How to differentiate between Shear wall and columns just by looking at the dimensions? ....etc

[:=Read Full Message Here=:]

ABSTRACT

Civionics is a new term coiner from Civil-Electronics, which is derived from the application of electronics to civil structures. Only a few years after the invention of low-loss optical fiber, it became apparent that optical fiber can not only reliably transmit data, but also provide remarkable sensing capabilities. These sensing capabili¬ties combined with unique properties offered by optical fibers, such as total dielectric design, complete immunity to electromagnetic interference, small size, capability for distributed s ....etc

[:=Read Full Message Here=:]

Presented By
P.BRAHMESHWAR RAO
G.SURYA MOHAN REDDY
M.HEMANTH
K.V.ANURAG REDDY


FINITE ELEMENT ANALYSIS OF A GEAR TOOTH USING ANSYS AND STRESS REDUCTION BY STRESS RELIEF HOLE
ABSTRACT
 The main aim of this project is to model a spur gear by PRO-E. The model is then imported to ANSYS
 To reduce the stress in a gear tooth, with the help of a stress relief hole, to the minimum value, without affe ....etc

[:=Read Full Message Here=:]

SHEAR STRENGTH IN PREEXISTING LANDSLIDES

SEMINAR REPORT
By

SHILPA.S.S

DEPARTMENT OF CIVIL ENGINEERING
COLLEGE OF ENGINEERING
THIRUVANANTHAPURAM
2010




Abstract

Drained residual shear strength is used for the analysis of slopes containing preexisting shear surfaces. Some recent research suggests that preexisting shear surfaces in prior landslides can gain strength with time. Torsional ring and direct shear tests performed during this study show that th ....etc

[:=Read Full Message Here=:]

hi my name is harikrishna
i am doing my M.E project on ''effects of openings in shear wall analysis''
by using e-tabs software.
so i need some material (ppt,documentation)


thank u... ....etc

[:=Read Full Message Here=:]

SEMINAR REPORT ON EVALUATION OF FLOW LIQUEFACTION AND LIQUEFIED SHEAR STRENGTH USING CONE PENETRATION TEST


ABSTRACT

Flow liquefaction is a major design issue for large soil structures such as mine tailings impoundments and earth dams. If a soil is strain softening in undrained shear and, hence, susceptible to flow liquefaction, an estimate of the resulting liquefied shear strength is required for stability analyses. Many procedures have been published for estimating the residual or liquefie ....etc

[:=Read Full Message Here=:]

KLE College of Engineering Belgaum

INTRODUCTION
Shear walls are vertical elements of the horizontal force resisting system. Shear walls are constructed to counter the effects of lateral load acting on a structure. In residential construction, shear walls are straight external walls that typically form a box which provides all of the lateral support for the building.When shear walls are designed and constructed properly, and they will have the strength and stiffness to resist ....etc

[:=Read Full Message Here=:]

hello...
sir, i am just a beginner..
i would be highly obliged if i could get block shear failure in tension members videos..
thank you. ....etc

[:=Read Full Message Here=:]

BLOCK SHEAR FAILURE IN TENSION MEMBERS
ABSTRACT
Block shear is a limit state that should be accounted for during the design of steel tension members. This failure mechanism combines a tensile failure on one plane and a shear failure on a perpendicular plane. It is important for a design equation not only to predict the capacity reliably, but also to predict accurately the failure mode.
In this study, we begin with an overview of tension members, their behaviour and design strength which is affected by yielding, fracture or ....etc

[:=Read Full Message Here=:]

VARIATION OF DAMPING RATIO AND SHEAR MODULUS WITH PLASICITY INDEX AND CONFINING PRESSURE

INTRODUCTION
Behaviour of soil under cyclic loading is non-linear

Non-linear behaviour commonly characterised by:

Damping coefficient, D

Shear modulus, G


DEFINITION
Damping coefficient
Is defined as the measure of energy dissipation
Shear modulus
Is the ratio of shear stress to shear strain
Plasticity index
Is the difference between liquid limit and plastic
limit
Confining pre ....etc

[:=Read Full Message Here=:]