ABSTRACT
The manual method of
synchronization demands a skilled operator and the method is suitable
for no load operation or normal frequency condition. under emergency
condition such as lowering of frequency or synchronizing of large
machines a very fast action is needed, which may not be possible for a
human operator. Thus there is a need of autosynchroniser in a power
station or in an industrial establishment where generator are employed.
This paper describes a m ....etc

[:=Read Full Message Here=:]

ABSTRACT
The manual method of
synchronization demands a skilled operator and the method is suitable
for no load operation or normal frequency condition. under emergency
condition such as lowering of frequency or synchronizing of large
machines a very fast action is needed, which may not be possible for a
human operator. Thus there is a need of autosynchroniser in a power
station or in an industrial establishment where generator are employed.
This paper describes a m ....etc

[:=Read Full Message Here=:]

232/2015
Maximum: 100 marks
Time : 1 hour and 15 minutes

1. Before a mechanic get under a vehicle he should make sure that:
(A)The tyres are inflated
(B) He use a creeper
(C ) The jack handle is down
(D) The vehicle is on safety stands

2. In automobile servicing concept what is meant by Tear down”?
(A) Adjusting
(B)Disassembling
(C ) Reassembling
(D)Machining

3.Which is most suitable to check spark plug gap?
(A) Feeler gauges
(B)Micrometer
(C ) Wire gauges
(D)Vernier caliper

4.The reading of a me ....etc

[:=Read Full Message Here=:]

ABSTRACT
The manual method of
synchronization demands a skilled operator and the method is suitable
for no load operation or normal frequency condition. under emergency
condition such as lowering of frequency or synchronizing of large
machines a very fast action is needed, which may not be possible for a
human operator. Thus there is a need of autosynchroniser in a power
station or in an industrial establishment where generator are employed.
This paper describes a m ....etc

[:=Read Full Message Here=:]

Electrical load on power system varies and it never be constant. To economically meet the requirement of variable load and to assure continuous supply the number of generator unit connected to the system bus bar are varied suitably.

The synchronization requires fulfillment of various conditions like
(1) Same phase sequence
(2) Equality of frequency and voltage between incoming machine and bus.

At present the synchronization is done manually by using conventional analog instruments. The ....etc

[:=Read Full Message Here=:]

A Seminar Report
On
FRACTIONAL FREQUENCY TRANSMISSION SYSTEM


ABSTRACT
Present day Power System uses the frequency of 50Hz and facing some
Voltage and Power stability problems. In order to limit the problem a new method is
proposed. The Fractional Frequency Transmission System (FFTS) is a very promising
long-distance transmission approach, which uses lower frequency (50/3 Hz) to reduce
the electrical length of the ac power line, and thus, its transmission capacity can be
increased several fold. The ....etc

[:=Read Full Message Here=:]

Hi friend
My Project topic is DETECTING POWER GRID SYNCHRONIZATION FAILURE ON VOLTAGE OR FREQUENCY
Please help me about this????????????
Application?????
Future scope?
advantage?????????
disadvantages?
conclusion??????????????
....etc

[:=Read Full Message Here=:]

ABSTRACT
The manual method of
synchronization demands a skilled operator and the method is suitable
for no load operation or normal frequency condition. under emergency
condition such as lowering of frequency or synchronizing of large
machines a very fast action is needed, which may not be possible for a
human operator. Thus there is a need of autosynchroniser in a power
station or in an industrial establishment where generator are employed.
This paper describes a m ....etc

[:=Read Full Message Here=:]

ABSTRACT
The manual method of
synchronization demands a skilled operator and the method is suitable
for no load operation or normal frequency condition. under emergency
condition such as lowering of frequency or synchronizing of large
machines a very fast action is needed, which may not be possible for a
human operator. Thus there is a need of autosynchroniser in a power
station or in an industrial establishment where generator are employed.
This paper describes a m ....etc

[:=Read Full Message Here=:]

1. GSM BASED SMART SENSOR FOR INDUSTRIAL AUTOMATIC FAULT DIAGNOSER WITH VOICE FACILITY

2. ADAPTIVE AUTOMOBILE HEADLIGHTS

3. WIRELESS MICROCONTROLLER BASED BLACK BOX FOR CAR

4. CELLPHONE OPERATED LAND ROVER

5. ELECTRONIC EMBEDDED DATA VERIFICATION AND CONTROL SYSTEM FOR AUTOMOBILES

6. ARTIFICIAL INTELLIGENCE

7. GSM BASED CENTRALIZED ELECTRICITY BILLING SYSTEM

8. MICROCONTROLLER BASED SPY ROBOTIC VEHICLE USING MOBILE TECHNOLOGY (SPYBOT)

9. SMART AMBULANCE

10. GSM NETWORK CONTROLLED ROBOT WITH VIDEO AND AUDIO COMMUNICATI ....etc

[:=Read Full Message Here=:]

Kindly pls mail me the ppt on this topicdetecting power grid synchronising failure on sensing voltage or frequency beyond acceptable range ....etc

[:=Read Full Message Here=:]