Abstract
Two major factors that limit the throughput inmulti-hop wireless networks are the unreliability of wirelesstransmissions and co-channel interference. One promising techniquethat combats lossy wireless transmissions is opportunisticrouting (OR). OR involves multiple forwarding candidates torelay packets by taking advantage of the broadcast nature andspacial diversity of the wireless medium. Furthermore, recentadvances in multi-radio multi-channel transmission technologyallows more concurrent transmissions in the network, and sh ....etc

[:=Read Full Message Here=:]

A Multi-cell Linear Power Amplifier for Driving Piezoelectric Loads
RAKESH K P
S-7 AEI
Roll No: 48
College Of Engineering , Trivandrum
2007-11 batch


Introduction
Describes about multicell amplifier , developed by connecting floating signal modules in series to drive piezoelectric devices.


PIEZOELECTRIC devices or actuators have been used as positioners or driving motors in many fields such as optics, precision machining, and fluid control, as well as in optical disk dri ....etc

[:=Read Full Message Here=:]

Abstract—
In order to get reliable communication no matter
under the water or above the surface, a kind of multi channel
and distributed wireless communication network architecture
for UUVs was presented. This network architecture includes
underwater communication, surface communication and
internal communication. Underwater communication is
acoustic modem, and the surface communication consists of
RF, Wi-Fi, BeiDou. Internal communication portal is
TCP/UDP. In order to avoid interference and decrease the
navigation resistanc ....etc

[:=Read Full Message Here=:]

i need information n about this project i am planning to do this project please mail me the reports of this or abstract of this project title. ....etc

[:=Read Full Message Here=:]

MULTI CHANNEL LOGIC ANALYZER


A logic analyzer is an electronic instrument that displays signals in a digital
circuit that are too fast to be observed and presents it to a user so that the user can
more easily check correct operation of the digital system. They are typically used for
capturing data in systems that have too many channels to be examined with an
oscilloscope. Isolation will be provided between the controller & the input signal in So
that the controller will not be da ....etc

[:=Read Full Message Here=:]

i want more details about multi channel voltage scanner ....etc

[:=Read Full Message Here=:]

Design and implementation of multi-channel CAN Communication Interface based on Embedded Linux
Abstract –
According to the communication and controlrequirement of multi-channel Control Area Network(CAN)bus by the HLA simulation platform, this paper described aembedded PowerPC system based method of design andimplementation of multi-channel CAN communicationplatform. The corresponding Linux multi-channel CAN devicedriver has also been developed. This flexible system canconnect to different number of CAN daughter boards. It canwork st ....etc

[:=Read Full Message Here=:]

This article is presented by:
Shouqian Yu
Lili Yi
Weihai Chen
Zhaojin Wen
Implementation of a Multi-channel UART
Controller Based on FIFO Technique and FPGA

Abstract:
To meet modern complex control systems communication demands, the paper presents a multi-channel UART controller based on FIFO(First In First Out) technique and FPGA(Field Programmable Gate Array). The paper presents design method of asynchronous FIFO and structure o ....etc

[:=Read Full Message Here=:]

Abstract
In this paper, an effort has been made todesign and developed a 4-channel data logger for indoorenvironment. Initially the present work hasconcentrated to environmental parameter (temperatureand humidity) and more polluted contaminants(concentration level of CO and CO2). The Data logger isproposed to be developed with the use ofmicrocontroller PIC 18F4458 (inbuilt 8 channel ADC),i.e. 4 channels will be used and 4 channel will open inexternal sensor. Real Time Clock is also interfaced forsampled data with the instance of sampli ....etc

[:=Read Full Message Here=:]

Abstract
With the increase of usage of wireless networks for purposes where the nodes are either stationary or minimally mobile, focus is also on increasing the network capacity of wireless networks. One such way is to use non-overlapping multiple channels provided by 802.11 by using multiple interfaces per node. Multiple nonoverlapped channels exist in the 2.4GHz and 5GHz spectrum. However, most IEEE 802.11-based multihop ad hoc networks today use only a single channel. As a result, these networks rarely can fully exploit the aggrega ....etc

[:=Read Full Message Here=:]