Guideline for Aluminum Alloy Conductors for Distribution Feeder Applications with Recommendations for Connections



A Distribution Feeder Installation
1 Distribution feeder conductors in sizes #6 AWG to 1000 kcmil may be copper
or aluminum conductor material (ACM).
i. Aluminum alloy conductors shall be compact stranded conductors of
NUAL® (AA-8030) as manufactured by Alcan Cable or of a recognized
8000 Series aluminum alloy conductor material by the Alum ....etc

[:=Read Full Message Here=:]

please send ppt and full report on Morphing Aircraft Technology & New Shapes For Aircraft Design ... i have seminar on wednesday .. please ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

Morphing Aircraft Technology
&
New Shapes For Aircraft Design
V.Vikram
S6 Department of Mechanical Engineering
Mohandas college of Engineering and Technology



Abstract
Morphing aircraft are multi-role aircraft that change their external shape substantially to adapt to a changing
mission environment during flight.2 This creates superior system capabilities not possible without morphing shape
changes. The objective of morphing activities is to develop hig ....etc

[:=Read Full Message Here=:]

Abstract
Conditions were determined for consistent coupling of a CO2 laser beam to weld 5182 aluminum
alloy sheet. Full penetration butt and bead-on-plate welds on 0.8 and 1.8 mm sheets were
performed. Process conditions examined included beam mode, spot size and irradiance,
shielding gas flow, and edge quality and fitup. The observed weld quality variations with the
different process parameters were consistent with physical phenomena and a threshold irradiance
model. Optimal conditions were determined for obtaining consistent wel ....etc

[:=Read Full Message Here=:]

Methods of Aluminum Welding

Aluminum Welding Techniques

MIG Welding (Metal Inert Gas)- supplies power to wire fed through the center of gas cone, heat and filler are the same.
TIG Welding (Tungsten Inert Gas) or Heliarc – seperates the heat source from the filler material.

MIG Welding

Shield gas is 100% Argon
Faster than regular steel MIG welding, due to the higher thermal conductivity
Material must be very clean for effective weld
Good for long runs and heavy material

TIG Welding[ ....etc

[:=Read Full Message Here=:]

I wish mechanical properties and micro structure of Aluminium-Copper and SiC metal matrix composites produced by stir casting technique. In which compositions is 3.5-5 %Copper, 5% SiC and rest aluminium.

Also I commercial series name of aluminium alloy in which 3.5-5% copper is there. ....etc

[:=Read Full Message Here=:]

SOLID ALUMINUM ALLOYS: A HIGH ENERGY DENSITY MATERIAL FOR SAFE ENERGY STORAGE, TRANSPORT, AND SPLITTING WATER TO MAKE HYDROGEN ON DEMAND
Outline
• Energy density and technology sustainability
• Brief history and technology overview
• What else we know about it
• Process flow and hydrogen delivery control
• Markets and applications
Energy density and technology sustainability
As hydrogen from splitting water:
• 1 Kg H2: 142 MJ = 39.4 kW-Hrs combustible energy
• 1 Kg Al* makes ....etc

[:=Read Full Message Here=:]

Aluminum Electrolytic Capacitors

Aluminium electrolytic capacitors are widely used in power supply circuitry of electronic equipment as there after several advantages over other types of capacitances. The selection of a capacitor for an application without knowing the basics may result in unreliable performance of the equipment due to expanitor problems. It may lead to customer dissatisfaction and damage market to potential or the image of a reputed company. The aluminium eletrolytic capacitors are suitable to be used when a great capacitanc ....etc

[:=Read Full Message Here=:]

SLIVER GENERATION REDUCTION IN TRIMMING OF ALUMINUM
Seminar
Presented by
VIVEK ASHWIN
DEPARTMENT OF MECHANICAL ENGINEERING
N S S COLLEGE OF ENGINEERING
PALAKKAD-678008, KERALA.

SYNOPSIS

Aluminum auto body sheets produce appreciable amounts of slivers during trimming operations when trimmed with dies conventionally designed for steel sheets. The slivers can be carried through downstream processes and cause damage to the surface of formed parts resulting in costly manual repair. T ....etc

[:=Read Full Message Here=:]