Power frequency magnetic fields as high as 15,000,000 milligauss are commonly found internally in equipment such as power transformers, motors and generators .Although these fields are almost contained within the equipment ,some leakage will occur. This paper concentrates on magnetic fields in the range of zero to several hundred milligauss. This level of magnetic field may be experienced by the general public as a result of operation of electrical equipment, current carrying lines, house wiring, electrical appliances, lighting equipment or an ....etc

[:=Read Full Message Here=:]

Radio-frequency identification (RFID)




Radio-frequency identification (RFID) is an automatic identification method, relying on storing and remotely retrieving data using devices called RFID tags or transponders.
An RFID tag is an object that can be applied to or incorporated into a product, animal, or person for the purpose of identification using radio waves. Some tags can be read from several meters away and beyond the line of sight of the reader.
A basic RFID system consists of three components:
• An antenna or coil
• ....etc

[:=Read Full Message Here=:]

Definition
Multi Carrier Modulation is a technique for data transmission by dividing a high ?]bit rate data stream is several parallel low bit ]rate data streams and using these low bit rate data streams to modulate several carriers. Multi Carrier Transmission has a lot of useful properties such as delay spread tolerance and spectrum efficiency that encourage their use in untethered broadband communications. OFDM is a multi carrier modulation technique with densely spaced sub carriers that has gained a lot of popularity among the broadband com ....etc

[:=Read Full Message Here=:]

Frequency Division Multiple Access Used for AMPS and TACS, the two key analog systems and their variants, this system gives each conversation its own unique radio channel. Division of a radio frequency into several channels by splitting the frequency band into distinct segments, which are assigned to various callers. This allows a single base station to serve many callers. For example, a typical AMPS network will have 832 channels spaced approximately 30 kilohertz apart. - Frequency Division Multiple Access, digital transmission technology that ....etc

[:=Read Full Message Here=:]

Definition

RF light sources follow the same principles of converting electrical power into visible radiation as conventional gas discharge lamps. The fundamental difference between RF lamps and conventional lamps is that RF lamps operate without electrodes .the presence of electrodes in conventional florescent and High Intensity Discharge lamps has put many restrictions on lamp design and performance and is a major factor limiting lamp life.

Recent progress in semiconductor power switching electronics, which is revolutionizing many facto ....etc

[:=Read Full Message Here=:]

After years of research and development, radio frequency light sources are just now becoming a mainstream lighting option. RF light sources follow the same principles of converting electrical power into visible radiation as conventional gas discharge lamps. The fundamental difference between RF lamps is that RF lamps operate without electrodes .There are three practical ways to energize RF light sources, though there are more ways to create RF plasmas. These three ways correspond to different types of interaction of electroma ....etc

[:=Read Full Message Here=:]

sir i need a rfid based security system ppt ....etc

[:=Read Full Message Here=:]

A Technique for Orthogonal Frequency Division Multiplexing
Frequency Offset Correction

Abstract:
The Orthogonal Frequency Division Multiplexing (OFDM) is a Multi Carrier Modulation technique employing Frequency Division Multiplexing of orthogonal subcarriers. It is also sometimes called as discrete multitone modulation (DMT). It is better than CDMA in high bit rate and Broadband Communications .It is a multi carrier technique, which is very sensitive to Frequency Offset between transmitter and receiver. Th ....etc

[:=Read Full Message Here=:]

Radio-frequency identification


Radio-frequency identification (RFID) is the use of an object applied to or incorporated into a product, animal, or person for the purpose of identification and tracking using radio waves. Some tags can be read from several meters away and beyond the line of sight of the reader.

Most RFID tags contain at least two parts. One is an integrated circuit for storing and processing information, modulating and demodulating a radio-frequency (RF) signal, and other specialized functions. The second is an antenna ....etc

[:=Read Full Message Here=:]

pls send me the report of RFID..
my email is [email protected] ....etc

[:=Read Full Message Here=:]