please help
some good electrical project reports are also welcomed ....etc

[:=Read Full Message Here=:]

Guideline for Aluminum Alloy Conductors for Distribution Feeder Applications with Recommendations for Connections



A Distribution Feeder Installation
1 Distribution feeder conductors in sizes #6 AWG to 1000 kcmil may be copper
or aluminum conductor material (ACM).
i. Aluminum alloy conductors shall be compact stranded conductors of
NUAL® (AA-8030) as manufactured by Alcan Cable or of a recognized
8000 Series aluminum alloy conductor material by the Alum ....etc

[:=Read Full Message Here=:]

K.J.V. ALLOY CONDUCTORS PVT. LTD.



COMPANY PROFILE :
We started our operations with manufacturing AAC (All Aluminium Conductor), ACSR (Aluminium Conductor Steel Reinforced), Bare Aluminum Wire & Strips, Bare Aluminum Alloy Wire, in theyear 1989. Subsequently we included AAAC (All Aluminium Alloy Conductor) & Paper Covered (Insulated) Wire & Strips to our product mix for distribution & transmission power lines .

SUPPLIES TO :
....etc

[:=Read Full Message Here=:]

ABSTRACT:
Conventional closed die forging, is widely used for manufacture of superalloy parts. Despite recent technological advancements in the area of forging design, empirical and trial-and-error methods are still widely used in forging super alloy materials. This paper investigates the effect of flash thickness and various geometrical forging design parameters including internal and external drafts and internal and external corner radii, on the die cavity filling, forging load and raw material cost when forging Nimonic80-A a supera ....etc

[:=Read Full Message Here=:]

synopsis for optimising the machining parameters of alloy steel
synopsis for optimising the machining parameters of alloy steel ....etc

[:=Read Full Message Here=:]

details of synopsis on machine parameters for alloy steel. ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

Abrasive Jet Machine

Introduction
Abrasive jet machining (AJM) is a non-traditional machining
process that can machine material without generating heat and
shock.
Abrasive jet machining (AJM) is commonly used for Cutting,
Cleaning, Drilling and Etching operation

Mechanism of AJM

Fine particles are accelerated in
gas stream .


The particles are directed towards
the focus of machining.

As the particle impacts the surface,
....etc

[:=Read Full Message Here=:]

Abstract
Conditions were determined for consistent coupling of a CO2 laser beam to weld 5182 aluminum
alloy sheet. Full penetration butt and bead-on-plate welds on 0.8 and 1.8 mm sheets were
performed. Process conditions examined included beam mode, spot size and irradiance,
shielding gas flow, and edge quality and fitup. The observed weld quality variations with the
different process parameters were consistent with physical phenomena and a threshold irradiance
model. Optimal conditions were determined for obtaining consistent wel ....etc

[:=Read Full Message Here=:]