sir Im b.tech mechanical 3rd year student ,
plz send turbocharger seminar project

....etc

[:=Read Full Message Here=:]

Presented By:
R.J. Stafford, J.M. Mulloy, T.M. Yonushonis, H.G. Weber, and M.J. Patel
Cummins Engine Company

INTRODUCTION

Turbocharging of diesel engines has enhanced fuel economy and reduced diesel engine emissions. The initial applications of turbochargers to heavy duty diesel engines during the early 1970's reduced Bosch smoke (a measure of particulate matter used at the time) from 2.4 to 0.6 units. At the same time, engine specific fuel consumption was reduced from 0.36 Ib./bhp-hr to 0.35 ib./bhp-hr. Since that time, a vari ....etc

[:=Read Full Message Here=:]

i am libin.I want to present a seminar presentation in my college.need all details about turbocharger. mainly concentrates on design of turbocharger ....etc

[:=Read Full Message Here=:]

TURBOCHARGER
A turbocharger consists of a compressor and a turbine linked by a shared axle so if the turbine rotates, the compressor also rotates. The turbine inlet receives exhaust gases from the engine causing it to rotate. This rotation in turn drives the compressor, which compresses the ambient air and delivers it to the intake manifold of an engine at higher pressure, resulting in greater amount of air entering the cylinder.
Now to some basics before we go ahead. There are two ways of increasing the power of an engin ....etc

[:=Read Full Message Here=:]

Presented by:
ANUP DUTTA

Introduction

The power out put of an engine depends upon the amount of air inducted per unit time and the degree of utilization of this air , and the thermal efficiency of the engine.
Indicated engine Power
IP=P*L*A*n*K/60000 ……………..(1)
Where, IP= indicated power (kW)
P=indicated mean effective pressure(N/m2)
L=length of stroke
A= area of piston
n= no of power stroke, for 2-s engine-N and for 4-s engine N/2, N= rpm
K= No of cylinders
....etc

[:=Read Full Message Here=:]

Design and Performance of a Gas-Turbine Engine from an Automobile Turbocharger




Introduction

The Massachusetts Institute of Technology Department of Mechanical Engineering teaches
thermodynamics and fluid mechanics through a pair of classes, Thermal Fluids Engineering
I & II. The courses cover the basic principles of thermodynamics, fluid mechanics, and heat
transfer. This includes the rate processes involved with heat and work transfer, steady flow
co ....etc

[:=Read Full Message Here=:]

Hello sir,
My name is omkar kolhatkar.I am the T.E.Production sandwich student.I want to give the seminar on turbochargers used in diesel engines.I want the seminar on this topic consisting of minimum 20 theory pages.I want it as soon as possible.Would you please help me? ....etc

[:=Read Full Message Here=:]

pls give me turbocharger vs supercharger ppt as earliest as possible this is very important for me but time is very less....
my presentation date will come closer. ....etc

[:=Read Full Message Here=:]

sir,
I am the mechanical engg.student,
I need full report on above project,
give me idea or information abut above topic,material required ,
from where this material purches ,
total cost required for this project,
I will waiting for your answer. ....etc

[:=Read Full Message Here=:]

Please give me a basic and advanced details of 2 wheeler turbocharger. My mail id is [email protected] ....etc

[:=Read Full Message Here=:]