pro engineer tutorial


Protrusions, cuts, slots

Extruding
Revolve
Sweep
Blend
Use quilt
advanced

Solid Vs Thin

Solid:
The sections feature is completely enclosed with material.

Thin:
The walls of the section are protruded with the provided wall thickness only.
....etc

[:=Read Full Message Here=:]

IC Engine Research Engineer,



Responsibilities

An IC engine research engineer works within multidisciplinary teams on the engines and fuels of tomorrow, in liaison with car manufacturers, parts suppliers and oil industry players. Responsible for R&D studies, he/she: analyzes and understands how internal combustion systems work; develops and uses calculation codes for engine and vehicle modeling and simulation; designs and develops innovative combustion systems; communicates with respect to his/ ....etc

[:=Read Full Message Here=:]

BROADCAST ENGINEER


DEFINITION
Designs, installs, operates, maintains, repairs, and modifies all types of specialized equipment in a modern broadcast television studio and a motion picture post-production studio.

TYPICAL DUTIES
Designs, operates, installs, maintains, and/or repairs a wide variety of equipment used in TV studios, such as Plumbicon and CCD (Charged Coupled Devices) cameras, digital cameras, serial and parallel digital VCRs, production ....etc

[:=Read Full Message Here=:]

Abstract

The accuracy of the precise machines (e.g. Coordinate measuring machines) is of micrometer range and even less. The play of the bearings, the change of the position of moving parts, wear, environment influence, etc. reduce the final accuracy. The existing methods to increase the accuracy of precise equipment are complicated and of high cost. The authors present a new concept in the design of error compensating systems - active frames and structures for precision technological equipment and measuring machines. It is proposed to inser ....etc

[:=Read Full Message Here=:]

1.A cycle consists of two isothermal and two isentropic processes is known as :
(A)Otto cycle(B) Joule cycle
(C )Stirling cycle(D)Carnotcycle

2.In an isometric projection the radius of a sphere it is equal to :
(A)0.82 R(B)R
(C )1.22 R(D)2 R

3.The function of steam nozzle is to convert:
(A)heat energy steam into kinetic energy
(B)heat energy steam into rotational energy
(C )kinetic energy into heat energy of steam
(D)heat energy steam into pressure energy

4.Dryness fraction is the ratio of:
(A)mass of dry st ....etc

[:=Read Full Message Here=:]

Presented By:
Fredrik Roos and Jan Wikander



Abstract
In traditional methodologies for mechatronic design, the design processes of the mechanical structure, the electromechanical actuators and the control system, is more or less independent of each other. The mechanical structure is usually designed first, then fitted with off-the-shelf electric motors and drive electronics, and finally, a controller is designed for the already existing physical system. This approach leads to that many of the possible advantages of mechatronic ....etc

[:=Read Full Message Here=:]

 

Time : 1 hour and 15 minutes
1Hooke’s law is valid :
(A) Only above elastic limit ((B) Only within elastic limit
(C ) Only within plastic limit (D) Till breaking of substance


2The bending moment on a section is maximum where shear force is :
(A) Zero (B) Minimum
(C ) Changing sign (D) Maximum


3The bending moment diagram for a cantilever carrying uniformly distributed load will be :
(A) A triangle (B) A parabola
(C ) A cubic parabola (D) A rectangle


4. The moment of inertia of a circular section, ab ....etc

[:=Read Full Message Here=:]

Abstract

In this paper, we discuss the design of a ball-on-plate balancing system. The conception and development of the ball-on-plate system are outlined with an emphasis on mechatronic design principles. Realization of the design is made with the simultaneous consideration towards constraints like cost, performance, functionality, extendibility, and educational merit.

The physical system consists of an acrylic plate, an actuation mechanism for the plate, a ball position sensor, instrumentation for signal processing, and real-time contr ....etc

[:=Read Full Message Here=:]

i need a project ideal and materials for proposal on power supply problem in mechatronic (robot). ....etc

[:=Read Full Message Here=:]

1.A cycle consists of two isothermal and two isentropic processes is known as :
(A)Otto cycle(B) Joule cycle
(C )Stirling cycle(D)Carnotcycle

2.In an isometric projection the radius of a sphere it is equal to :
(A)0.82 R(B)R
(C )1.22 R(D)2 R

3.The function of steam nozzle is to convert:
(A)heat energy steam into kinetic energy
(B)heat energy steam into rotational energy
(C )kinetic energy into heat energy of steam
(D)heat energy steam into pressure energy

4.Dryness fraction is the ratio of:
(A)mass of dry st ....etc

[:=Read Full Message Here=:]