Design considerations for human-machine interfaces in cable-based parallel manipulators for physiotherapy applications
Abstract.
In this paper, we have addressed the attention to outline problems and preliminarysolutions for feasible human-machine interfaces in using cable-based parallel manipulators forphysiotherapy applications. In particular, general considerations are discussed fromengineering viewpoints but by taking into account constraints from acceptance and reluctanceby patients and physiotherapist users. Main attention has ....etc

[:=Read Full Message Here=:]

Roadside Kiosk-Assisted Traffic Data: Roadside wireless servers that communi- cate with passing traffic and give them information about their route. For example, a car programmed with GPS would ask for information regarding its future path, as well as give information about where it had just been. Thus, the cars can learn of traffic, accidents, and other situations which may prompt action. ....etc

[:=Read Full Message Here=:]

Design Considerations for High-Speed Low-Power Low-Voltage CMOS Analog-to-Digital Converters


Introduction
The realization of signal sampling and quantization at high sample rates
with low power dissipation is an important goal in many applications, including
portable video devices such as camcorders, personal communication
devices such as wireless LAN transceivers, in the read channels of magnetic
storage devices using digital data detection, and many oth ....etc

[:=Read Full Message Here=:]

Abstract—
One major goal of the vehicular ad hoc network(VANET) is to improve driving safety. However, theVANET may not guarantee timely detection of dangerous roadconditions or maintain communication connectivity when thenetwork density is low (e.g., in rural highways), which maypose as a big threat to driving safety. Towards addressingthe problem, we propose to integrate the VANET with theinexpensive wireless sensor network (WSN). That is, sensornodes are deployed along the roadside to sense road conditions,and to buffer and delive ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

by Matthew Galla Materials and Process Development

Circuit protection for rechargeable lithium-based battery cells and packs is a critical design consideration. Overcurrent and overtemperature conditions that can result from accidental shorting or abusive/runaway charging can raise temperatures high enough to damage components and cause substantial equipment damage.
Early circuit-protection designs relied on fragile one-shot fuses to provide total current interruption for overcurrent protection. However, because the majority of f ....etc

[:=Read Full Message Here=:]

plz i need a full report on design consideration for roadside safety ....etc

[:=Read Full Message Here=:]

1. Introduction
Roadside Verges have long been known to be valuable ecologically, although their intrinsic importance can also be very variable. They can provide a locally significant wildlife resource in themselves as well as provide wildlife corridors connecting sites within otherwise impoverished biodiversity landscapes. It has been estimated that there are 3000km of verges in Hertfordshire. However, in order to effectively look at the issue of the wildlife importance of roadside verges, a number of aspects need to be considered. These in ....etc

[:=Read Full Message Here=:]

By
Aditya Varakantam

Professor
Dr.Ravi Mukkamala

Overview
Definition
Motivation for providing Router Security
Router security considerations
Router Security Policy
Switch security considerations
Conclusion
References

Definition
Router
Router is a device which extracts the destination address from the incoming packet and sends it to the destination through the optimal path. Directing data between portions of a network is the purpose of a router.

Routers operate at the ....etc

[:=Read Full Message Here=:]

Abstract
Sustainable operation of battery powered wireless embedded systems (such as sensor nodes) is a key challenge, and considerable research effort has been devoted to energy optimization of such systems. Environmental energy harvesting, in particular solar based, has emerged as a viable technique to supplement battery supplies. However, designing an efficient solar harvesting system to realize the potential benefits of energy harvesting requires an in-depth understanding of several factors. For example, solar energy supply is high ....etc

[:=Read Full Message Here=:]