Magneto-optical current transformer technology (MOCT)

An accurate electric current transducer is a key component of any power system instrumentation. To measure currents power stations and substations conventionally employ inductive type current transformers with core and windings. For high voltage applications, porcelain insulators and oil-impregnated materials have to be used to produce insulation between the primary bus and the secondary windings. The insulation structure has to be designed car ....etc

[:=Read Full Message Here=:]

Surge current protection using superconductors

Introduction
The recent growth of power circuit capacities has caused fault currents to increase. Since the protection of power systems from the fault currents is very important, it is needed to develop a fault current limiter.

A fault current limiter is required to assure (1) rapid reaction to fault currents, (2) how impedance in normal operation and (3) large impedance during fault conditions. A super conducting fault current limiter (SCFCL) can meet these requirements superconductors, bec ....etc

[:=Read Full Message Here=:]

Slackware



Slackware was one of the earliest Linux distributions, and is the oldest distribution still being maintained. It was created by Patrick Volkerding of Slackware Linux, Inc. Slackware is primarily developed for the x86 PC hardware architecture. However there have previously been official ports to the DEC Alpha and SPARC architectures. As of 2005, there is an official port to the System/390 architecture. There are also unofficial ports to the ARM, Alpha, SPARC, PowerPC and x86-64 slamd64 architectures. Slackware's latest stable x8 ....etc

[:=Read Full Message Here=:]

The recent growth of power circuit capacities has caused fault currents to increase. Since the protection of power systems from the fault currents is very important, it is needed to develop a fault current limiter.

A fault current limiter is required to assure (1) rapid reaction to fault currents, (2) how impedance in normal operation and (3) large impedance during fault conditions. A super conducting fault current limiter (SCFCL) can meet these requirements superconductors, because of their sharp transition from zero resistance at normal cu ....etc

[:=Read Full Message Here=:]

Abstract
This paper presents an analytic current model for capacitively coupled Single-Electron Tunneling Transistors (SETTs) that is based on a modified M-state steady-state master equation. Based on this current model we also derive a current noise model for SETT. To validate the proposed models we calculate their characteristics at different device parameters and different operation temperatures and compare them with the corresponding characteristics calculated by the full master equation method. The results indicate that the propo ....etc

[:=Read Full Message Here=:]

Hi am Mohamed i would like to get details on iso 10303 21 pdf ..My friend Justin said iso 10303 21 pdf will be available here and now i am living at ......... and i last studied in the college/school ......... and now am doing ....i need help on ......etc ....etc

[:=Read Full Message Here=:]

Slackware was one of the earliest Linux distributions, and is the oldest distribution still being maintained. It was created by Patrick Volkerding of Slackware Linux, Inc. Slackware is primarily developed for the x86 PC hardware architecture. However there have previously been official ports to the DEC Alpha and SPARC architectures. As of 2005, there is an official port to the System/390 architecture. There are also unofficial ports to the ARM, Alpha, SPARC, PowerPC and x86-64 slamd64 architectures. Slackware's latest stable x86 release is 10.2 ....etc

[:=Read Full Message Here=:]

Hi this is sunita here. I wanted detailed information on the working of ISO loop magnetic couplers, their advantages over optocouplers and their future scope? ....etc

[:=Read Full Message Here=:]

Common mode rejection ratio (CMRR) is important performance parameter of any difference amplifier. It is the ratio of the differential gain to the common-mode gain, generally expressed in dB. It signifies the ability of an opamp to reject common mode signal, the signal which appears simultaneously at both its input terminals. The CMRR is of great importance when it comes to noise rejection. For applications involving high CMRR, instrumentation amplifiers consisting of three opamps are generally used. It has a major disadvantage that the value o ....etc

[:=Read Full Message Here=:]

Definition

An accurate electric current transducer is a key component of any power system instrumentation. To measure currents power stations and substations conventionally employ inductive type current transformers with core and windings. For high voltage applications, porcelain insulators and oil-impregnated materials have to be used to produce insulation between the primary bus and the secondary windings. The insulation structure has to be designed carefully to avoid electric field stresses, which could eventually cause insulation breakdo ....etc

[:=Read Full Message Here=:]