RESINSThermosetting &Thermoplastic resins
Introduction
Resins
The primary functions of the resin are to transfer stress between the reinforcing fibers, act as a glue to hold the fibers together, and protect the fibers from mechanical and environmental damage.
Resins are divided into two major groups known as thermoset and thermoplastic.
Thermoplastic Resins
Process
The curing process transforms the resin into a plastic or rubber by a cross-linking process. Energy and/or catalysts are added that ....etc

[:=Read Full Message Here=:]

Fiber Reinforced Concrete
“FRC is defined as a composite material consisting of concrete reinforced with discrete randomly but uniformly dispersed short length fibers.”
Fibers are generally discontinuous, randomly distributed through out the cement matrices.
Enhances flexural and tensile strength of the concrete.
Fibers may generally be classified into two: organic and inorganic.
Contd. ….
Volume fraction – measure of fiber in concrete.
Typically ranges from 0.1 to 3%.
Aspect ratio - fiber length (l) ....etc

[:=Read Full Message Here=:]

A SEMINAR REPORT ON UTILTY FOG
Submitted by:ABHINAVARVIND
COMPUTER SCIENCE AND ENGINEERING
SCHOOL OF ENGINEERING
COCHIN UNIVERSITY OF SCIENCE AND TECHNOLOGY
KOCHI- 682022
ABSTRACT
Nanotechnology is the use of nanometer-sized particles in ways that employ novel or unusual properties with limitless possibilities. The concept of utility fog is introduced as a useful provocation for imagining nanotechnology and its implications in the future. A description of the technical specifications and uses of utility fog are provided. Utility fog is ....etc

[:=Read Full Message Here=:]

Abstract
In many areas of the world, finding the type of timber or particle board needed to build a good quality wooden board is becoming a problem. As a result, particle board is beginning to be used by many wooden photo laminators. The information provided in this project report relates specifically to the production of an open fishing photo lamination. It is a simple, easily-formed, room worthy thing. Its general-purpose design is suitable for inside the room/office or around the area.
A general basic knowledge in the use of polyest ....etc

[:=Read Full Message Here=:]

full project report of polyester staple fibre plant
please provide me full project report for polyester fiber plant ....etc

[:=Read Full Message Here=:]

Submitted by:
MOHSIN QURESHI
MUNISHWAR MESHRAM
PANKAJ RAMTEKKAR
PIYUSH BAHAD
ROSHAN MESHRAM
SAURABH KOKASH
TILAK BAMBAL


1.0 INTRODUCTION
1.1 COMPANY PROFILE
Indo Rama Synthetics (India) Limited (IRSL) - a multinational group with its presence in Indonesia, Srilanka, Thailand, .Bangladesh etc, was established in India in 1989 with a commitment to quality and customer satisfaction for execution of spinning operations at Pitampur (lndore).
It's exposure to international operations gave it a co ....etc

[:=Read Full Message Here=:]

PEDESTRIAN SAFETY AT UNSIGNALISED CROSSINGS
SEMINAR REPORT
Submitted by
KEERTHY BALAN
M1 Traffic and Transportation Engineering
DEPARTMENT OF CIVIL ENGINEERING
COLLEGE OF ENGINEERING
THIRUVANANTHAPURAM
2010





1. INTRODUCTION
1.1. GENERAL
A pedestrian is a person travelling on foot, whether walking or running. Pedestrians are the vulnerable road users. Pedestrian vehicular interaction decides the vehicular flow characteristics especially where there is a large pedestrian cros ....etc

[:=Read Full Message Here=:]

1. The-------------fiber has a standard regain of 17-18%.
(A) Polyester(B)WoolWool
(C ) Silk(D)Acrylic

2.It is a modification of plain weave :
(A) Brighton honey comb(B)SateenSateen
(C ) Hopsack(D)SatinSatin

3.10 Tex yarn is approximately equivalent to the Count in English system of yarn numbering
is :
(A) 10s(B)19s
(C ) 69s(D)59s

4.It is an example of regenerated fiber :
(A) Viscose rayon(B)OrlonOrion
(C ) Jute(D)AcrylicAcrylic

5.Hydrogen peroxide bleaching of cotton can be done with an optimum conditi ....etc

[:=Read Full Message Here=:]

Study of the mechanical behaviour of a macroscopic
glass–polyester composite by ESPI method and numerical simulations


Alberto Corigliano a, , Enrico Papa a, AndreaPavan

Department of Structural Engineering, Politecnico di Milano, Piazza Leonardo da Vinci, 32. 20133 Milano, Italy
b Department of Chemistry, Materials and Chemical Engineering ‘‘Giulio Natta’’, Piazza Leonardo da Vinci, 32. 20133 Milano, Italy


Abstract
This paper presents results of an experimental ....etc

[:=Read Full Message Here=:]

Definition
Nanofog is a highly advanced nanotechnology, which the Technocratic Union has developed as the ultimate multi-purpose tool. It is a user-friendly, completely programmable collection of avogadro (6 x1023) numbers of nanomachines that can form a vast range of machinery, from wristwatches to spaceships. It can simulate any material from gas, liquid, and solid, and it can even be used in sufficient quantities to implement the ultimate in virtual reality. ITx researchers suggest that more complex applications could include uploading huma ....etc

[:=Read Full Message Here=:]

Introduction:
Household items made of various kinds of plastic.
Plastic is the general common term for a wide range of synthetic or semisynthetic organic amorphous solid materials used in the manufacture of industrial products. Plastics are typically polymers of high molecular mass, and may contain other substances to improve performance and/or reduce costs. Monomers of Plastic are either natural or synthetic organic compounds.
The word is derived from the Greek past (plastikos) meaning fit for molding, and past ....etc

[:=Read Full Message Here=:]

Composites materials for aerospace applications
Abstract:
Fibre-reinforced polymer composite materials are fast gaining ground as preferred materials for construction of aircrafts and spacecrafts. In particular, their use as primary structural materials in recent years in several technology-demonstrator front-line aerospace projects world-wide has provided confidence leading to their acceptance as prime materials for aerospace vehicles. This paper gives a review of some of these developments with a discussion of the proble ....etc

[:=Read Full Message Here=:]

Abstract
In many areas of the world, finding the type of timber or particle board needed to build a good quality wooden board is becoming a problem. As a result, particle board is beginning to be used by many wooden photo laminators. The information provided in this project report relates specifically to the production of an open fishing photo lamination. It is a simple, easily-formed, room worthy thing. Its general-purpose design is suitable for inside the room/office or around the area.
A general basic knowledge in the use of polyest ....etc

[:=Read Full Message Here=:]