Implementing Embedded Speed Control for AC Induction Motors



Physics of Induction Motors

•Current passing through a conductor creates magnetic field–Direction of magnetic field is determined by the right hand rule•Changing magnetic field produces current in a conductor–Direction of current is determined by right hand rule•Electromagnetic Induction–Changing current induces changing magnetic field around it. –A conductor placed in this field has induced current and induced magnetic field•Inte ....etc

[:=Read Full Message Here=:]

can u give any details about DSP based speed estimation of single phase induction motors ....etc

[:=Read Full Message Here=:]

This article is presented by:
O. Barambones∗, A.J. Garrido∗, F.J. Maseda∗ and P. Alkorta†Speed Sensorless Vector Control of Induction Motors Based on
Robust Adaptive Variable Structure Control Law

ABSTRACT
A novel sensorless adaptive robust control law is proposed to improve the trajectory tracking performance of induction motors. The proposed design employs the so called vector (or field oriented) control theory for the induction motor drives and the designed ....etc

[:=Read Full Message Here=:]

Presented by-
MOINUDDIN M SHIRBADGI


Abstract - Some form of simple control is needed for small induction motors. This paper proposes a simple speed control method for small induction motors using a simple calculation without the need for a speed sensor. In this method, the load torque is estimated from the detected power factor of the induction motor and the speed of the induction motor is compensated for by a frequency-boost technique. The boost frequency is selected from a data table measured before hand. Sa ....etc

[:=Read Full Message Here=:]

DTMF Based Interfacing and Control of Induction Motor using TRIAC



The AC induction motor is the most commonly used AC motor in industrial application because of its simplicity, rugged construction, and relatively low manufacturing costs. The reason that the AC induction motor has these characteristics is because the rotor is a self-contained unit, with no external connections. This types of motor devices its name from the fact that AC currents are induced into the rotor by a rotating magnetic field.
Our project d ....etc

[:=Read Full Message Here=:]

CAN-based Synchronized Motion Control for Induction Motors

Abstract:

A control area network (CAN) based multi-motor synchronized motion control system with an advanced synchronized control strategy is proposed. The strategy is to incorporate the adjacent cross-coupling control strategy into the sliding mode control architecture. As illustrated by the four-induction-motor-based experimental results, the multi-motor synchronized motion control system, via the CAN bus, has been successfully implemented. With the emplo ....etc

[:=Read Full Message Here=:]

Abstract:
The field oriented control emerged as an important approach for the control of AC machines, and continues to be explored and developed in the literature. The estimation of the rotor flux from the measurable variables was the only method used to implement the vector control of the induction machine. To replace the estimator based on the mathematical model of the system, which can lead to unintended errors due to uncertainties on the model and on the measures we use an appropriate observer.

Presented By:
Ch ....etc

[:=Read Full Message Here=:]

....etc

[:=Read Full Message Here=:]

73. RF CONTROL OF INDUCTION MOTORS AND OTHER INDUSTRIAL LOADS
# can I know more information about that Topic?
# and where can this project apply? :idea::D ....etc

[:=Read Full Message Here=:]

send clear details about this project ....etc

[:=Read Full Message Here=:]